Test report

FCC ID: MCHCM-LT

Test Report

Download: PDF
FCCID_1448944

www.nemko.com Compliance test report 170757-1TRFWL Date of issue April 12, 2011 FCC Part 15, Subpart C, Section §15.239 Operation in the band 88–108 MHz Applicant Decade Transmitters inc. Product FM transmitter Model CM-10 / LT-100 FCC ID MCHCM-LT Nemko Canada Inc., a testing laboratory, is accredited by the Standards Council of Canada. The tests included in this report are within the scope of this accreditation

Test location Nemko Canada Inc. 303 River Road Ottawa, ON, K1V 1H2 CANADA Telephone +1 613 737 9680 Facsimile +1 613 737 9691 Toll free +1 800 563 6336 Website www.nemko.com Tested by Andrey Adelberg, Senior Wireless/EMC Specialist and Reviewed by David Duchesne, Wireless/EMC Specialist Limits of responsibility Note that the results contained in this report relate only to the items tested and were obtained in the period between the date of initial receipt of samples and the date of issue of the report. This test report has been completed in accordance with the requirements of ISO/IEC 17025. All results contain in this report are within Nemko Canada’s ISO/IEC 17025 accreditation. Copyright notification Nemko Canada Inc. authorizes the applicant to reproduce this report provided it is reproduced in its entirety and for use by the company’s employees only. Any use which a third party makes of this report, or any reliance on or decisions to be made based on it, are the responsibility of such third parties. Nemko Canada Inc. accepts no responsibility for damages, if any, suffered by any third party as a result of decisions made or actions based on this report. © Nemko Canada Inc.

Table of contents Section 1: Report summary ......................................................................................................................................................... 4 Section 2: Summary of test results ............................................................................................................................................. 5 Section 3: Equipment under test (EUT) details .......................................................................................................................... 6 Section 4: Engineering considerations....................................................................................................................................... 8 Section 5: Test conditions ........................................................................................................................................................... 9 Section 6: Measurement uncertainty ........................................................................................................................................ 10 Section 7: Test equipment ......................................................................................................................................................... 11 Section 8: Testing data............................................................................................................................................................... 12 8.1 Clause 15.207(a) Conducted limits ............................................................................................................................ 12 8.2 Clause 15.215(c) 20 dB bandwidth ............................................................................................................................ 15 8.3 Clause 15.239(a) Occupied bandwidth ...................................................................................................................... 17 8.4 Clause 15.239(b) Field strength of fundamental emission ......................................................................................... 19 8.5 Clause 15.239(c) Field strength of spurious emissions.............................................................................................. 20 Section 9: Block diagrams of test set-ups................................................................................................................................ 24 Section 10: EUT photos.............................................................................................................................................................. 25 Report reference ID: 170757-1TRFWL Page 3 of 26

Section 1 Report summary Section 1: Report summary 1.1 Applicant Decade Transmitter Inc. 3232 Richard street, unit 4 Sherbrooke, QC J1L 1Y2 Canada 1.2 Manufacturer Decade Transmitter Inc. 3232 Richard street, unit 4 Sherbrooke, QC J1L 1Y2 Canada 1.3 Test specification FCC Part 15, Subpart C, Section §15.239: Operation in the band 88–108 MHz 1.4 Statement of compliance In the configuration tested the EUT was found compliant. This report contains an assessment of apparatus against specifications based upon tests carried out on samples submitted at Nemko Canada Inc. These tests were conducted on a sample of the equipment for the purpose of demonstrating compliance with FCC Part 15 Subpart C. 1.5 Site registration number Test site FCC number 176392 (3 m Semi anechoic chamber) 1.6 Test report revision history Revision # Details of changes made to test report TRF Original report issued Report reference ID: 170757-1TRFWL Page 4 of 26

Section 2 Summary of test results Section 2: Summary of test results 2.1 General requirements for FCC Part 15 Part Test description Verdict (1) §15.31(e) Variation of power source Pass (2) §15.31(m) Number of operating frequencies Pass (3) §15.203 Antenna requirement Pass §15.207(a) Conducted limits Pass §15.215(c) 20 dB bandwidth Pass Notes: (1) - Transmit field strength was verified while supply voltage was varied from 85 to 115 % of the nominal rated supply voltage. No change in transmit field strength was observed. (2) - The frequency range over which the device operates is greater than 10 MHz. Tests were performed on three operating channels (low, mid and high). (3) – The EUT has an integrated antenna 2.2 Specific requirements for FCC Section 15.239 Part Test description Verdict §15.239(a) Occupied bandwidth Pass §15.239(b) Field strength of fundamental emission Pass §15.239(c) Field strength of spurious emissions Pass Report reference ID: 170757-1TRFWL Page 5 of 26

Section 3 Equipment under test (EUT) details Section 3: Equipment under test (EUT) details 3.1 Product details Model CM-10 / LT-100 FCC ID MCHCM-LT Type of product Stereo FM Transmitter 3.2 Product description The Decade CM-10 / Artika LT-100 is a low power FM transmitter operating in the 88–108 MHz band. It is designed around the Rohm BH1415F FM transmitter integrated circuit. This IC contains all the functions needed to implement an FM transmitter: audio limiter, pre- emphasis, 15 kHz low-pass filter, stereo generator (MPX), PLL frequency synthesizer, VCO with varicap diode modulator, RF buffer amplifier and crystal oscillator used by the PLL and the MPX. Beside the BH1415F circuitry, the CM-10 also contains a microphone pre-amplifier, volume controls for both the line inputs and the microphone input, a low-pass filter at the RF output (for harmonics and spurious rejection) and an output attenuator. There is also a MCU used for frequency selection (through UP / DOWN push buttons) and display on a LCD display. Finally, it also contains a power supply that generates the +5 VDC and the +12 VDC voltages used by the various circuits. 3.3 Sample information Receipt date March 16, 2011 Nemko sample ID number 1, 2 Sample model provided Decade CM-10 (representative model) 3.4 EUT technical specifications Operating bands 88–108 MHz Operating frequencies 88.1–107.5 MHz Modulation type FM with 75 kHz deviation Channel spacing 200 kHz Occupied bandwidth 40.7 kHz Emission designator 40K7F8EHF Power source 120 VAC, 60 Hz Antenna types Integrated telescopic antenna Report reference ID: 170757-1TRFWL Page 6 of 26

Section 3 Equipment under test (EUT) details 3.5 Operation of the EUT during testing The EUT was set to transmit on low, mid and high channels. The transmitter input was modulated with a 2.5 kHz tone at a voltage level of 0.5 Vrms. to reach 50 % of rated deviation. 3.6 EUT setup diagram Antenna Audio Power To AC EUT generator adapter mains Item 1 (EUT) Model FM Transmitter CM-10 Part number CM-10 Serial number None Item 2 (Power adapter) Model JVC AC adapter Model number AP-V400U Serial number 0706083890 Report reference ID: 170757-1TRFWL Page 7 of 26

Section 4 Engineering considerations Section 4: Engineering considerations 4.1 Modifications incorporated in the EUT In order to comply with fundamental requirements the client had to perform the following modification: The value of R23 was increased from 1.5K to 2.2K. R23 is part of the output attenuator. 4.2 Deviations from laboratory tests procedures No deviations were made from laboratory test procedures 4.3 Technical judgment None Report reference ID: 170757-1TRFWL Page 8 of 26

Section 5 Test conditions Section 5: Test conditions 5.1 Atmospheric conditions Temperature: 15–30 °C Relative humidity: 20–75 % Air pressure: 86–106 kPa When it is impracticable to carry out tests under these conditions, a note to this effect stating the ambient temperature and relative humidity during the tests shall be recorded and stated. 5.2 Power supply range The normal test voltage for equipment to be connected to the mains shall be the nominal mains voltage. For the purpose of the present document, the nominal voltage shall be the declared voltage, or any of the declared voltages ±5 %, for which the equipment was designed. Report reference ID: 170757-1TRFWL Page 9 of 26

Section 6 Measurement uncertainty Section 6: Measurement uncertainty 6.1 Measurement uncertainty Nemko Canada Inc. has calculated measurement uncertainty and is documented in EMC/MUC/001 “Uncertainty in EMC measurements.” Measurement uncertainty was calculated using the methods described in CISPR 16-4 Specification for radio disturbance and immunity measuring apparatus and methods – Part 4: Uncertainty in EMC measurements; as well as described in UKAS LAB34: The expression of Uncertainty in EMC Testing. Measurement uncertainty calculations assume a coverage factor of K=2 with 95 % certainty. Report reference ID: 170757-1TRFWL Page 10 of 26

