RF Test Report

FCC ID: MG3-GB314

Test Report

Download: PDF
FCCID_4282467

FCC Test Report Report No.: RF190319C14 FCC ID: MG3-GB314 Test Model: GB314WJSA Received Date: Mar. 19, 2019 Test Date: Mar. 23, 2019 ~ Apr. 16, 2019 Issued Date: Apr. 17, 2019 Applicant: Universal Electronics Inc. Address: 201 East Sandpointe Ave 8th Floor Santa Ana CA 92707 USA Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Lab Address: No. 47-2, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan ( R.O.C ) Test Location: No.19, Hwa Ya 2nd Rd., Wen Hwa Vil., Kwei Shan Dist., Taoyuan City 33383, Taiwan, R.O.C. FCC Registration / 788550 / TW0003 Designation Number: This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. The report must not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. Report No.: RF190319C14 Page No. 1 / 34 Report Format Version: 6.1.1

Table of Contents Release Control Record .................................................................................................................................. 4 1 Certificate of Conformity ........................................................................................................................... 5 2 Summary of Test Results ........................................................................................................................... 6 2.1 Measurement Uncertainty ..................................................................................................................... 6 2.2 Modification Record .............................................................................................................................. 6 3 General Information ................................................................................................................................... 7 3.1 General Description of EUT .................................................................................................................. 7 3.2 Description of Test Modes..................................................................................................................... 8 3.2.1 Test Mode Applicability and Tested Channel Detail .................................................................... 9 3.3 Duty Cycle of Test Signal .................................................................................................................... 10 3.4 Description of Support Units ................................................................................................................ 11 3.4.1 Configuration of System under Test .......................................................................................... 11 3.5 General Description of Applied Standards ........................................................................................... 11 4 Test Types and Results ............................................................................................................................ 12 4.1 Radiated Emission and Bandedge Measurement .............................................................................. 12 4.1.1 Limits of Radiated Emission and Bandedge Measurement ..................................................... 12 4.1.2 Test Instruments ....................................................................................................................... 13 4.1.3 Test Procedures ........................................................................................................................ 14 4.1.4 Deviation from Test Standard ................................................................................................... 14 4.1.5 Test Set Up ............................................................................................................................... 15 4.1.6 EUT Operating Conditions ........................................................................................................ 16 4.1.7 Test Results .............................................................................................................................. 17 4.2 6 dB Bandwidth Measurement ............................................................................................................ 22 4.2.1 Limits of 6 dB Bandwidth Measurement ................................................................................... 22 4.2.2 Test Setup ................................................................................................................................. 22 4.2.3 Test Instruments ....................................................................................................................... 22 4.2.4 Test Procedure ......................................................................................................................... 22 4.2.5 Deviation from Test Standard ................................................................................................... 22 4.2.6 EUT Operating Conditions ........................................................................................................ 22 4.2.7 Test Results .............................................................................................................................. 23 4.3 Occupied Bandwidth Measurement .................................................................................................... 24 4.3.1 Test Setup ................................................................................................................................. 24 4.3.2 Test Instruments ....................................................................................................................... 24 4.3.3 Test Procedure ......................................................................................................................... 24 4.3.4 Deviation from Test Standard ................................................................................................... 24 4.3.5 EUT Operating Conditions ........................................................................................................ 24 4.3.6 Test Results .............................................................................................................................. 25 4.4 Conducted Output Power Measurement ............................................................................................ 26 4.4.1 Limits of Conducted Output Power Measurement.................................................................... 26 4.4.2 Test Setup ................................................................................................................................. 26 4.4.3 Test Instruments ....................................................................................................................... 26 4.4.4 Test Procedures ........................................................................................................................ 26 4.4.5 Deviation from Test Standard ................................................................................................... 26 4.4.6 EUT Operating Conditions ........................................................................................................ 26 4.4.7 Test Results .............................................................................................................................. 27 4.5 Power Spectral Density Measurement ............................................................................................... 28 4.5.1 Limits of Power Spectral Density Measurement ....................................................................... 28 4.5.2 Test Setup ................................................................................................................................. 28 4.5.3 Test Instruments ....................................................................................................................... 28 4.5.4 Test Procedure ......................................................................................................................... 28 4.5.5 Deviation from Test Standard ................................................................................................... 28 4.5.6 EUT Operating Condition ......................................................................................................... 28 4.5.7 Test Results .............................................................................................................................. 29 Report No.: RF190319C14 Page No. 2 / 34 Report Format Version: 6.1.1

