User Manual

FCC ID: MG3-4350

Users Manual

Download: PDF
FCCID_2380808

1 Meet Your Remote 2 Turn On Your Remote 3 Pair Remote for “Aim Anywhere” Control 4 Control Your TV’s Power and Volume 5 Test Voice Control FCC Compliance Statement This equipment has been tested and found to comply with the Your remote arrives with the AA batteries already installed, Control your set-top box without having to point your remote Once your remote is paired with your set-top box, you can use limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable but not activated. Here is how to power it on for the first time. at the device, even when it is located inside a cabinet or voice control. protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate entertainment center. radio frequency energy and, if not used in accordance with the instructions, may cause harmful interference to radio communications. There is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, the user is encouraged to try to correct the interference by one or more of Status LED the following measures: A Pick up your remote and remove the “Pull” tab A Press and hold the Setup button (about 3 seconds) A Using the list on the right, find the first Popular Manufacturer Codes A Press and hold the Voice button until (on back) by pulling away from the remote. The until the Status LED changes from red to green. 5-digit code for your TV manufacturer. you hear the audio tone. • Reorient or relocate the receiving antenna. TV Power All Power • Increase or decrease the separation between the Status LED will blink green four times as the remote LG 10178, 11265 equipment and receiver. powers up (about 5 seconds). B Press the XFINITY button. B Press and hold the Setup button (about • Connect the equipment into an outlet on a circuit 3 seconds) until the Status LED changes Panasonic 10051, 10250 different from that which the receiver is connected. • Consult the dealer or an experienced remote control/ from red to green. TV technician for help. Samsung 10812, 10060 • It is strongly recommended that the TV be plugged Back into a separate wall outlet. Sanyo 10154, 10159 B Speak a voice command to the remote The user is cautioned that changes and modifications made to Voice Control WATCH CNBC Push and hold to talk. FIND The Voice while continuing to hold down the this equipment without the approval of the manufacturer could void the user’s authority to operate this equipment. Sony 10000, 11100 button. Try one of the suggestions to the Start Discover content by SHOW ME all Eagles games channel, program or key SHOW ME all kids movies on HBO left. The Status LED will be solid blue This device complies with part 15 of the FCC rules. Operation is words. XFINITY / Menu B Turn on your TV. C Follow the on-screen instructions to enter the C Enter the first 5-digit code for your TV Sharp 10093, 10165 RECORD The Biggest Loser while you speak your command. subject to the following two conditions: (1) This device may not Access Guide, Saved, LAUNCH Pandora cause harmful interference, and (2) this device must accept any XFINITY On Demand, Apps, 3-digit code that appears. manufacturer. The Status LED should interference received, including interference that may cause GUIDE Remote with Voice Control Search and Settings. C Turn on your set-top box. flash green twice. Toshiba 10156, 11156 undesired operation. WHAT SHOULD I WATCH? Once the code is correctly entered, your XFINITY WHAT’S ON NOW? “Caution” : Exposure to Radio Frequency Radiation. Antenna Remote is paired with the device. Vizio 11758, 11756 shall be mounted in such a manner to minimize the potential for human contact during operation to avoid the possibility of exceeding the FCC radio frequency exposure limit. If your code isn’t listed or you would like to control an audio device, visit C Release the Voice button when your Radio Exposure Statement: This equipment complies with the Number Keys xfinity.com/remotes. command is complete. Look at the TV for FCC radiation exposure limits set forth for devices operating Use predictive text (T9) to in an uncontrolled environment. This equipment should be quickly search for content. Not working? Make sure the battery tab from D Verify that the code was accepted by using the results of your voice command. operated with a minimum distance of 2 cm between the your remote is removed, your TV is on and you are your remote to adjust volume and turn the radiator and front of face. This equipment should not be placed entering the correct 3-digit code on your TV screen. directly on the ear when the speaker is active. TV on and off. TV Input Changes to the next Need to remove Aim Anywhere control? Press Setup and hold the Setup button on the remote until the available input on your TV Program remote for Aim status LED changes from red to green. Press A on Not working? Try the second code listed. Still Not working? Make sure you’re pressing the (if programmed in Step 4) Anywhere or to control your the remote. If the status LED blinks green twice, not working? Visit xfinity.com/remotes for a Voice button while you speak into the remote, TV or audio device. you have successfully removed Aim Anywhere. complete list of manufacturer codes. and release it when complete.


Document Created: 2014-08-19 12:41:22
Document Modified: 2014-08-19 12:41:22
© 2025 FCC.report
This site is not affiliated with or endorsed by the FCC