RF Exposure Info

FCC ID: MCQ-S2CTH

RF Exposure Info

Download: PDF
FCCID_2958077

FCC Part 15, Subpart C, Section 15.247 – DTS Page 57 of 60 XBEE S2C TH, Model S2CTH FCC ID: MCQ-S2CTH 5.3. RF EXPOSURE REQUIRMENTS [§§ 15.247(e)(i), 1.1310 & 2.1091] The criteria listed in the following table shall be used to evaluate the environmental impact of human exposure to radio-frequency (RF) radiation. FCC 47 CFR § 1.1310: 5.3.1. Method of Measurements Refer to Sections 1.1310, 2.1091 In order to demonstrate compliance with MPE requirements (see Section 2.1091), the following information is typically needed: (1) Calculation that estimates the minimum separation distance (20 cm or more) between an antenna and persons required to satisfy power density limits defined for free space. (2) Antenna installation and device operating instructions for installers (professional/unskilled users), and the parties responsible for ensuring compliance with the RF exposure requirement (3) Any caution statements and/or warning labels that are necessary in order to comply with the exposure limits (4) Any other RF exposure related issues that may affect MPE compliance ULTRATECH GROUP OF LABS File #: 16DIGI112_FCC15C247 3000 Bristol Circle, Oakville, Ontario, Canada L6H 6G4 April 08, 2016 Tel. #: 905-829-1570, Fax. #: 905-829-8050, Email: vic@ultratech-labs.com, Website: http://www.ultratech-labs.com All test results contained in this engineering test report are traceable to National Institute of Standards and Technology (NIST)

FCC Part 15, Subpart C, Section 15.247 – DTS Page 58 of 60 XBEE S2C TH, Model S2CTH FCC ID: MCQ-S2CTH Calculation Method of RF Safety Distance: P G EIRP S  4   r 2 4   r 2 Where: P: power input to the antenna in mW EIRP: Equivalent (effective) isotropic radiated power S: power density mW/cm2 G: numeric gain of antenna relative to isotropic radiator r: distance to centre of radiation in cm PG EIRP r  4  S 4  S 5.3.2. RF Evaluation Evaluation of RF Exposure Compliance Requirements RF Exposure Requirements Compliance with FCC Rules Minimum calculated separation distance between Manufacturer’ instruction for separation distance antenna and persons required: *5.62 cm between antenna and persons required: 20 cm Antenna installation and device operating Antenna installation and device operating instructions instructions for installers (professional/unskilled shall be provided to installers to maintain and ensure users), and the parties responsible for ensuring compliance with RF exposure requirements. compliance with the RF exposure requirement Caution statements and/or warning labels that are Refer to user’s manual for RF exposure Information. necessary in order to comply with the exposure limits Any other RF exposure related issues that may None affect MPE compliance *The minimum separation distance between the antenna and bodies of users are calculated using the following formula: P G EIRP r  4   S 4   S S = 1.0 mW/cm2 (26/10) EIRP = 26 dBm = 10 mW = 398.1 mW (Worst Case) EIRP 398.1 (Minimum Safe Distance, r) =   5.62cm 4   S 4    (1.0) ULTRATECH GROUP OF LABS File #: 16DIGI112_FCC15C247 3000 Bristol Circle, Oakville, Ontario, Canada L6H 6G4 April 08, 2016 Tel. #: 905-829-1570, Fax. #: 905-829-8050, Email: vic@ultratech-labs.com, Website: http://www.ultratech-labs.com All test results contained in this engineering test report are traceable to National Institute of Standards and Technology (NIST)


Document Created: 2016-04-11 16:05:41
Document Modified: 2016-04-11 16:05:41
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC