Test Report

FCC ID: MG3-9700

Test Report

Download: PDF
FCCID_2921961

FCC ID: MG3-9700 Test Report #: 4190-1 IC:2575A-9700 02/20/2016 EMI TEST REPORT FCC Part 15 Subpart C (§15.247) Operation within the bands 902-928 MHz, 2400-2483.5 MHz, and 5725-5850 MHz. RSS-247 Issue 1 Digital Transmission Systems (DTSs), Frequency Hopping Systems (FHSs) and License-Exempt Local Area Network (LE-LAN) Devices Prepared For: Universal Electronics, Inc. 201 East Sandpointe Ave, 8th Floor Santa Ana, CA 92707 Product Name : BLE and Infrared remote control Model Name : 9700BC0-001-R FCC ID : MG3-9700 IC: 2575A-9700 Application Purpose : Original Prepared by: EMCE Engineering, Inc. 44366 S. Grimmer Blvd., Fremont, CA 94538 US This report only responds to the tested sample and may not be reproduced, except in full, without written approval of the EMCE Engineering, Inc. EMCE Engineering, Inc., 44366 S. Grimmer Blvd., Fremont, CA 94538 Page 1 of 31 Tel:510-490-4307 Fax: 510-490-3441 e-mail: bob@universalcompliance.com Accredited by the National Voluntary Laboratory Accreditation Program for the specific scope of Accreditation under Lab Code 200092-0

FCC ID: MG3-9700 Test Report #: 4190-1 IC:2575A-9700 02/20/2016 Revision History Rev. Issue Date Description 1 02/20/2016 Initial Issue EMCE Engineering, Inc., 44366 S. Grimmer Blvd., Fremont, CA 94538 Page 2 of 31 Tel:510-490-4307 Fax: 510-490-3441 e-mail: bob@universalcompliance.com Accredited by the National Voluntary Laboratory Accreditation Program for the specific scope of Accreditation under Lab Code 200092-0

FCC ID: MG3-9700 Test Report #: 4190-1 IC:2575A-9700 02/20/2016 TABLE OF CONTENTS 1. GENERAL INFORMATION 4 2. EUT DESCRIPTION 5 3. SUMMARY OF TEST RESULTS 6 4. MODIFICATIONS 7 5. TEST RESULTS 8 6. TEST EQUIPMENT 26 EMCE Engineering, Inc., 44366 S. Grimmer Blvd., Fremont, CA 94538 Page 3 of 31 Tel:510-490-4307 Fax: 510-490-3441 e-mail: bob@universalcompliance.com Accredited by the National Voluntary Laboratory Accreditation Program for the specific scope of Accreditation under Lab Code 200092-0

FCC ID: MG3-9700 Test Report #: 4190-1 IC:2575A-9700 02/20/2016 1.0 GENERAL INFORMATION Test Laboratory: EMCE Engineering 44366 S. Grimmer Blvd. Fremont, CA 94538 USA Tel : 510-490-4307, Fax : 510-490-3441 bob@universalcompliance.com FCC registration number : 743299 Test Site : FCC : US5291, IC : 3324A Applicant Name : Universal Electronics, Inc. 201 East Sandpointe Ave, 8th Floor Santa Ana, CA 92707 Contact Person: Jesse Mendez Application Purpose : Original EUT Description BLE and Infrared remote control - Bluetooth Low Energy Product Name BLE and Infrared remote control Model Name : 9700BC0-001-R Applied Standards : FCC 47 CFR §15.209, §15.247 IC RSS 247 Issue 1 FCC ID : MG3-9700 IC : IC:3375B-RC1 RF Operating Frequency (ies) 2402 – 2480 MHz Modulation GFSK Emission Designator 2M47F1D Receipt of EUT : 01/25/2016 Date of Testing : 01/26/2016 – 02/14/2016 Date of Report : 02/20/2016 The tests listed in this report have been completed to demonstrated compliance to the CFR 47 Section 15.247, and RSS 247 Issue 1. Contents approved: Name: Bob Cole Title: President EMCE Engineering, Inc., 44366 S. Grimmer Blvd., Fremont, CA 94538 Page 4 of 31 Tel:510-490-4307 Fax: 510-490-3441 e-mail: bob@universalcompliance.com Accredited by the National Voluntary Laboratory Accreditation Program for the specific scope of Accreditation under Lab Code 200092-0