4.6 Conducted Out of Band Emission Measurement ............................................................................... 30 4.6.1 Limits of Conducted Out of Band Emission Measurement ....................................................... 30 4.6.2 Test Setup ................................................................................................................................. 30 4.6.3 Test Instruments ....................................................................................................................... 30 4.6.4 Test Procedure ......................................................................................................................... 30 4.6.5 Deviation from Test Standard ................................................................................................... 30 4.6.6 EUT Operating Condition ......................................................................................................... 30 4.6.7 Test Results .............................................................................................................................. 31 5 Pictures of Test Arrangements................................................................................................................ 33 Appendix – Information of the Testing Laboratories ................................................................................. 34 Report No.: RF190319C14 Page No. 3 / 34 Report Format Version: 6.1.1

Release Control Record Issue No. Description Date Issued RF190319C14 Original Release Apr. 17, 2019 Report No.: RF190319C14 Page No. 4 / 34 Report Format Version: 6.1.1

1 Certificate of Conformity Product: Remote Controller Brand: Sharp Test Model: GB314WJSA Sample Status: Identical Prototype Applicant: Universal Electronics Inc. Test Date: Mar. 23, 2019 ~ Apr. 16, 2019 Standards: 47 CFR FCC Part 15, Subpart C (Section 15.247) ANSI C63.10:2013 The above equipment has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s RF characteristics under the conditions specified in this report. Prepared by : , Date: Apr. 17, 2019 Rona Chen / Specialist Approved by : , Date: Apr. 17, 2019 Dylan Chiou / Project Engineer Report No.: RF190319C14 Page No. 5 / 34 Report Format Version: 6.1.1

ommert 2 Summary of Test Results 47 CFR FCC Part 15, Subpart C (Section 15.247) FCC Clause Test Item Result Remarks 15.207 AC Power Conducted Emission N/A Without AC power port of the EUT Meet the requirement of limit. 15.205 & 209 Radiated Emissions Pass Minimum passing margin is —1.16 dB at 2483.52 MHz. 15.247(d) Band Edge Measurement Pass Meet the requirement of limit. 15.247(d) Antenna Port Emission Pass Meet the requirement of limit. 15.247(a)(2) 6 dB Bandwidth Pass Meet the requirement of limit. Occupied Bandwidth Measurement Pass Reference only 15.247(b) Conducted Power Pass Meet the requirement of limit. 15.247(e) Power Spectral Density Pass Meet the requirement of limit. 15.203 Antenna Requirement Pass No antenna connector is used. Note: Determining compliance based on the results of the compliance measurement, not taking into account measurement instrumentation uncertainty. 2.1 Measurement Uncertainty Where relevant, the following measurement uncertainty levels have been estimated for tests performed on the EUT as specified in CISPR 16—4—2: Expended Uncertainty Measurement Frequenc quency (k=2) (4) Conducted Emissions at mains ports 150 kHz ~ 30 MHz 244 dB 9 kHz ~ 30 MHz 3.04 dB Radiated Emissions up to 1 GHz 30 MHz ~ 200 MHz 2.93 dB 200 MHz ~ 1000 MHz 2.95 dB . 20. 1 GHz ~ 18 GHz 2.26 dB Radiated Emissions above 1 GHz 18 GHz ~ 40 GHz 1.94 dB 2.2 Modification Record There were no modifications required for compliance. Report No.: RF190319C14 Page No. 6 / 34 Report Format Version: 6.1.1

3 General Information 3.1 General Description of EUT Product Remote Controller Brand Sharp Test Model GB314WJSA Status of EUT Identical Prototype 3.0 Vdc (DC power supply) Power Supply Rating 3.0 Vdc (4 AAA batteries) Modulation Type GFSK Transfer Rate 1 Mbps Operating Frequency 2402 ~ 2480 MHz Number of Channel 40 Output Power 2.851 mW Antenna Type Inverted-F PCB antenna with 4.56 dBi gain Antenna Connector N/A Accessory Device N/A Data Cable Supplied N/A Note: 1. The above EUT information is declared by manufacturer and for more detailed features description, please refers to the manufacturer's specifications or User's Manual. Report No.: RF190319C14 Page No. 7 / 34 Report Format Version: 6.1.1

3.2 Description of Test Modes 40 channels are provided to this EUT: Channel Freq. (MHz) Channel Freq. (MHz) Channel Freq. (MHz) Channel Freq. (MHz) 0 2402 10 2422 20 2442 30 2462 1 2404 11 2424 21 2444 31 2464 2 2406 12 2426 22 2446 32 2466 3 2408 13 2428 23 2448 33 2468 4 2410 14 2430 24 2450 34 2470 5 2412 15 2432 25 2452 35 2472 6 2414 16 2434 26 2454 36 2474 7 2416 17 2436 27 2456 37 2476 8 2418 18 2438 28 2458 38 2478 9 2420 19 2440 29 2460 39 2480 Report No.: RF190319C14 Page No. 8 / 34 Report Format Version: 6.1.1