Section 7 Test equipment Section 7: Test equipment 7.1 Test equipment list Equipment Manufacturer Model No. Asset/Serial No. Cal. Cycle Next cal. 3 m EMI test chamber TDK SAC-3 FA002047 1 year Mar. 09/12 Flush mount turntable Sunol FM2022 FA002082 — NCR Controller Sunol SC104V FA002060 — NCR Antenna mast Sunol TLT2 FA002061 — NCR International power supply California Inst. 3001I FA001021 1 year Jan. 26/12 Receiver/spectrum analyzer Rohde & Schwarz ESU 26 FA002043 1 year April 14/11 Spectrum analyzer Rohde & Schwarz FSU FA001877 1 year Dec.06/11 Bilog antenna Sunol JB3 FA002108 1 year Jan. 31/12 Horn antenna #2 Emco 3115 FA000825 1 year Feb. 04/12 1–18 GHz pre-amplifier JCA JCA118-503 FA002091 1 year Sept. 23/11 LISN Rohde & Schwarz ENV216 FA002023 1 year Nov. 09/11 50 coax cable Huber + Suhner NONE FA002015 1 year Sept. 01/11 Audio generator GW GAG-808G FA001034 — COU Note: NCR = No Calibrate Required; COU = Calibrate On Use Report reference ID: 170757-1TRFWL Page 11 of 26

Section 8 Testing data Test name Clause 4.6.1 Occupied bandwidth Specification FCC Part 15 Section 8: Testing data 8.1 Clause 15.207(a) Conducted limits Except as shown in paragraphs (b) and (c) of this section, for an intentional radiator that is designed to be connected to the public utility (AC) power line, the radio frequency voltage that is conducted back onto the AC power line on any frequency or frequencies, within the band 150 kHz to 30 MHz, shall not exceed the limits in the following table, as measured using a 50 µH/50 ohms line impedance stabilization network (LISN). Compliance with the provisions of this paragraph shall be based on the measurement of the radio frequency voltage between each power line and ground at the power terminal. The lower limit applies at the boundary between the frequency ranges. Table 8.1-1: Limits for conducted emissions on AC line Conducted limit (dBµV) Frequency of emission (MHz) Quasi-peak Average 0.15–0.5 66 to 56* 56 to 46* 0.5–5 56 46 5–30 60 50 * - Decreases with the logarithm of the frequency. 8.1.1 Test summary Test date March 16, 2011 Test engineer Andrey Adlberg Verdict Pass Temperature 23 °C Air pressure 1004 mbar Relative humidity 30 % 8.1.2 Special notes The spectral scan has been corrected with transducer factors (i.e. cable loss, LISN factors, and attenuators) for determination of compliance. A preview measurement was generated with the receiver in continuous scan mode. Emissions detected within 6 dB or above limit were re- measured with the appropriate detector against the correlating limit and recorded as the final measurement. Report reference ID: 170757-1TRFWL Page 12 of 26

Section 8 Testing data Test name Clause 4.6.1 Occupied bandwidth Specification FCC Part 15 8.1.3 Test data 90 80 70 60 Level in dBµV 50 40 30 20 10 0 150k 300 400 500 800 1M 2M 3M 4M 5M 6 8 10M 20M 30M Frequency in Hz Conducted emissions on phase line CISPR 22 Mains QP Class B.LimitLine CISPR 22 Mains AV Class B.LimitLine Preview Result 1 Preview Result 2 Plot 8.1-1: Conducted emissions on phase line Receiver/Spectrum analyzer settings: 0.15 MHz to 30 MHz Preview measurements Receiver: 9 kHz RBW, Peak (blue) and Average (green) detector, max hold Final measurement Receiver: 9 kHz RBW, Quasi-peak and Average (green) detector Measurement time 100 ms Report reference ID: 170757-1TRFWL Page 13 of 26

Section 8 Testing data Test name Clause 4.6.1 Occupied bandwidth Specification FCC Part 15 8.1.3 Test data, continued 90 80 70 60 Level in dBµV 50 40 30 20 10 0 150k 300 400 500 800 1M 2M 3M 4M 5M 6 8 10M 20M 30M Frequency in Hz Conducted emissions on neutral line CISPR 22 Mains QP Class B.LimitLine CISPR 22 Mains AV Class B.LimitLine Preview Result 1 Preview Result 2 Plot 8.1-2: Conducted emissions on neutral line Receiver/Spectrum analyzer settings: 0.15 MHz to 30 MHz Preview measurements Receiver: 9 kHz RBW, Peak (blue) and Average (green) detector, max hold Final measurement Receiver: 9 kHz RBW, Quasi-peak and Average (green) detector Measurement time 100 ms Report reference ID: 170757-1TRFWL Page 14 of 26