FCC ID: MG3-9700 Test Report #: 4190-1 IC:2575A-9700 02/20/2016 2.0 EUT AND ACCESSORY INFORMATION EUT FCC ID MG3-9700 Product Name BLE and Infrared remote control Model name 9700BC0-001-R Frequency Range TX : 2402 – 2480 MHz RX : 2402 – 2480 MHz Max. RF Output Power Peak : -1.43 dBm (0.719 mW) Operating Mode Bluetooth Low Energy (BLE) Modulation Type GFSK Number of Channels 40 Channels Manufacturer Universal Electronics, Inc. Power Source Battery Antenna Specification Broadcom Lifted Strip Antenna: Gain = -1.2 dB @ 2441 MHz Support Equipment Description Model Serial Number Manufacturer Power Cable Number Description NONE Cable Description From To Length Shielded Ferrite (Meters) (Y/N) Loaded (Y/N) NONE EMCE Engineering, Inc., 44366 S. Grimmer Blvd., Fremont, CA 94538 Page 5 of 31 Tel:510-490-4307 Fax: 510-490-3441 e-mail: bob@universalcompliance.com Accredited by the National Voluntary Laboratory Accreditation Program for the specific scope of Accreditation under Lab Code 200092-0

FCC ID: MG3-9700 Test Report #: 4190-1 IC:2575A-9700 02/20/2016 3.0 SUMMARY OF TEST RESULTS The EUT has been tested according to the following specifications: Test Standard Result FCC 47 CFR Part 15 RSS 247 Issue 1, Description (Pass / Fail) RSS-Gen, Issue 4 15.205, 15.209 Radiated Spurious Emissions, 5.5 Pass 15.247 Radiated Restricted Bandedge 5.2 15.247(a)(2) 6dB Bandwidth Pass 5.4 (4) 15.247(6)(3) Conducted Maximum Peak Output Power Pass 5.2 15.247(e) Power Spectral Density Pass 5.5 Conducted Bandedge 15.247(d) Pass (Out of Band Emissions) 15.207 N/A AC Power line Conducted Emissions N/A RSS-GEN N/A 4.6.1 99% Bandwidth PASS ANSI C63.4: 2014 / FCC KDB 558074 D01 DTS Meas Guidance v03r03 dated June 09, 2015 PS: All measurement uncertainties are not taken into consideration for all presented test result. PASS The EUT passed that particular test. FAIL The EUT failed that particular test. N/A Not Applicable – No IC Application EMCE Engineering, Inc., 44366 S. Grimmer Blvd., Fremont, CA 94538 Page 6 of 31 Tel:510-490-4307 Fax: 510-490-3441 e-mail: bob@universalcompliance.com Accredited by the National Voluntary Laboratory Accreditation Program for the specific scope of Accreditation under Lab Code 200092-0

FCC ID: MG3-9700 Test Report #: 4190-1 IC:2575A-9700 02/20/2016 4.0 MODIFICATIONS There were no modifications. EMCE Engineering, Inc., 44366 S. Grimmer Blvd., Fremont, CA 94538 Page 7 of 31 Tel:510-490-4307 Fax: 510-490-3441 e-mail: bob@universalcompliance.com Accredited by the National Voluntary Laboratory Accreditation Program for the specific scope of Accreditation under Lab Code 200092-0

FCC ID: MG3-9700 Test Report #: 4190-1 IC:2575A-9700 02/20/2016 5.0 TEST RESULTS 5.1 CONDUCTED SPURIOUS EMISSIONS 15.247(d) In any 100 kHz bandwidth outside the frequency band in which the spread spectrum or digitally modulated intentional radiator is operating, the radio frequency power that is produced by the intentional radiator shall be at least 20 dB below that in the 100 kHz bandwidth within the band that contains the highest level of the desired power, based on either an RF conducted or a radiated measurement TEST RESULTS – 2402 MHz Xmit Frequency Test Location: EMCE Engineering •44366 S. Grimmer Blvd • Fremont, CA 94538 • Customer: UEI Specification: EN 300 328 30-26000 Spurious Work Order #: 4190 Date: 1/30/2016 Test Type: Conducted Emissions Time: 1:14:12 PM Equipment: Remote Control Sequence#: 4 Manufacturer: Universal Electronics, Inc. Tested By: Bob Cole Model: 9700BC0-001-R Battery S/N: N/A Test Equipment: Function S/N Calibration Date Cal Due Date Asset # FSV40-B160 Signal 101468 03/28/2015 03/28/2017 755 Analyzer EMITest v4.01 Build 195 05/01/2014 05/01/2017 610 Measurement Software Equipment Under Test (* = EUT): Function Manufacturer Model # S/N Remote Control* Universal Electronics, Inc. 9700BC0-001-R N/A Support Devices: Function Manufacturer Model # S/N Test Conditions / Notes: Arris remote Transducer Legend: T1=dBuV - dBm conversion Ext Attn: 0 dB Measurement Data: Reading listed by margin. Test Lead: Antenna # Freq Rdng T1 Dist Corr Spec Margin Polar MHz dBµV dB dB dB dB Table dBm dBm dB Ant 1 2402.011M 105.8 -107.0 +0.0 -1.2 0.0 -1.2 Anten EMCE Engineering, Inc., 44366 S. Grimmer Blvd., Fremont, CA 94538 Page 8 of 31 Tel:510-490-4307 Fax: 510-490-3441 e-mail: bob@universalcompliance.com Accredited by the National Voluntary Laboratory Accreditation Program for the specific scope of Accreditation under Lab Code 200092-0