3.2.1 Test Mode Applicability and Tested Channel Detail EUT Configure Applicable To Description Mode RE1G RE<1G PLC APCM - √ √ - √ - Where RE1G: Radiated Emission above 1 GHz RE<1G: Radiated Emission below 1 GHz PLC: Power Line Conducted Emission APCM: Antenna Port Conducted Measurement Note: The EUT had been pre-tested on the positioned of each 3 axis. The worst case was found when positioned on X-plane. Radiated Emission Test (Above 1 GHz): Pre-Scan has been conducted to determine the worst-case mode from all possible combinations between available modulations, data rates and antenna ports (if EUT with antenna diversity architecture). Following channel(s) was (were) selected for the final test as listed below. EUT Configure Available Channel Tested Channel Modulation Type Data Rate (Mbps) Mode - 0 to 39 0, 19, 39 GFSK 1 Radiated Emission Test (Below 1 GHz): Pre-Scan has been conducted to determine the worst-case mode from all possible combinations between available modulations, data rates and antenna ports (if EUT with antenna diversity architecture). Following channel(s) was (were) selected for the final test as listed below. EUT Configure Available Channel Tested Channel Modulation Type Data Rate (Mbps) Mode - 0 to 39 39 GFSK 1 Antenna Port Conducted Measurement: This item includes all test value of each mode, but only includes spectrum plot of worst value of each mode. Pre-Scan has been conducted to determine the worst-case mode from all possible combinations between available modulations, data rates and antenna ports (if EUT with antenna diversity architecture). Following channel(s) was (were) selected for the final test as listed below. EUT Configure Available Channel Tested Channel Modulation Type Data Rate (Mbps) Mode - 0 to 39 0, 19, 39 GFSK 1 Test Condition: Applicable To Environmental Conditions Input Power Tested by RE1G 25 deg. C, 65 % RH 3.0 Vdc Tim Chen RE<1G 25 deg. C, 65 % RH 3.0 Vdc Tim Chen APCM 25 deg. C, 65 % RH 3.0 Vdc Wayne Lin Report No.: RF190319C14 Page No. 9 / 34 Report Format Version: 6.1.1

3.3 Duty Cycle of Test Signal Duty cycle = 0.412/0.593 = 0.695, Duty factor = 10 * log(1/0.695) = 1.58 Report No.: RF190319C14 Page No. 10 / 34 Report Format Version: 6.1.1

3.4 Description of Support Units The EUT has been tested as an independent unit together with other necessary accessories or support units. The following support units or accessories were used to form a representative test configuration during the tests. No. Product Brand Model No. Serial No. FCC ID 1. DC Power Supply Topward 33010D N/A N/A No. Signal Cable Description Of The Above Support Units 1. N/A Note: 1. All power cords of the above support units are non-shielded (1.8m). 3.4.1 Configuration of System under Test DC Power Supply EUT (Power from DC power supply) *Test Table 3.5 General Description of Applied Standards The EUT is a RF Product. According to the specifications of the manufacturer, it must comply with the requirements of the following standards: FCC Part 15, Subpart C (15.247) KDB 558074 D01 15.247 Meas Guidance v05r01 ANSI C63.10-2013 All test items have been performed and recorded as per the above standards. Report No.: RF190319C14 Page No. 11 / 34 Report Format Version: 6.1.1

4 Test Types and Results 4.1 Radiated Emission and Bandedge Measurement 4.1.1 Limits of Radiated Emission and Bandedge Measurement Radiated emissions which fall in the restricted bands must comply with the radiated emission limits specified as below table. Other emissions shall be at least 20 dB below the highest level of the desired power: Frequencies Field Strength Measurement Distance (MHz) (microvolts/meter) (meters) 0.009 ~ 0.490 2400/F (kHz) 300 0.490 ~ 1.705 24000/F (kHz) 30 1.705 ~ 30.0 30 30 30 ~ 88 100 3 88 ~ 216 150 3 216 ~ 960 200 3 Above 960 500 3 Note: 1. The lower limit shall apply at the transition frequencies. 2. Emission level (dBuV/m) = 20 log Emission level (uV/m). 3. For frequencies above 1000 MHz, the field strength limits are based on average detector, however, the peak field strength of any emission shall not exceed the maximum permitted average limits, specified above by more than 20 dB under any condition of modulation. Report No.: RF190319C14 Page No. 12 / 34 Report Format Version: 6.1.1