Section 8 Testing data Test name Clause 15.215(c) 20 dB bandwidth Specification FCC Part 15 8.2 Clause 15.215(c) 20 dB bandwidth Intentional radiators operating under the alternative provisions to the general emission limits, as contained in §§15.217 through 15.257 and in Subpart E of this part, must be designed to ensure that the 20 dB bandwidth of the emission, or whatever bandwidth may otherwise be specified in the specific rule section under which the equipment operates, is contained within the frequency band designated in the rule section under which the equipment is operated. The requirement to contain the designated bandwidth of the emission within the specified frequency band includes the effects from frequency sweeping, frequency hopping and other modulation techniques that may be employed as well as the frequency stability of the transmitter over expected variations in temperature and supply voltage. If frequency stability is not specified in the regulations, it is recommended that the fundamental emission be kept within at least the central 80 % of the permitted band in order to minimize the possibility of out-of-band operation. 8.2.1 Test summary Test date March 29, 2011 Test engineer Andrey Adlberg Verdict Pass Temperature 22 °C Air pressure 1002 mbar Relative humidity 31 % 8.2.2 Special notes The test was performed using peak detector of the spectrum analyzer with RBW no narrower than 1 % of the emission bandwidth. Report reference ID: 170757-1TRFWL Page 15 of 26

Section 8 Testing data Test name Clause 15.215(c) 20 dB bandwidth Specification FCC Part 15 8.2.3 Test data * RBW 2 kHz Delta 3 [T1 ] * RBW 2 kHz Delta 3 [T1 ] * VBW 300 kHz -0.01 dB * VBW 300 kHz 0.79 dB Ref 50 dBµV * Att 0 dB SWT 50 ms 39.302051282 kHz Ref 50 dBµV * Att 0 dB SWT 50 ms 40.216410257 kHz 50 Marker 1 [T1 ] 50 Marker 1 [T1 ] 12.71 dBµV 11.26 dBµV 88.081658974 MHz A 97.981257949 MHz A 40 40 2 Delta 2 [T1 ] Delta 2 [T1 ] 1 PK 20.59 dB 1 PK 2 19.40 dB VIEW VIEW 30 19.661025641 kHz 30 20.182051282 kHz 20 20 1 3 PA 3 PA 1 PS PS 10 10 0 0 3DB 3DB -10 AC -10 AC -20 -20 -30 -30 -40 -40 -50 -50 Center 88.10136 MHz 20 kHz/ Span 200 kHz Center 98 MHz 20 kHz/ Span 200 kHz Date: 29.MAR.2011 17:33:02 Date: 29.MAR.2011 17:35:58 Plot 8.2-1: 20 dB BW, low channel Plot 8.2-2: 20 dB BW, mid channel * RBW 2 kHz Delta 3 [T1 ] * VBW 300 kHz 0.64 dB Ref 50 dBµV * Att 0 dB SWT 50 ms 40.064102564 kHz 50 Marker 1 [T1 ] 7.87 dBµV 107.481410256 MHz A 40 Delta 2 [T1 ] 1 PK 20.53 dB VIEW 2 30 20.149743590 kHz 20 PA 3 PS 10 1 0 3DB -10 AC -20 -30 -40 -50 Center 107.5 MHz 20 kHz/ Span 200 kHz Date: 29.MAR.2011 17:34:36 Plot 8.2-3: 20 dB BW, high channel Table 8.2-1: 20 dB bandwidth results Channel 20 dB bandwidth, kHz Low 39.3 Mid 40.2 High 40.1 Report reference ID: 170757-1TRFWL Page 16 of 26

Section 8 Testing data Test name Clause 15.239(a) Occupied bandwidth Specification FCC Part 15.239 8.3 Clause 15.239(a) Occupied bandwidth Emissions from the intentional radiator shall be confined within a band 200 kHz wide centered on the operating frequency. The 200 kHz band shall lie wholly within the frequency range of 88–108 MHz. 8.3.1 Test summary Test date March 16, 2011 Test engineer Andrey Adlberg Verdict Pass Temperature 23 °C Air pressure 1004 mbar Relative humidity 31 % 8.3.2 Special notes The test was performed using peak detector of the spectrum analyzer with RBW no narrower than 1 % of the emission bandwidth. Report reference ID: 170757-1TRFWL Page 17 of 26

Section 8 Testing data Test name Clause 15.239(a) Occupied bandwidth Specification FCC Part 15.239 8.3.3 Test data * RBW 2 kHz Marker 1 [T1 ] * RBW 2 kHz Marker 1 [T1 ] VBW 5 kHz 52.68 dBµV VBW 5 kHz 53.60 dBµV Ref 87 dBµV * Att 10 dB SWT 50 ms 88.101282051 MHz Ref 87 dBµV * Att 10 dB SWT 50 ms 98.001602564 MHz OBW 39.102564103 kHz OBW 40.705128205 kHz Temp 1 [T1 OBW] Temp 1 [T1 OBW] 80 80 33.13 dBµV A 34.10 dBµV A 88.081730769 MHz 97.981089744 MHz 1 PK Temp 2 [T1 OBW] 1 PK Temp 2 [T1 OBW] 70 70 MAXH MAXH 33.32 dBµV 34.87 dBµV 88.120833333 MHz 98.021794872 MHz 60 TDS 60 TDS 1 1 50 PS 50 PS 40 40 T1 T2 T1 T2 30 3DB 30 3DB AC AC 20 20 10 10 0 0 -10 -10 Center 88.10128205 MHz 20 kHz/ Span 200 kHz Center 98.00160256 MHz 20 kHz/ Span 200 kHz Date: 16.MAR.2011 15:57:02 Date: 16.MAR.2011 16:00:24 Plot 8.3-1: 99 % occupied BW, low channel Plot 8.3-2: 99 % occupied BW, mid channel * RBW 2 kHz Marker 1 [T1 ] VBW 5 kHz 53.10 dBµV Ref 87 dBµV * Att 10 dB SWT 50 ms 107.501522436 MHz OBW 40.384615385 kHz Temp 1 [T1 OBW] 80 33.32 dBµV A 107.481330128 MHz 1 PK Temp 2 [T1 OBW] 70 MAXH 33.59 dBµV 107.521714744 MHz 60 TDS 1 50 PS 40 T1 T2 30 3DB AC 20 10 0 -10 Center 107.5015224 MHz 20 kHz/ Span 200 kHz Date: 16.MAR.2011 15:55:24 Plot 8.3-3: 99 % occupied BW, high channel Table 8.3-1: 99 % occupied bandwidth results Channel 99 % bandwidth, kHz BW limit, kHz Margin, kHz Low 39.1 200 160.9 Mid 40.7 200 159.3 High 40.4 200 159.6 Lower band edge is 88.082 MHz (Plot 8.3-1, Temp1; above 88 MHz) and upper band edge is 107.52 MHz (Plot 8.3-3, Temp2; below 108 MHz). 99 % bandwidth lies wholly within 88–108 MHz band. Lower channel central frequency is 88.101 MHz – 100 kHz = 88.001 MHz (lies within 88– 108 MHz band). Upper channel central frequency is 107.501 MHz + 100 kHz = 107.601 MHz (lies within 88–108 MHz band). Report reference ID: 170757-1TRFWL Page 18 of 26

Section 8 Testing data Test name Clause 15.239(b) Field strength of fundamental emission Specification FCC Part 15.239 8.4 Clause 15.239(b) Field strength of fundamental emission The field strength of any emissions within the permitted 200 kHz band shall not exceed 250 microvolts/meter at 3 meters. The emission limit in this paragraph is based on measurement instrumentation employing an average detector. The provisions in §15.35 for limiting peak emissions apply. 8.4.1 Test summary Test date March 29, 2011 Test engineer Andrey Adlberg Verdict Pass Temperature 23 °C Air pressure 1003 mbar Relative humidity 31 % 8.4.2 Special notes The test was performed using spectum analyzer with 100 kHz RBW and 300 kHz VBW average and peak detector were applied. 8.4.3 Test data Table 8.4-1: Field strength of average fundamental emissions results Frequency, MHz Average field strength, dBµV/m Average field strength limit, dBµV/m Margin, dB 88.1 41.4 48.0 6.6 98.0 41.4 48.0 6.6 107.5 41.3 48.0 6.7 Table 8.4-2: Field strength of peak fundamental emissions results Frequency, MHz Peak field strength, dBµV/m Peak field strength limit, dBµV/m Margin, dB 88.1 42.5 68.0 25.5 98.0 42.1 68.0 25.9 107.5 42.1 68.0 25.9 The test was performed using spectum analyzer with 100 kHz RBW, after the test RBW was tuned to 200 kHz, no significant change in peak and average field strengths were observed. Report reference ID: 170757-1TRFWL Page 19 of 26

Section 8 Testing data Test name Clause 15.239(c) Field strength of spurious emissions Specification FCC Part 15.239 8.5 Clause 15.239(c) Field strength of spurious emissions The field strength of any emissions radiated on any frequency outside of the specified 200 kHz band shall not exceed the general radiated emission limits in §15.209. Table 8.5-1: FCC 15.209 Radiated emissions limits Field strength Frequency (MHz) (µV/m) (dBµV/m) 30–88 100 40.0 88–216 150 43.5 216–960 200 46.0 above 960 500 54.0 8.5.1 Test summary Test date March 29, 2011 Test engineer Andrey Adlberg Verdict Pass Temperature 22 °C Air pressure 1003 mbar Relative humidity 30 % 8.5.2 Special notes The EUT was scanned from 30 to 1000 MHz. Spectrum analyzer was set to use CISPR quasi-peak detector with RBW of 120 kHz. Report reference ID: 170757-1TRFWL Page 20 of 26

Section 8 Testing data Test name Clause 15.239(c) Field strength of spurious emissions Specification FCC Part 15.239 8.5.3 Test data 55 50 45 40 Level in dBµV/m 35 30 25 20 15 10 30M 50 60 80 100M 200 300 400 500 800 1G Frequency in Hz Radiated emissions MaxPeak-MaxHold FCC Part 15.239 average limit line (250 uV/m) FCC Part 15.209 quasi-peak limit line MaxPeak (Single) QuasiPeak (Single) Average (Single) Plot 8.5-1: Radiated spurious emissions, low channel Table 8.5-2: Low channel radiated spurious emissions results Frequency, MHz Field strength, dBµV/m Limit, dBµV/m Margin, dB 88.00 21.85 40.00 18.15 440.48 32.40 46.00 13.60 Report reference ID: 170757-1TRFWL Page 21 of 26

Section 8 Testing data Test name Clause 15.239(c) Field strength of spurious emissions Specification FCC Part 15.239 8.5.3 Test data, continued 55 50 45 40 Level in dBµV/m 35 30 25 20 15 10 30M 50 60 80 100M 200 300 400 500 800 1G Frequency in Hz Radiated emissions MaxPeak-MaxHold FCC Part 15.239 average limit line (250 uV/m) FCC Part 15 .209 quasi-peak limit line MaxPeak (Single) Average (Single) Plot 8.5-2: Radiated spurious emissions, mid channel Table 8.5-3: Mid channel radiated spurious emissions results Frequency, MHz Field strength, dBµV/m Limit, dBµV/m Margin, dB 490.00 34.1 46.0 11.9 Report reference ID: 170757-1TRFWL Page 22 of 26

Section 8 Testing data Test name Clause 15.239(c) Field strength of spurious emissions Specification FCC Part 15.239 8.5.3 Test data, continued 55 50 45 40 Level in dBµV/m 35 30 25 20 15 10 30M 50 60 80 100M 200 300 400 500 800 1G Frequency in Hz Radiated emissions MaxPeak-MaxHold FCC Part 15.239 average limit line (250 uV/m) FCC Part 15.209 quasi-peak limit line MaxPeak (Single) QuasiPeak (Single) Average (Single) Plot 8.5-2: Radiated spurious emissions, high channel Table 8.5-4: High channel radiated spurious emissions results Frequency, MHz Field strength, dBµV/m Limit, dBµV/m Margin, dB 108.00 21.79 43.50 21.71 322.48 27.60 46.00 18.40 430.00 31.90 46.00 14.10 Report reference ID: 170757-1TRFWL Page 23 of 26

Section 9 Block diagrams of test set-ups Section 9: Block diagrams of test set-ups Radiated emissions set-up Radio absorbing material Antenna mast Test antenna 3m Variable search height 4m Test EUT antenna Non-conducting 1m 80 cm Turntable Metal ground plane To test receiver Conducted emissions set-up Vertical ground plane 40 cm from EUT EUT 80 cm Power cable 80 cm Non- conducting Turntable LISN To test receiver To power supply Report reference ID: 170757-1TRFWL Page 24 of 26

Section 10 EUT photos Section 10: EUT photos EUT Report reference ID: 170757-1TRFWL Page 25 of 26

Section 10 EUT photos EUT, continued Report reference ID: 170757-1TRFWL Page 26 of 26


Document Created: 2011-04-12 15:50:13
Document Modified: 2011-04-12 15:50:13
© 2025 FCC.report
This site is not affiliated with or endorsed by the FCC