FCC ID: MG3-9700 Test Report #: 4190-1 IC:2575A-9700 02/20/2016 EMCE Engineering, Inc., 44366 S. Grimmer Blvd., Fremont, CA 94538 Page 9 of 31 Tel:510-490-4307 Fax: 510-490-3441 e-mail: bob@universalcompliance.com Accredited by the National Voluntary Laboratory Accreditation Program for the specific scope of Accreditation under Lab Code 200092-0

FCC ID: MG3-9700 Test Report #: 4190-1 IC:2575A-9700 02/20/2016 TEST RESULTS – 2442 MHz Xmit Frequency Test Location: EMCE Engineering •44366 S. Grimmer Blvd • Fremont, CA 94538 • Customer: UEI Specification: EN 300 328 30-26000 Spurious Work Order #: 4190 Date: 1/30/2016 Test Type: Conducted Emissions Time: 3:44:08 PM Equipment: Remote Control Sequence#: 3 Manufacturer: Universal Electronics, Inc. Tested By: Bob Cole Model: 9700BC0-001-R Battery S/N: N/A Test Equipment: Function S/N Calibration Date Cal Due Date Asset # FSV40-B160 Signal 101468 03/28/2015 03/28/2017 755 Analyzer EMITest v4.01 Build 195 05/01/2014 05/01/2017 610 Measurement Software Equipment Under Test (* = EUT): Function Manufacturer Model # S/N Remote Control* Universal Electronics, Inc. 9700BC0-001-R N/A Support Devices: Function Manufacturer Model # S/N Test Conditions / Notes: Transducer Legend: T1=dBuV - dBm conversion Ext Attn: 0 dB Measurement Data: Reading listed by margin. Test Lead: Antenna # Freq Rdng T1 Dist Corr Spec Margin Polar MHz dBµV dB dB dB dB Table dBm dBm dB Ant 1 2441.209M 104.1 -107.0 +0.0 -2.9 0.0 -2.9 Anten 2 2501.148M 49.9 -107.0 +0.0 -57.1 -29.4 -27.7 Anten 3 2347.337M 41.6 -107.0 +0.0 -65.4 -30.0 -35.4 Anten EMCE Engineering, Inc., 44366 S. Grimmer Blvd., Fremont, CA 94538 Page 10 of 31 Tel:510-490-4307 Fax: 510-490-3441 e-mail: bob@universalcompliance.com Accredited by the National Voluntary Laboratory Accreditation Program for the specific scope of Accreditation under Lab Code 200092-0

FCC ID: MG3-9700 Test Report #: 4190-1 IC:2575A-9700 02/20/2016 EMCE Engineering, Inc., 44366 S. Grimmer Blvd., Fremont, CA 94538 Page 11 of 31 Tel:510-490-4307 Fax: 510-490-3441 e-mail: bob@universalcompliance.com Accredited by the National Voluntary Laboratory Accreditation Program for the specific scope of Accreditation under Lab Code 200092-0

FCC ID: MG3-9700 Test Report #: 4190-1 IC:2575A-9700 02/20/2016 TEST RESULTS – 2480 MHz Xmit Frequency Test Location: EMCE Engineering •44366 S. Grimmer Blvd • Fremont, CA 94538 • Customer: UEI Specification: EN 300 328 30-26000 Spurious Work Order #: 4190 Date: 1/30/2016 Test Type: Conducted Emissions Time: 6:02:35 PM Equipment: Remote Control Sequence#: 2 Manufacturer: Universal Electronics, Inc. Tested By: Bob Cole Model: 9700BC0-001-R Battery S/N: N/A Test Equipment: Function S/N Calibration Date Cal Due Date Asset # FSV40-B160 Signal 101468 03/28/2015 03/28/2017 755 Analyzer EMITest v4.01 Build 195 05/01/2014 05/01/2017 610 Measurement Software Equipment Under Test (* = EUT): Function Manufacturer Model # S/N Remote Control* Universal Electronics, Inc. 9700BC0-001-R N/A Support Devices: Function Manufacturer Model # S/N Test Conditions / Notes: Arris BLE Remote Transducer Legend: T1=dBuV - dBm conversion Ext Attn: 0 dB Measurement Data: Reading listed by margin. Test Lead: Antenna # Freq Rdng T1 Dist Corr Spec Margin Polar MHz dBµV dB dB dB dB Table dBm dBm dB Ant 1 2480.151M 102.3 -107.0 +0.0 -4.7 0.0 -4.7 Anten 2 4980.301M 38.2 -107.0 +0.0 -68.8 -30.0 -38.8 Anten EMCE Engineering, Inc., 44366 S. Grimmer Blvd., Fremont, CA 94538 Page 12 of 31 Tel:510-490-4307 Fax: 510-490-3441 e-mail: bob@universalcompliance.com Accredited by the National Voluntary Laboratory Accreditation Program for the specific scope of Accreditation under Lab Code 200092-0

FCC ID: MG3-9700 Test Report #: 4190-1 IC:2575A-9700 02/20/2016 EMCE Engineering, Inc., 44366 S. Grimmer Blvd., Fremont, CA 94538 Page 13 of 31 Tel:510-490-4307 Fax: 510-490-3441 e-mail: bob@universalcompliance.com Accredited by the National Voluntary Laboratory Accreditation Program for the specific scope of Accreditation under Lab Code 200092-0

FCC ID: MG3-9700 Test Report #: 4190-1 IC:2575A-9700 02/20/2016 5.2 6 dB BANDWIDTH LIMIT §15.247(2) Systems using digital modulation techniques may operate in the 902-928 MHz, 2400-2483.5 MHz, and 5725-5850 MHz bands. The minimum 6 dB bandwidth shall be at least 500 kHz. TEST PROCEDURE  The transmitter output is connected to the spectrum analyzer  The RBW is set to 100KHz. The VBW is set to 100KHz. The sweep time is coupled.  Signal Peak is detected  Bandwidth is determined at the points 6 dB down from the peak value of the modulated carrier. RESULTS NO non-compliance noted. Operating Frequency (MHz) 6dB Bandwidth (KHz) Limit (KHz) Result 2402 674 >500 PASS 2442 680 >500 PASS 2480 680 >500 PASS EMCE Engineering, Inc., 44366 S. Grimmer Blvd., Fremont, CA 94538 Page 14 of 31 Tel:510-490-4307 Fax: 510-490-3441 e-mail: bob@universalcompliance.com Accredited by the National Voluntary Laboratory Accreditation Program for the specific scope of Accreditation under Lab Code 200092-0

FCC ID: MG3-9700 Test Report #: 4190-1 IC:2575A-9700 02/20/2016 2402 MHz Date:22.DEC.2015 00:24:52 2442 MHz Date:22.FEB.2016 23:48:37 EMCE Engineering, Inc., 44366 S. Grimmer Blvd., Fremont, CA 94538 Page 15 of 31 Tel:510-490-4307 Fax: 510-490-3441 e-mail: bob@universalcompliance.com Accredited by the National Voluntary Laboratory Accreditation Program for the specific scope of Accreditation under Lab Code 200092-0

FCC ID: MG3-9700 Test Report #: 4190-1 IC:2575A-9700 02/20/2016 2480 MHz Date:22.DEC.2015 00:26:46 EMCE Engineering, Inc., 44366 S. Grimmer Blvd., Fremont, CA 94538 Page 16 of 31 Tel:510-490-4307 Fax: 510-490-3441 e-mail: bob@universalcompliance.com Accredited by the National Voluntary Laboratory Accreditation Program for the specific scope of Accreditation under Lab Code 200092-0

FCC ID: MG3-9700 Test Report #: 4190-1 IC:2575A-9700 02/20/2016 5.3 CONDUCTED MAXIMUM PEAK OUTPUT POWER LIMIT §15.247(d) 1 Watt / 30dBm / 137 dBuV (50 Ohms conversion) TEST PROCEDURE The transmitter output to the antenna is connected to a spectrum analyzer. The RBW / VBW is set to 1. The sweep time is coupled and the span is set to 5 MHz. Peak Output Power Frequency Peak Output Limit (dBm) Results (MHz) Power(dBm) 2402 -1.43 20 PASS 2442 -2.06 20 PASS 2480 -1.60 20 PASS 2402 MHz Date:29.JAN .2016 01:39:05 EMCE Engineering, Inc., 44366 S. Grimmer Blvd., Fremont, CA 94538 Page 17 of 31 Tel:510-490-4307 Fax: 510-490-3441 e-mail: bob@universalcompliance.com Accredited by the National Voluntary Laboratory Accreditation Program for the specific scope of Accreditation under Lab Code 200092-0

FCC ID: MG3-9700 Test Report #: 4190-1 IC:2575A-9700 02/20/2016 2442 MHz Date:29.JA N.2016 02:54:08 2480 MHz Date:29.JAN.2016 02:26:42 EMCE Engineering, Inc., 44366 S. Grimmer Blvd., Fremont, CA 94538 Page 18 of 31 Tel:510-490-4307 Fax: 510-490-3441 e-mail: bob@universalcompliance.com Accredited by the National Voluntary Laboratory Accreditation Program for the specific scope of Accreditation under Lab Code 200092-0

FCC ID: MG3-9700 Test Report #: 4190-1 IC:2575A-9700 02/20/2016 5.4 POWER SPECTRAL DENSITY LIMIT §15.247 (e) 8 dBm TEST PROCEDURE The transmitter antenna output is connected to a spectrum analyzer. The RBW is set to 3 KHz and the VBW is set to 10 KHz . RESULTS NO non-compliance noted. Frequency PSD Limit Result (MHz) (dBm) (dBm) 2402 -12.38 8.0 PASS 2442 -13.04 8.0 PASS 2480 -12.62 8.0 PASS 2402 MHz Date:29.JAN.2016 01:43:19 EMCE Engineering, Inc., 44366 S. Grimmer Blvd., Fremont, CA 94538 Page 19 of 31 Tel:510-490-4307 Fax: 510-490-3441 e-mail: bob@universalcompliance.com Accredited by the National Voluntary Laboratory Accreditation Program for the specific scope of Accreditation under Lab Code 200092-0

FCC ID: MG3-9700 Test Report #: 4190-1 IC:2575A-9700 02/20/2016 2442 MHz Date:29.JAN.2016 02:58:23 2480 MHz Date:29.JAN.2016 02:33:36 EMCE Engineering, Inc., 44366 S. Grimmer Blvd., Fremont, CA 94538 Page 20 of 31 Tel:510-490-4307 Fax: 510-490-3441 e-mail: bob@universalcompliance.com Accredited by the National Voluntary Laboratory Accreditation Program for the specific scope of Accreditation under Lab Code 200092-0

FCC ID: MG3-9700 Test Report #: 4190-1 IC:2575A-9700 02/20/2016 5.5 CONDUCTED BANDEDGE Conducted Bandedge LIMIT 15.247(d) In any 100 kHz bandwidth outside the frequency band in which the spread spectrum or digitally modulated intentional radiator is operating, the radio frequency power that is produced by the intentional radiator shall be at least 20 dB below that in the 100 kHz bandwidth within the band that contains the highest level of the desired power TEST PROCEDURE Transmitter antenna output connected to spectrum analyzer. Analyzer span is set to show Peak in band, as well as out of band peaks. 2400 MHz Bandedge Date:29.JAN.2016 02:03:46 EMCE Engineering, Inc., 44366 S. Grimmer Blvd., Fremont, CA 94538 Page 21 of 31 Tel:510-490-4307 Fax: 510-490-3441 e-mail: bob@universalcompliance.com Accredited by the National Voluntary Laboratory Accreditation Program for the specific scope of Accreditation under Lab Code 200092-0

FCC ID: MG3-9700 Test Report #: 4190-1 IC:2575A-9700 02/20/2016 2483.5 MHz Bandedge Date:29.JAN.2016 02:24:18 EMCE Engineering, Inc., 44366 S. Grimmer Blvd., Fremont, CA 94538 Page 22 of 31 Tel:510-490-4307 Fax: 510-490-3441 e-mail: bob@universalcompliance.com Accredited by the National Voluntary Laboratory Accreditation Program for the specific scope of Accreditation under Lab Code 200092-0

FCC ID: MG3-9700 Test Report #: 4190-1 IC:2575A-9700 02/20/2016 5.6 RADIATED SPURIOUS EMISSIONS – BANDEDGE 15.247 (d) In any 100 kHz bandwidth outside the frequency band in which the spread spectrum or digitally modulated intentional radiator is operating, the radio frequency power that is produced by the intentional radiator shall be at least 20 dB below that in the 100 kHz bandwidth within the band that contains the highest level of the desired power, based on either an RF conducted or a radiated measurement, provided the transmitter demonstrates compliance with the peak conducted power limits. If the transmitter complies with the conducted power limits based on the use of RMS averaging over a time interval, as permitted under paragraph (b)(3) of this section, the attenuation required under this paragraph shall be 30 dB instead of 20 dB. Attenuation below the general limits specified in §15.209(a) is not required. In addition, radiated emissions which fall in the restricted bands, as defined in §15.205(a), must also comply with the radiated emission limits specified in §15.209(a) (see §15.205(c)). MHz MHz MHz GHz 0.090-0.110 16.42-16.423 399.9-410 4.5-5.15 1 0.495-0.505 16.69475-16.69525 608-614 5.35-5.46 2.1735-2.1905 16.80425-16.80475 960-1240 7.25-7.75 4.125-4.128 25.5-25.67 1300-1427 8.025-8.5 4.17725-4.17775 37.5-38.25 1435-1626.5 9.0-9.2 4.20725-4.20775 73-74.6 1645.5-1646.5 9.3-9.5 6.215-6.218 74.8-75.2 1660-1710 10.6-12.7 6.26775-6.26825 108-121.94 1718.8-1722.2 13.25-13.4 6.31175-6.31225 123-138 2200-2300 14.47-14.5 8.291-8.294 149.9-150.05 2310-2390 15.35-16.2 8.362-8.366 156.52475-156.52525 2483.5-2500 17.7-21.4 8.37625-8.38675 156.7-156.9 2690-2900 22.01-23.12 8.41425-8.41475 162.0125-167.17 3260-3267 23.6-24.0 12.29-12.293 167.72-173.2 3332-3339 31.2-31.8 12.51975-12.52025 240-285 3345.8-3358 36.43-36.5 12.57675-12.57725 322-335.4 3600-4400 ( 2) 13.36-13.41 RESULTS Bandedge Frequency(MHz) Measured(dBc) Limit (dBc) Result 2402 52.16 >20 PASS 2480 50.87 >20 PASS EMCE Engineering, Inc., 44366 S. Grimmer Blvd., Fremont, CA 94538 Page 23 of 31 Tel:510-490-4307 Fax: 510-490-3441 e-mail: bob@universalcompliance.com Accredited by the National Voluntary Laboratory Accreditation Program for the specific scope of Accreditation under Lab Code 200092-0