4.1.2 Test Instruments Description & Due Date of Model No. Serial No. Date of Calibration Manufacturer Calibration Test Receiver N9038A MY51210203 Mar. 18, 2019 Mar. 17, 2020 Agilent Spectrum Analyzer N9010A MY52220314 Dec. 13, 2018 Dec. 12, 2019 Agilent Spectrum Analyzer FSU43 100115 Jan. 21, 2019 Jan. 20, 2020 ROHDE & SCHWARZ BILOG Antenna VULB 9168 9168-472 Nov. 23, 2018 Nov. 22, 2019 SCHWARZBECK Horn Antenna BBHA 9120D 9120D-969 Nov. 25, 2018 Nov. 24, 2019 SCHWARZBECK HORN Antenna BBHA 9170 9170-480 Nov. 25, 2018 Nov. 24, 2019 SCHWARZBECK Loop Antenna HLA 6121 45745 Jun. 14, 2018 May 18, 2019 Preamplifier EMC 012645 980115 Oct. 12, 2018 Oct. 11, 2019 EMCI Preamplifier EMC 184045 980116 Oct. 12, 2018 Oct. 11, 2019 EMCI Preamplifier EMC 330H 980112 Oct. 12, 2018 Oct. 11, 2019 EMCI Preamplifier EMC001340 980201 Oct. 12, 2018 Oct. 11, 2019 EMCI RF Coaxial Cable EMC104-SM-SM-8 140811+170717 Oct. 12, 2018 Oct. 11, 2019 HUBER+SUHNNER 000&3000 Power Meter ML2495A 1012010 Sep. 05, 2018 Sep. 04, 2019 Anritsu Power Sensor MA2411B 1315050 Sep. 04, 2018 Sep. 03, 2019 Anritsu RF Coaxial Cable EMC104-SM-SM- SUCOFLEX 104 Oct. 12, 2018 Oct. 11, 2019 HUBER+SUHNNER 1000(140807) RF Coaxial Cable 8D-FB Cable-Ch10-01 Oct. 12, 2018 Oct. 11, 2019 WOKEN Software E3 NA NA NA BV ADT 6.120103 Antenna Tower MFA-440H NA NA NA MF Turn Table MFT-201SS NA NA NA MF Antenna Tower &Turn Table Controller MF-7802 NA NA NA MF Note: 1. The calibration interval of the above test instruments is 12 months and the calibrations are traceable to NML/ROC and NIST/USA. 2. The test was performed in HwaYa Chamber 10. 3. The horn antenna and preamplifier (model: EMC 184045) are used only for the measurement of emission frequency above 1 GHz if tested. 4. The IC Site Registration No. is 7450F-10. Report No.: RF190319C14 Page No. 13 / 34 Report Format Version: 6.1.1

4.1.3 Test Procedures For Radiated Emission below 30 MHz a. The EUT was placed on the top of a rotating table 0.8 meters above the ground at a 3 meter chamber room. The table was rotated 360 degrees to determine the position of the highest radiation. b. The EUT was set 3 meters away from the interference-receiving antenna, which was mounted on the top of a variable-height antenna tower. c. Parallel, perpendicular, and ground-parallel orientations of the antenna are set to make the measurement. d. For each suspected emission, the EUT was arranged to its worst case and the rotatable table was turned from 0 degrees to 360 degrees to find the maximum reading. e. The test-receiver system was set to Quasi-Peak Detect Function and Specified Bandwidth with Maximum Hold Mode. Note: 1. The resolution bandwidth and video bandwidth of test receiver/spectrum analyzer is 9 kHz at frequency below 30 MHz. For Radiated Emission above 30 MHz a. The EUT was placed on the top of a rotating table 0.8 meters (for 30 MHz ~ 1 GHz) / 1.5 meters (for above 1 GHz) above the ground at 3 meter chamber room for test. The table was rotated 360 degrees to determine the position of the highest radiation. b. The EUT was set 3 meters away from the interference-receiving antenna, which was mounted on the top of a variable-height antenna tower. c. The height of antenna is varied from one meter to four meters above the ground to determine the maximum value of the field strength. Both horizontal and vertical polarizations of the antenna are set to make the measurement. d. For each suspected emission, the EUT was arranged to its worst case and then the antenna was tuned to heights from 1 meter to 4 meters and the rotatable table was turned from 0 degrees to 360 degrees to find the maximum reading. e. The test-receiver system was set to quasi-peak detect function and specified bandwidth with maximum hold mode when the test frequency is below 1 GHz. f. The test-receiver system was set to peak and average detected function and specified bandwidth with maximum hold mode when the test frequency is above 1 GHz. If the peak reading value also meets average limit, measurement with the average detector is unnecessary. Note: 1. The resolution bandwidth and video bandwidth of test receiver/spectrum analyzer is 120 kHz for Quasi-peak detection (QP) or Peak detection (PK) at frequency below 1 GHz. 2. The resolution bandwidth of test receiver/spectrum analyzer is 1 MHz and the video bandwidth is 3 MHz for Peak detection (PK) at frequency above 1 GHz. 3. The resolution bandwidth of test receiver/spectrum analyzer is 1 MHz and the video bandwidth is ≥ 1/T (Duty cycle < 98 %) or 10 Hz (Duty cycle ≥ 98 %) for Average detection (AV) at frequency above 1 GHz. (RBW = 1 MHz, VBW = 3 kHz) 4. All modes of operation were investigated and the worst-case emissions are reported. 4.1.4 Deviation from Test Standard No deviation. Report No.: RF190319C14 Page No. 14 / 34 Report Format Version: 6.1.1

4.1.5 Test Set Up <Radiated Emission below 30 MHz> 1m EUT& 3m Support Units Turn Table 80 cm Ground Plane Test Receiver <Radiated Emission 30 MHz to 1 GHz> Ant. Tower 1-4m Variable 3m 10m EUT& Support Units Turn Table 80cm Ground Plane Test Receiver Report No.: RF190319C14 Page No. 15 / 34 Report Format Version: 6.1.1

<Radiated Emission above 1 GHz> Ant. Tower 1-4 m Variable EUT& 3m Support Units Turn Table Absorber 150 cm Ground Plane Test Receiver For the actual test configuration, please refer to the attached file (Test Setup Photo). 4.1.6 EUT Operating Conditions a. Placed the EUT on the testing table. b. Set the EUT under transmission condition continuously at specific channel frequency. Report No.: RF190319C14 Page No. 16 / 34 Report Format Version: 6.1.1

ommert 4.1.7 Test Results Above 1 GHz Data: EUT Test Condition Measurement Detail Channel Channel 0 Frequency Range 1 GHz ~ 25 GHz Peak (PK) Input Power 3.0 Vde Detector Function Average (AV) Environmental ho 25 deg. C, 65 % RH Tested B Tim Chen Conditions 9 ° Y Antenna Polarity & Test Distance: Horizontal at 3 m Emissi Frequency T:Zrn Read Level Factor Limit Margin (dB) Antenna Table Angle Remark (MHz) (dBuV) (dB/m) (dBuV/im) 9 Height (cm) (Degree) (dBuV/im) 2390 43.4 48.4 —5 54 —10.6 120 65 Average 2390 53.44 58.44 —5 74 —20.56 120 65 Peak 2402 104.95 109.95 —5 120 65 Average 2402 106.22 111.22 —5 120 65 Peak 4804 42.74 57.21 —14.47 54 —11.26 120 40 Average 4804 46.88 61.35 14.47 74 2712 120 40 Peak Antenna Polarity & Test Distance: Vertical at 3 m Frequenc Emission Read Level Factor Limit Antenna Table Angle (I?IIHZ) * Level (dBuV) (dB/m) (dBuV/im) Margin (0B) (csony (em) (De reeg) Remark (dBuVim) 9 9 2390 43.36 48.36 —5 54 —10.64 333 8 Average 2390 52.47 57.47 —5 74 —21.53 333 8 Peak 2402 102.38 107.38 —5 333 8 Average 2402 103.44 108.44 —5 333 8 Peak 4804 42.92 57.39 —14.47 54 —11.08 162 353 Average 4804 47.16 61.63 —14.47 74 —26.84 162 353 Peak Remarks: 1. Emission Level = Read Level + Factor Margin value = Emission level — Limit value 2. 2402 MHz: Fundamental frequency. 3. The emission levels of other frequencies were very low against the limit. Report No.: RF190319C14 Page No. 17 / 34 Report Format Version: 6.1.1

ommert EUT Test Condition Measurement Detail Channel Channel 1 9 Frequency Range 1 GHz ~ 25 GHz Peak (PK) Input Power 3.0 Vde Detector Function Average (AV) Environmental Conditions 25 deg. C, 65 % RH Tested By Tim Chen Antenna Polarity & Test Distance: Horizontal at 3 m Frequency ET:Z:)" Read Level Factor Limit Margin (dB) Antenna Table Angle Remark (MHz) (dBuV) (dB/m) (dBuV/im) Height (cm) (Degree) (dBuV/im) 2380 41.98 46.87 —4.89 54 12.02 120 30 Average 2380 51.52 56.41 —4.89 74 —22.48 120 30 Peak 2440 104.08 109.06 —4.98 120 30 Average 2440 105.21 110.19 —4.98 120 30 Peak 2487.92 45.16 50.01 —4.85 54 —8.84 120 30 Average 2487.92 51.88 56.73 —4.85 74 —22.12 120 30 Peak 4880 43.15 57.23 —14.08 54 —10.85 120 62 Average 4880 47.88 61.96 —14.08 74 —26.12 120 62 Peak Antenna Polarity & Test Distance: Vertical at 3 m Frequency Emission Read Level Factor Limit . Antenna Table Angle (MHz) Level (dBuV) (dB/m) (dBuV/im) Margin (dB) Height (cm) (Degree) Remark (dBuV/im) 2379.86 40.15 45.04 —4.89 54 —13.85 331 360 Average 2379.86 49.86 54.75 —4.89 74 —24.14 331 360 Peak 2440 102.57 107.55 —4.98 331 360 Average 2440 103.69 108.67 —4.98 331 360 Peak 2487.92 42.94 47.79 —4.85 54 —11.06 331 360 Average 2487.92 49.17 54.02 —4.85 74 —24.83 331 360 Peak 4880 42.82 56.9 —14.08 54 +11.18 161 351 Average 4880 47.79 61.87 —14.08 74 —26.21 161 351 Peak Remarks: 1. Emission Level = Read Level + Factor Margin value = Emission level — Limit value 2. 2440 MHz: Fundamental frequency. 3. The emission levels of other frequencies were very low against the limit. Report No.: RF190319C14 Page No. 18 / 34 Report Format Version: 6.1.1

ommert EUT Test Condition Measurement Detail Channel Channel 39 Frequency Range 1 GHz ~ 25 GHz Peak (PK) Input Power 3.0 Vde Detector Function Average (AV) Environmental hs 25 deg. C, 65 % RH Tested B Tim Chen Conditions 9 ° Y Antenna Polarity & Test Distance: Horizontal at 3 m Emissi Frequency T:Zrn Read Level Factor Limit Margin (dB) Antenna Table Angle Remark (MHz) (dBuV) (dB/m) (dBuV/im) 9 Height (cm) (Degree) (dBuV/im) 2480 104.07 108.92 —4.85 120 26 Average 2480 105.16 110.01 —4.85 120 26 Peak 2483.52 52.84 57.69 —4.85 54 —1.16 120 26 Average 2483.52 71.66 76.51 —4.85 74 —2.34 120 26 Peak 4960 43.84 57.73 —13.89 54 —10.16 120 58 Average 4960 49.36 63.25 —13.89 74 —24.64 120 58 Peak Antenna Polarity & Test Distance: Vertical at 3 m Frequenc Emission Read Level Factor Limit Antenna Table Angle (I?IIHZ) * Level (dBuV) (dB/m) (dBuV/im) Margin (0B) (csony 9 (em) (De g reeg) Remark (dBuV/im) 2480 101.89 106.74 —4.85 314 360 Average 2480 102.73 107.58 —4.85 314 360 Peak 2483.52 52.07 56.92 —4.85 54 —1.93 314 360 Average 2483.52 70.55 75.4 —4.85 74 —3.45 314 360 Peak 4960 42.92 56.81 —13.89 54 —11.08 164 352 Average 4960 48.06 61.95 —13.89 74 —25.94 164 352 Peak Remarks: 1. Emission Level = Read Level + Factor Margin value = Emission level — Limit value 2480 MHz: Fundamental frequency. The emission levels of other frequencies were very low against the limit. Report No.: RF190319C14 Page No. 19 / 34 Report Format Version: 6.1.1

9 kHz ~ 30 MHz Data: The amplitude of spurious emissions attenuated more than 20 dB below the permissible value is not required to be report. 30 MHz ~ 1 GHz Worst-Case Data: EUT Test Condition Measurement Detail Channel Channel 39 Frequency Range 30 MHz ~ 1 GHz Peak (PK) Input Power 3.0 Vdc Detector Function Quasi-peak (QP) Environmental 25 deg. C, 65 % RH Tested By Tim Chen Conditions Horizontal Vertical Report No.: RF190319C14 Page No. 20 / 34 Report Format Version: 6.1.1

ommert Antenna Polarity & Test Distance: Horizontal at 3 m Frequency ET:Z:)" Read Level Factor Limit Margin (dB) Antenna Table Angle Remark (MHz) (dBuV) (dB/m) (dBuV/im) Height (cm) (Degree) (dBuV/im) 43.58 30.59 47.54 —16.95 40 —9.41 133 104 Peak 156.1 15.89 32.88 —16.99 43.5 —27.61 114 67 Peak 375.92 19.88 34.84 —14.96 46 —26.12 231 154 Peak 619.76 26.05 34.43 —8.38 46 —19.95 125 114 Peak 781.75 28.7 33.27 4.57 46 17.3 103 91 Peak 940.83 31.03 33.79 —2.76 46 —14.97 118 269 Peak Antenna Polarity & Test Distance: Vertical at 3 m Frequency ET:Z:)" Read Level Factor Limit Margin (dB) Antenna Table Angle Remark (MHz) (dBuV) (dB/m) (dBuV/im) Height (cm) (Degree) (dBuV/im) 43.58 31.55 48.5 —16.95 40 —8.45 231 154 Peak 165.8 16.12 33.31 ~17.19 43.5 —27.38 241 216 Peak 467.47 22.98 35.24 —12.26 46 —23.02 189 306 Peak 746.83 30.21 35.48 —5.27 46 —15.79 282 156 Peak 847.71 29.45 33.63 —4.18 46 —16.55 154 28 Peak 958.29 30.81 33.9 —3.09 46 1519 141 174 Peak Remarks: 1. Emission Level = Read Level + Factor Margin value = Emission level — Limit value 2. The emission levels of other frequencies were very low against the limit. Report No.: RF190319C14 Page No. 21 / 34 Report Format Version: 6.1.1

4.2 6 dB Bandwidth Measurement 4.2.1 Limits of 6 dB Bandwidth Measurement The minimum of 6 dB Bandwidth Measurement is 0.5 MHz. 4.2.2 Test Setup EUT Spectrum Analyzer Attenuator 4.2.3 Test Instruments Refer to section 4.1.2 to get information of above instrument. 4.2.4 Test Procedure a. Set resolution bandwidth (RBW) = 100 kHz b. Set the video bandwidth (VBW) ≥ 3 x RBW, Detector = Peak. c. Trace mode = max hold. d. Sweep = auto couple. e. Measure the maximum width of the emission that is constrained by the frequencies associated with the two amplitude points (upper and lower) that are attenuated by 6 dB relative to the maximum level measured in the fundamental emission 4.2.5 Deviation from Test Standard No deviation. 4.2.6 EUT Operating Conditions The software provided by client to enable the EUT under transmission condition continuously at lowest, middle and highest channel frequencies individually. Report No.: RF190319C14 Page No. 22 / 34 Report Format Version: 6.1.1

4.2.7 Test Results 6 dB Bandwidth Minimum Limit Channel Frequency (MHz) Pass / Fail (MHz) (MHz) 0 2402 0.75 0.5 Pass 19 2440 0.79 0.5 Pass 39 2480 0.80 0.5 Pass Spectrum Plot of Worst Value Report No.: RF190319C14 Page No. 23 / 34 Report Format Version: 6.1.1

4.3 Occupied Bandwidth Measurement 4.3.1 Test Setup EUT Spectrum Analyzer Attenuator 4.3.2 Test Instruments Refer to section 4.1.2 to get information of above instrument. 4.3.3 Test Procedure The transmitter output was connected to the spectrum analyzer through an attenuator. The bandwidth of the fundamental frequency was measured by spectrum analyzer with resolution bandwidth in the range of 1 % to 5 % of the anticipated emission bandwidth, and a video bandwidth at least 3x the resolution bandwidth and set the detector to PEAK. The width of a frequency band such that, below the lower and above the upper frequency limits, the mean powers emitted are each equal to a specified percentage 0.5 %of the total mean power of a given emission. 4.3.4 Deviation from Test Standard No deviation. 4.3.5 EUT Operating Conditions The software provided by client to enable the EUT under transmission condition continuously at lowest, middle and highest channel frequencies individually. Report No.: RF190319C14 Page No. 24 / 34 Report Format Version: 6.1.1

4.3.6 Test Results Occupied Bandwidth Channel Frequency (MHz) Pass / Fail (MHz) 0 2402 1.51 Pass 19 2440 1.52 Pass 39 2480 1.55 Pass Spectrum Plot of Worst Value Report No.: RF190319C14 Page No. 25 / 34 Report Format Version: 6.1.1

4.4 Conducted Output Power Measurement 4.4.1 Limits of Conducted Output Power Measurement For systems using digital modulation in the 2400–2483.5 MHz bands: 1 Watt (30 dBm) 4.4.2 Test Setup EUT Power Sensor Power Meter Attenuator 4.4.3 Test Instruments Refer to section 4.1.2 to get information of above instrument. 4.4.4 Test Procedures A peak power sensor was used on the output port of the EUT. A power meter was used to read the response of the peak power sensor. Record the power level. 4.4.5 Deviation from Test Standard No deviation. 4.4.6 EUT Operating Conditions The software provided by client to enable the EUT under transmission condition continuously at lowest, middle and highest channel frequencies individually. Report No.: RF190319C14 Page No. 26 / 34 Report Format Version: 6.1.1

4.4.7 Test Results <Peak Power> Frequency Peak Power Peak Power Limit Channel Pass / Fail (MHz) (mW) (dBm) (dBm) 0 2402 2.851 4.55 30 Pass 19 2440 2.773 4.43 30 Pass 39 2480 2.655 4.24 30 Pass <Average Power> Frequency Average Power Average Power Limit Channel Pass / Fail (MHz) (mW) (dBm) (dBm) 0 2402 2.761 4.41 30 Pass 19 2440 2.667 4.26 30 Pass 39 2480 2.564 4.09 30 Pass Report No.: RF190319C14 Page No. 27 / 34 Report Format Version: 6.1.1

4.5 Power Spectral Density Measurement 4.5.1 Limits of Power Spectral Density Measurement The Maximum of Power Spectral Density Measurement is 8 dBm. 4.5.2 Test Setup EUT Spectrum Analyzer Attenuator 4.5.3 Test Instruments Refer to section 4.1.2 to get information of above instrument. 4.5.4 Test Procedure a. Set analyzer center frequency to DTS channel center frequency. b. Set the span to 1.5 times the DTS bandwidth. c. Set the RBW to: 3 kHz ≤ RBW ≤ 100 kHz. d. Set the VBW ≥ 3 × RBW. e. Detector = peak. f. Sweep time = auto couple. g. Trace mode = max hold. h. Allow trace to fully stabilize. i. Use the peak marker function to determine the maximum amplitude level within the RBW. 4.5.5 Deviation from Test Standard No deviation. 4.5.6 EUT Operating Condition The software provided by client to enable the EUT under transmission condition continuously at lowest, middle and highest channel frequencies individually. Report No.: RF190319C14 Page No. 28 / 34 Report Format Version: 6.1.1

4.5.7 Test Results Frequency PSD Limit Channel Pass / Fail (MHz) (dBm/3 kHz) (dBm/3 kHz) 0 2402 -8.97 8 Pass 19 2440 -9.14 8 Pass 39 2480 -9.30 8 Pass Spectrum Plot of Worst Value Report No.: RF190319C14 Page No. 29 / 34 Report Format Version: 6.1.1

4.6 Conducted Out of Band Emission Measurement 4.6.1 Limits of Conducted Out of Band Emission Measurement Below –20 dB of the highest emission level of operating band (in 100 kHz Resolution Bandwidth). 4.6.2 Test Setup EUT Spectrum Analyzer Attenuator 4.6.3 Test Instruments Refer to section 4.1.2 to get information of above instrument. 4.6.4 Test Procedure MEASUREMENT PROCEDURE REF 1. Set the RBW = 100 kHz. 2. Set the VBW ≥ 300 kHz. 3. Detector = peak. 4. Sweep time = auto couple. 5. Trace mode = max hold. 6. Allow trace to fully stabilize. 7. Use the peak marker function to determine the maximum power level in any 100 kHz band segment within the fundamental EBW. MEASUREMENT PROCEDURE OOBE 1. Set RBW = 100 kHz. 2. Set VBW ≥ 300 kHz. 3. Detector = peak. 4. Sweep = auto couple. 5. Trace Mode = max hold. 6. Allow trace to fully stabilize. 7. Use the peak marker function to determine the maximum amplitude level. 4.6.5 Deviation from Test Standard No deviation. 4.6.6 EUT Operating Condition The software provided by client to enable the EUT under transmission condition continuously at lowest, middle and highest channel frequencies individually. Report No.: RF190319C14 Page No. 30 / 34 Report Format Version: 6.1.1

4.6.7 Test Results Ch 0 Ch 19 Ch 39 Report No.: RF190319C14 Page No. 31 / 34 Report Format Version: 6.1.1

Ch 0 Band Edge Ch 39 Band Edge Report No.: RF190319C14 Page No. 32 / 34 Report Format Version: 6.1.1

5 Pictures of Test Arrangements Please refer to the attached file (Test Setup Photo). Report No.: RF190319C14 Page No. 33 / 34 Report Format Version: 6.1.1

Appendix – Information of the Testing Laboratories We, Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, were founded in 1988 to provide our best service in EMC, Radio, Telecom and Safety consultation. Our laboratories are FCC recognized accredited test firms and accredited according to ISO/IEC 17025. If you have any comments, please feel free to contact us at the following: Lin Kou EMC/RF Lab Hsin Chu EMC/RF/Telecom Lab Tel: 886-2-26052180 Tel: 886-3-6668565 Fax: 886-2-26051924 Fax: 886-3-6668323 Hwa Ya EMC/RF/Safety Tel: 886-3-3183232 Fax: 886-3-3270892 Email: service.adt@tw.bureauveritas.com Web Site: www.bureauveritas-adt.com The address and road map of all our labs can be found in our web site also. --- END --- Report No.: RF190319C14 Page No. 34 / 34 Report Format Version: 6.1.1


Document Created: 2019-05-20 10:28:36
Document Modified: 2019-05-20 10:28:36
© 2025 FCC.report
This site is not affiliated with or endorsed by the FCC