FCC ID: MG3-9700 Test Report #: 4190-1 IC:2575A-9700 02/20/2016 5.7 TRANSMITTER RADIATED SPURIOUS EMISSIONS LIMITS §15.247 (d) In any 100 kHz bandwidth outside the frequency band in which the spread spectrum or digitally modulated intentional radiator is operating, the radio frequency power that is produced by the intentional radiator shall be at least 20 dB below that in the 100 kHz bandwidth within the band that contains the highest level of the desired power, based on either an RF conducted or a radiated measurement, provided the transmitter demonstrates compliance with the peak conducted power limits. If the transmitter complies with the conducted power limits based on the use of RMS averaging over a time interval, as permitted under paragraph (b)(3) of this section, the attenuation required under this paragraph shall be 30 dB instead of 20 dB. Attenuation below the general limits specified in §15.209(a) is not required. In addition, radiated emissions which fall in the restricted bands, as defined in §15.205(a), must also comply with the radiated emission limits specified in §15.209(a) (see §15.205(c)). §15.205 (b) Except as provided in paragraphs (d) and (e), the field strength of emissions appearing within these frequency bands shall not exceed the limits shown in Section 15.209. At frequencies equal to or less than 1000 MHz, compliance with the limits in Section 15.209 shall be demonstrated using measurement instrumentation employing a CISPR quasi-peak detector. Above 1000MHz, compliance with the emission limits in Section 15.209 shall be demonstrated based on the average value of the measured emissions. The provisions in Section 15.35 apply to these measurements. (a) Except as shown in paragraph (d) of this section, only spurious emissions are permitted in any of the frequency bands listed below: §15.209 (a) Except as provided elsewhere in this Subpart, the emissions from an intentional radiator shall not exceed the field strength levels specified in the following table ; Frequency (MHz) Field Strength (uV/m) Field Strength (dBuV/m) 30-88 100 40.0 88-216 150 43.5 216-960 200 46.0 Above 960 500 54.0 ** Except as provided in paragraph (g), fundamental emissions from intentional radiators operating under this Section shall not be located in the frequency bands 54-72 MHz, 76-88 MHz, 174-216 MHz or 470-806 MHz However, operation within these frequency bands is permitted under other sections of this part, e.g., Sections 15.231 and 15.241 EMCE Engineering, Inc., 44366 S. Grimmer Blvd., Fremont, CA 94538 Page 24 of 31 Tel:510-490-4307 Fax: 510-490-3441 e-mail: bob@universalcompliance.com Accredited by the National Voluntary Laboratory Accreditation Program for the specific scope of Accreditation under Lab Code 200092-0

FCC ID: MG3-9700 M Test Reportt #: 4190-1 IC:2575A A-9700 0 02/20/2016 TEST CON NFIGURAT TION [30 MHz - 1 GHz] [ Above 1 GHz] G EMCE Engine eering, Inc., 44366 4 S. Grim mmer Blvd., Fremont, CA 9 94538 Page 25 of 3 31 el:510-490-43 Te 307 Fax: 510--490-3441 e-mail: bob@un niversalcomppliance.com A Accredited by the t National Voluntary V Lab boratory Accre editation Prog gram for the sspecific scope e of A Accreditation under u Lab Code 200092-0

FCC ID: MG3-9700 Test Report #: 4190-1 IC:2575A-9700 02/20/2016 TEST PROCEDURE The EUT is placed on a non-conducting table 80 cm above the ground plane. The antenna to EUT distance is 3 meters. The EUT is configured in accordance with ANSI C63.4 The EUT is set to transmit in a continuous mode. For measurements below 1 GHz the resolution bandwidth is set to 100 KHz for peak detection measurements or 120 KHz or quasi-peak detection measurements. Peak detection is used unless otherwise noted as quasi-peak. For measurements above 1 GHz the resolution bandwidth is set to 1 MHz, then the video bandwidth is set to 1 MHz for peak measurements and VBW of 10 Hz for average measurements. The frequency range of interest is monitored at a fixed antenna height and EUT azimuth. The EUT is rotated through 360 degrees to maximize emissions received. The antenna is scanned from 1 to 4 meters above the ground plane to further maximize the emission. Measurements are made with the antenna polarized in both the vertical and the horizontal positions. RESULTS: NO non-compliance noted. Note 1. The antenna is manipulated through typical positions, polarity and length during the testing 2. The frequency range was scanned from 30 MHz to 1 GHz and the worst-case emissions are reported. 3. There is detected level above reference noise floor spectrum analyzer. FIELD STRENGTH CALCULATION The field strength is calculated by adding the Antenna Factor and Cable Factor. The basic equation with a sample calculation is as follows: FS = RA + AF + CF where FS = Field Strength RA = Receiver Amplitude AF = Antenna Factor CF = Cable Attenuation Factor Assume a receiver reading of 21.5 dBuV is obtained. The Antenna Factor of 7.4 dB/m and a Cable Factor of 1.1 dB is added. The 30 dBuV/m value is mathematically converted to its corresponding level in uV/m. FS = 21.5 + 7.4 + 1.1 = 30 dBuV/m EMCE Engineering, Inc., 44366 S. Grimmer Blvd., Fremont, CA 94538 Page 26 of 31 Tel:510-490-4307 Fax: 510-490-3441 e-mail: bob@universalcompliance.com Accredited by the National Voluntary Laboratory Accreditation Program for the specific scope of Accreditation under Lab Code 200092-0

FCC ID: MG3-9700 Test Report #: 4190-1 IC:2575A-9700 02/20/2016 MEASUREMENT UNCERTAINTY Measurement Uncertainty Budget Radiated Emissions @ 10 Meters Per CISRP 16-4-2 Input Quantity Uncertainty of xi U(x) Ci Ci u (xi) dB Probability dB dB Distribution Function Receiver +/- 0.1 K=1 0.1 1 0.1 Reading Attenuation, +/- 0.1 K=2 0.05 1 0.05 Antenna - receiver Antenna +/- 2.0 K=2 1.0 1 1.0 Factor Receiver Corrections Sine Wave +/- 1.0 K=1 0.5 1 0.5 Voltage Pulse +/- 1.5 Rectangular 0.87 1 0.87 Amplitude Response Pulse Rep +/- 1.5 Rectangular 0.87 1 0.87 Rate Response Noise Floor +/- 0.5 K=2 0.25 1 0.25 Proximity Mismatch +/- 0.9 U shaped 0.67 1 0.67 Antenna – Receiver Antenna Corrections AF Freq +/- 0.3 Rectangular 0.17 1 0.17 Interpolation AF Height +/- 0.5 Rectangular 0.29 1 0.29 Deviations Balance +/- 0.3 Rectangular 0.17 1 0.17 Site Corrections Site +/- 3.0 Rectangular 1.22 1 0.82 Imperfections Separation +/- 0.1 Rectangular 0.06 1 0.06 distance Table Height +/- 0.1 K=2 0.05 1 0.05 Total Measurement Uncertainty - Radiated Emissions @ 10 Meters 4.89 2Uc(E) = 4.89 Test Location: EMCE Engineering •44366 S. Grimmer Blvd • Fremont, CA 94538 • EMCE Engineering, Inc., 44366 S. Grimmer Blvd., Fremont, CA 94538 Page 27 of 31 Tel:510-490-4307 Fax: 510-490-3441 e-mail: bob@universalcompliance.com Accredited by the National Voluntary Laboratory Accreditation Program for the specific scope of Accreditation under Lab Code 200092-0

FCC ID: MG3-9700 Test Report #: 4190-1 IC:2575A-9700 02/20/2016 Transmit Frequencies 2402 / 2442 / 2480 MHz were examined and maximized. Worst case data is presented: Test Location: EMCE Engineering •44366 S. Grimmer Blvd • Fremont, CA 94538 • Customer: UEI Specification: FCC 15.209 30 - 25000 Limits Work Order #: 4186 Date: 1/31/2016 Test Type: Radiated Scan Time: 12.39.36 PM Equipment: Remote Control Sequence#: 1 Manufacturer: Universal Electronics, Inc. Tested By: Bob Cole Model: T30 S/N: N/A Test Equipment: Function S/N Calibration Date Cal Due Date Asset # FSV40-B160 Signal 101468 03/28/2015 03/28/2017 755 Analyzer EMCO 3115 Horn 9065-5057 05/20/2015 05/20/2016 608 HP 8449B Preamp 3008A02190 05/15/2015 05/15/2016 749 EMITest v4.01 Build 195 05/01/2014 05/01/2017 610 Measurement Software Equipment Under Test (* = EUT): Function Manufacturer Model # S/N Remote Control* Universal Electronics, Inc. T30 N/A Support Devices: Function Manufacturer Model # S/N Test Conditions / Notes: Transducer Legend: T1=8447 Pre-Amp Asset 377 T2=25' LMR #001 T3=8449B Preamp T4=Sunol 1GHz JB6 S/N A42610 T5=A.H. SAS-200/571 Horn Ext Attn: 0 dB Measurement Data: Reading listed by margin. Test Distance: 3 Meters # Freq Rdng T1 T2 T3 T4 Dist Corr Spec Margin Polar T5 MHz dBµV dB dB dB dB Table dBµV/m dBµV/m dB Ant 1 4884.820M 33.9 +0.0 +2.6 +30.2 +0.0 +0.0 41.2 54.0 -12.8 Vert Ave +34.9 62 2442 Xmit 212 2 1078.920M 40.5 +0.0 +0.9 +29.4 +0.0 +0.0 39.6 54.0 -14.4 Vert Ave +27.6 27 2442 Xmit 151 3 4804.780M 31.0 +0.0 +2.6 +30.3 +0.0 +0.0 38.0 54.0 -16.0 Vert Ave +34.7 92 2402 Xmit 197 4 1511.040M 38.2 +0.0 +1.2 +29.7 +0.0 +0.0 38.0 54.0 -16.0 Vert Ave +28.3 99 2480 Xmit 208 EMCE Engineering, Inc., 44366 S. Grimmer Blvd., Fremont, CA 94538 Page 28 of 31 Tel:510-490-4307 Fax: 510-490-3441 e-mail: bob@universalcompliance.com Accredited by the National Voluntary Laboratory Accreditation Program for the specific scope of Accreditation under Lab Code 200092-0

FCC ID: MG3-9700 Test Report #: 4190-1 IC:2575A-9700 02/20/2016 5 480.110M 34.2 +27.1 +0.7 +0.0 +20.5 +0.0 28.3 47.0 -18.7 Vert QP +0.0 92 2480 Xmit 180 6 288.140M 33.3 +26.9 +0.3 +0.0 +16.7 +0.0 23.4 54.0 -30.6 Vert QP +0.0 181 2402 Xmit 142 EMCE Engineering, Inc., 44366 S. Grimmer Blvd., Fremont, CA 94538 Page 29 of 31 Tel:510-490-4307 Fax: 510-490-3441 e-mail: bob@universalcompliance.com Accredited by the National Voluntary Laboratory Accreditation Program for the specific scope of Accreditation under Lab Code 200092-0

FCC ID: MG3-9700 Test Report #: 4190-1 IC:2575A-9700 02/20/2016 5.7 99% BANDWIDTH LIMITS None – For information purposes only Frequency 99% BW Limit Result (MHz) (MHz) (MHz) 2442 2.467 N/A PASS Date:29.JAN.2016 02:59:07 EMCE Engineering, Inc., 44366 S. Grimmer Blvd., Fremont, CA 94538 Page 30 of 31 Tel:510-490-4307 Fax: 510-490-3441 e-mail: bob@universalcompliance.com Accredited by the National Voluntary Laboratory Accreditation Program for the specific scope of Accreditation under Lab Code 200092-0

FCC ID: MG3-9700 Test Report #: 4190-1 IC:2575A-9700 02/20/2016 6.0 TEST EQUIPMENT DESCRIPTION & MODEL NO. SERIAL NO. CAL. DATE CAL. DUE DATE MANUFACTURER Signal Analyzer FSV40 1321.3008K40- 3/28/15 3/28/17 Rohde-Schwarz 101424-TU Pre-Amplifier(100KHz-1.3GHz) 8447D 2443A03587 5/1/15 5/1/17 Hewlett-Packard BiConiLog Antenna JB6 1090 2/12/15 2/12/17 Sunol Sciences RF Signal Cable 25’ LMR N/A 8/10 /15 8/10 /17 EMCE RF Signal Cable 100’ LMR N/A 8/1 /15 8/1 /17 EMCE EMCE Engineering, Inc., 44366 S. Grimmer Blvd., Fremont, CA 94538 Page 31 of 31 Tel:510-490-4307 Fax: 510-490-3441 e-mail: bob@universalcompliance.com Accredited by the National Voluntary Laboratory Accreditation Program for the specific scope of Accreditation under Lab Code 200092-0


Document Created: 2016-03-07 23:11:24
Document Modified: 2016-03-07 23:11:24
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC