SAR dipole 5G

FCC ID: MAU040

RF Exposure Info

Download: PDF
FCCID_1346629

Calibration Laboratory of Sbwl iD/y Schweizerischer Kalibrierdienst SA Schmid & Partner Service suisse d‘étalonnage Engineering AG Servizio svizzero di taratura Zeughausstrasse 43, 8004 Zurich, Switzerland Swiss Calibration Service Accredited by the Swiss Accreditation Service (SAS) Accreditation No.: SCS 108 The Swiss Accreditation Service is one of the signatories to the EA Multifateral Agreement for the recognition of calibration certificates Client CC§—TW (Auden) Certificate No: D5GHzV2—1004_Feb10/2 |CALIBRATION CERTIFICATE (Replacement of No:D5GHzV2—1004_Feb10) | Object D5GHzV2 — SN: 1004 Calibration procedure(s) QA CAL—22.v1 Calibration procedure for dipole validation kits between 3—6 GHz Calibration date: February 25, 2010 This calibration certificate documents the traceatbility to national standards, which realize the physical units of measurements (S1). The measurements and the uncertainties with confidence probability are given on the following pages and are part of the certificate. All calibrations have been conducted in the closed laboratory facility: environment temperature (22 + 3)°C and humidity < 70%. Calibration Equipment used (M&TE critical for calibration) Primary Standards ID # Cal Date (Cerfificate No.) Scheduled Calibration Power meter EPM—442A GB37480704 06—Oct—09 (No. 217—01086) Oct—10 Power sensor HP 8481A US37292783 06—Oct—09 (No. 217—01086) Oct—10 Reference 20 dB Attenuator SN: 5086 (20g) 31—Mar—09 (No. 217—01025) Mar—10 Type—N mismatch combination SN: 5047.2 / 06327 31—Mar—09 (No. 217—01029) Mar—10 Reference Probe EX3DV4 SN: 3503 11—Mar—09 (No. EX3—3503_Mar09) Mar—10 DAE4 SN: 601 O7—Mar—09 (No. DAE4—601_Mar09) Mar—10 Secondary Standards ID # Check Date (in house) Scheduled Check Power sensor HP 8481A MY41092317 18—Oct—02 (in house check Oct—09) In house check: Oct—11 RF generator R&S SMT—06 100005 4—Aug—99 (in house check Oct—09) In house check: Oct—11 Network Analyzer HP 8759E US373900585 S4206 18—Oct—01 (in house check Oct—09) In house check: Oct—10 Name Function Signature Calibrated by: Jeton Kastrati Laboratory Technician f fi—: ¥ Approved by: KatJa Pokovic Technical Manager %%—' Issued: April 21, 2010 This calibration certificate shall not be reproduced exceptin full without written approval of the laboratory. Certificate No: D5GHzV2—1004_Feb10/2 Page 1 of 14

Calibration Laboratory of Schweizerischer Kalibrierdienst Schmid & Partner Service suisse d‘étalonnage Engineering AG Servizio svizzero di taratura Zeughausstrasse 43, 8004 Zurich, Switzerland Swiss Calibration Service Accredited by the Swiss Accreditation Service (SAS) Accreditation No.: SCS 108 The Swiss Accreditation Service is one of the signatories to the EA Multilateral Agreement for the recognition of calibration certificates Glossary: TSL tissue simulating liquid ConvF sensitivity in TSL / NORM x,y,z N/A not applicable or not measured Calibration is Performed According to the Following Standards: a) IEC Std 62209 Part 2, "Evaluation of Human Exposure to Radio Frequency Fields from Handheld and Body—Mounted Wireless Communication Devices in the Frequency Range of 30 MHz to 6 GHz: Human models, Instrumentation, and Procedures"; Part 2: "Procedure to determine the Specific Absorption Rate (SAR) for including accessories and multiple transmitters", Draft Version 0.9, December 2004 b) Federal Communications Commission Office of Engineering & Technology (FCC OET), "Evaluating Compliance with FCC Guidelines for Human Exposure to Radiofrequency Electromagnetic Fields; Additional Information for Evaluating Compliance of Mobile and Portable Devices with FCC Limits for Human Exposure to Radiofrequency Emissions", Supplement C (Edition 01—01) to Bulletin 65 Additional Documentation: c) DASY4/5 System Handbook Methods Applied and Interpretation of Parameters: * Measurement Conditions: Further details are available from the Validation Report at the end of the certificate. All figures stated in the certificate are valid at the frequency indicated. e Antenna Parameters with TSL: The dipole is mounted with the spacer to position its feed point exactly below the center marking of the flat phantom section, with the arms oriented paralle! to the body axis. * Feed Point Impedance and Return Loss: These parameters are measured with the dipole positioned under the liquid filled phantom. The impedance stated is transformed from the measurement at the SMA connector to the feed point. The Return Loss ensures low reflected power. No uncertainty required. e Electrical Delay: One—way delay between the SMA connector and the antenna feed point. No uncertainty required. e SAR measured: SAR measured at the stated antenna input power. * SAR normalized: SAR as measured, normalized to an input power of 1 W at the antenna connector. * SAR for nominal TSL parameters: The measured TSL parameters are used to calculate the nominal SAR result. Certificate No: D5GHzV2—1004_Feb10/2 Page 2 of 14

Measurement Conditions DASY system configuration, as far as not given on page 1. DASY Version DASYS V5.2 Extrapolation Advanced Extrapolation Phantom Modular Flat Phantom V5.0 Distance Dipole Center — TSL 10 mm with Spacer Area Scan resolution dx, dy = 10 mm Zoom Scan Resolution dx, dy = 4.0 mm, dz =2.5 mm 5200 MHz +1 MHz Frequency 5500 MHz +1 MHz 5800 MHz + 1 MHz Head TSL parameters at 5200 MHz The following parameters and calculations were applied. Temperature Permittivity Conductivity Nominal Head TSL parameters 22.0 °C 36.0 4.66 mho/m Measured Head TSL parameters (22.0 £ 0.2) °C 34.9 16 % 4.51 mho/m £ 6 % Head TSL temperature during test (22.0 + 0.2) °C SAR result with Head TSL at 5200 MHz SAR averaged over 1 cm‘ (1 g) of Head TSL condition SAR measured 100 mW input power 7.51 mWw /g SAR normalized normalized to 1W 75.1 mW /g SAR for nominal Head TSL parameters normalized to 1W 74.6 mW / g + 19.9 % (k=2) SAR averaged over 10 cm* (10 g) of Head TSL condition SAR measured 100 mW input power 2.13 mW /g SAR normalized normalized to 1W 21.3 mW /g SAR for nominal Head TSL parameters normalized to 1W 21.1 mW / g + 19.5 % (k=2) Certificate No: D5GHzV2—1004_Feb10/2 Page 3 of 14

Head TSL parameters at 5500 MHz The following parameters and calculations were applied. Temperature Permittivity Conductivity Nominal Head TSL parameters 22.0 °C 35.6 4.96 mho/m Measured Head TSL parameters (22.0 + 0.2) °C 34.3 £ 6 % 4.78 mho/m + 6 % Head TSL temperature during test (21.5 £0.2) °C SAR result with Head TSL at 5500 MHz SAR averaged over 1 cm‘ (1 g) of Head TSL condition SAR measured 100 mW input power 8.31 mW /g SAR normalized normalized to 1W 83.1 mW /g SAR for nominal Head TSL parameters normalized to 1W 82.4 mW / g + 19.9 % (k=2) SAR averaged over 10 cm‘ (10 g) of Head TSL condition SAR measured 100 mW input power 2.36 mW /g SAR normalized normalized to 1W 23.6 mW /g SAR for nominal Head TSL parameters normalized to 1W 23.4 mW / g # 19.5 % (Kk=2) Head TSL parameters at 5800 MHz The following parameters and calculations were applied. Temperature Permittivity Conductivity Nominal Head TSL parameters 22.0 °C 35.3 5.27 mho/m Measured Head TSL parameters (22.0 £ 0.2) °C 33.7 2 6 % 5.04 mho/m + 6 % Head TSL temperature during test (21.5 £ 0.2) °C SAR result with Head TSL at 5800 MHz SAR averaged over 1 cm* (1 g) of Head TSL condition SAR measured 100 mW input power 7.67 mw /g SAR normalized normalized to 1W 76.7 mW /g SAR for nominal Head TSL parameters normalized to 1W 75.9 mW / g x 19.9 % (K=2) SAR averaged over 10 cm‘ (10 g) of Head TSL condition SAR measured 100 mW input power 2.18 mW /g SAR normalized normalized to 1W 21.8 mW /g SAR for nominal Head TSL parameters normalized to 1W 21.5 mW / g # 19.5 % (k=2) Certificate No: D5GHzV2—1004_Feb10/2 Page 4 of 14

Body TSL parameters at 5200 MHz The following parameters and calculations were applied. Temperature Permittivity Conductivity Nominal Body TSL parameters 22.0 °C 49.0 5.30 mho/m Measured Body TSL parameters (22.0 £ 0.2) °C 47.3 x6 % 5.45 mho/m + 6 % Body TSL temperature during test (22.0 + 0.2) °C SAR result with Body TSL at 5200 MHz SAR averaged over 1 cm* {1 g) of Body TSL condition SAR measured 100 mW input power 7.54 mW / g SAR normalized normalized to 1W 75.4 mW / g SAR for nominal Body TSL parameters normalized to 1W 74.9 mW / g + 19.9 % (k=2) SAR averaged over 10 cm* (10 g) of Body TSL condition SAR measured 100 mW input power 211 mWw /g SAR normalized normalized to 1W 21.1 mW /g SAR for nominal Body TSL parameters normalized to 1W 21.0 mW / g + 19.5 % (k=2) Body TSL parameters at 5500 MHz The following parameters and calculations were applied. Temperature Permittivity Conductivity Nominal Body TSL parameters 22.0 °C 48.6 5.65 mho/m Measured Body TSL parameters (22.0 + 0.2) °C 46.7 +6 % 5.82 mho/m + 6 % Body TSL temperature during test (22.0 + 0.2) °C SAR result with Body TSL at 5500 MHz SAR averaged over 1 cm‘ (1 g) of Body TSL condition SAR measured 100 mW input power 8.14 mW /g SAR normalized normalized to 1W 81.4 mW /g SAR for nominal Body TSL parameters normalized to 1W 80.8 mW / g + 19.9 %(k=2) SAR averaged over 10 cm* (10 g) of Body TSL condition SAR measured 100 mW input power 2.26 mW /g SAR normalized normalized to 1W 22.6 mW /g SAR for nominal Body TSL parameters normalized to 1W 22.4 mW / g * 19.5 % (k=2) Certificate No: D5GHzV2—1004_Feb10/2 Page 5 of 14

Body TSL parameters at 5800 MHz The following parameters and calculations were applied. Temperature Permittivity Conductivity Nominal Body TSL parameters 22.0 °C 48.2 6.00 mho/m Measured Body TSL parameters (22.0 £ 0.2) °C 46.0 + 6 % 6.18 mho/m + 6 % Body TSL temperature during test (22.0 + 0.2) °C SAR result with Body TSL at 5800 MHz SAR averaged over 1 cm‘ (1 g) of Body TSL condition SAR measured 100 mW input power 7.22 mW /g SAR normalized normalized to 1W 72.2 mW /g SAR for nominal Body TSL parameters normalized to 1W 71.6 mW / g £ 19.9 % (k=2) SAR averaged over 10 cm‘ (10 g) of Body TSL condition SAR measured 100 mW input power 2.00 mW /g SAR normalized normalized to 1W 20.0 mWw /g SAR for nominal Body TSL parameters normalized to 1W 19.8 mW / g £ 19.5 % (k=2) Certificate No: D5GHzV2—1004_Feb10/2 Page 6 of 14

Appendix Antenna Parameters with Head TSL at 5200 MHz Impedance, transformed to feed point 49.7 0 — 9.9 jQ Return Loss —20.1 dB Antenna Parameters with Head TSL at 5500 MHz Impedance, transformed to feed point 52.7 O — 3.7 |Q Return Loss —27.0 dB Antenna Parameters with Head TSL at 5800 MHz Impedance, transformed to feed point 58.3 Q — 5.3 jQ Return Loss —20.8 dB Antenna Parameters with Body TSL at 5200 MHz Impedance, transformed to feed point 49.8 Q — 8.8 jQ Return Loss ~21.2 dB Antenna Parameters with Body TSL at 5500 MHz Impedance, transformed to feed point 51,2 0 —1.1 jQ Return Loss ~35.8 dB Antenna Parameters with Body TSL at 5800 MHz Impedance, transformed to feed point 59.7 Q — 0.6 jQ Return Loss ~21.0 dB Certificate No: D5GHzV2—1004_Feb10/2 Page 7 of 14

General Antenna Parameters and Design Electrical Delay (one direction) 1.153 ns After long term use with 40 W radiated power, only a slight warming of the dipole near the feedpoint can be measured. The dipole is made of standard semirigid coaxial cable. The center conductor of the feeding line is directly connected to the second arm of the dipole. The antenna is therefore short—circuited for DC—signals. No excessive force must be applied to the dipole arms, because they might bend or the soldered connections near the feedpoint may be damaged. Additional EUT Data Manufactured by SPEAG Manufactured on July 08, 2003 Certificate No: D5GHzV2—1004_Feb10/2 Page 8 of 14

DASY5 Validation Report for Head TSL Date/Time: 24.02.2010 13:02:28 Test Laboratory: SPEAG, Zurich, Switzerland DUT: Dipole 5GHz; Type: D5GHzV2; Serial: D5GHzV2 — SN:1004 Communication System: CW—5GHz; Frequency: 5200 MHz, Frequency: 5500 MHz, Frequency: 5800 MHz; Duty Cycle: :1 Medium: HSL 3—6 GHz Medium parameters used: f = 5200 MHz; 0 = 4.51 mho/m; &, = 34.9; p = 1000 kg/m* , Medium parameters used: f = 5500 MHz; 0 = 4.8 mho/m; &, = 34.3; p = 1000 kg/m" , Medium parameters used: f = 5800 MHz; 0 = 5.06 mho/m; & = 33.6; p = 1000 kg/m* Phantom section: Flat Section Measurement Standard: DASYS (IEEE/IEC/ANSI €63.19—2007) DASY5 Configuration: ® Probe: EX3DV4 — SN3503; ConvF(5.36, 5.36, 5.36), ConvF(4.85, 4.85, 4.85), ConvF(4.74, 4.74, 4.74); Calibrated: 11.03.2009 * Sensor—Surface: 2mm (Mechanical Surface Detection) * Electronics: DAE4 Sn601; Calibrated: 07.03.2009 * Phantom: Flat Phantom 5.0 (front); Type: QDOOOPS5OAA; Serial: 1001 * Measurement SW: DASY5, V5.2 Build 157; SEMCAD X Version 14.0 Build 57 DSGHzV2 Dipole/d=10mm, Pin=100mW, £=5200 MHz/Area Scan (91x91x1); Measurement grid: dx=10mm, dy=10mm Maximum value of SAR (interpolated) = 15.1 mW/g D5GHzV2 Dipole/d=10mm, Pin=100mW, £=5200 MHz/Zoom Scan (4x4x2.5mm), dist=2mm (8x8x10)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=2.5mm Reference Value = 63.4 V/m; Power Drift = 0.050 dB Peak SAR (extrapolated) = 29 W/kg SAR(1 g) = 7.51 mW/g; SAR(10 g) = 2.13 mW/g Maximum value of SAR (measured) = 14.9 mW/g D5GHzV2 Dipole/d=10mm, Pin=100mW, £=5500 MHz/Zoom Scan (4x4x2.5mm), dist=2mm (8x8x10)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=2.5mm Reference Value = 64.5 V/m; Power Drift = 0.063 dB Peak SAR (extrapolated) = 33.6 W/kg SAR(I g) = 8.31 mW/g; SAR(10 g) = 2.36 mW/g Maximum value of SAR (measured) = 16.8 mW/g — > — $ "— * * (8x8x10)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=2.5mm Reference Value = 61 V/m; Power Drift = 0.090 dB Peak SAR (extrapolated) = 32.4 W/kg SAR(I g) = 7.67 mW/g; SAR(10 g) = 2.18 mW/g Maximum value of SAR (measured) = 15.6 mW/g Certificate No: D5GHzV2—1004_Feb10/2 Page 9 of 14

0 dB = 15.6mW/g Certificate No: D5GHzV2—1004_Feb10/2 Page 10 of 14

Impedance Measurement Plot for Head TSL 24 Feb 2010 10:01154 CHI] s1 1 uo rs 11 49.744 a —9.9121 0 9.0878 pF 5 200.000 gea MHz tm t ‘\ i \ CH1 Markers Ne ‘ ‘ | \ 2152686 a / © ‘ . *A —3.7070 a tor [ 4 / % 5.50000 GHz 4 3:58,340 a « ~5.2949 a \ \ 5.90000 GHz \ f f Av 7 16° { / # A { + — | w CH2 Si1 LOG._ 5 dB/REF. ~20. dB. . Ai—20, . 5.200.000 009 MHz 4 T CH2 Markers mm mt = upmucs 2—27,019 dB Cor _ 5.50000 GHz 3:—20.912 dB 5.90000 GHz M¥S Ay |. lzflls _ 4 on _z woooohojs _ START 5 080.000Ga0 MHz . DT STOP 6 600.000600MHz. Certificate No: D5GHzV2—1004_Feb10/2 Page 11 of 14

DASY5 Validation Report for Body TSL Date/Time: 25.02.2010 11:29:48 Test Laboratory: SPEAG, Zurich, Switzerland DUT: Dipole 5GHz; Type: DSGHzV2; Serial: D5SGHzV2 — SN:1004 Communication System: CW; Frequency: 5200 MHz, Frequency: 5500 MHz, Frequency: 5800 MHz; Duty Cycle: 1:1 Medium: MSL 3—6 GHz Medium parameters used: £= 5200 MHz; 5 = 5.45 mho/m; &, = 47.3; p = 1000 kg/m‘ , Medium parameters used: f= 5500 MHz; o = 5.82 mho/m; &, = 46.7; p = 1000 kg/m3 , Medium parameters used: f = 5800 MHz; 0 = 6.18 mho/m; £, = 46; p = 1000 kg/m3 Phantom section: Flat Section Measurement Standard: DASY5 (IEEE/IEC/ANSI €63.19—2007) DASY5 Configuration: ® Probe: EX3DV4 — SN3503; ConvP(4.88, 4.88, 4.88), ConvFP(4.37, 4.37, 4.37), ConvF(4.57, 4.57, 4.57); Calibrated: 11.03.2009 * Sensor—Surface: 2mm (Mechanical Surface Detection) ® Electronics: DAE4 Sn601; Calibrated: 07.03.2009 * Phantom: Flat Phantom 5.0 (back); Type: QDOOOP50AA; Serial: 1002 ® Measurement SW: DASY5, V5.2 Build 157; SEMCAD X Version 14.0 Build 57 D5SGHzV2 Dipole/d=10mm, Pin=100mW, £=5200 MHz/Area Scan (91x91x1); Measurement grid: dx=1Omm, dy=10mm Maximum value of SAR (interpolated) = 14.8 mW/g D5GHzV2 Dipole/d=10mm, Pin=100mW, £=5200 MHz/Zoom Scan (4x4x2.5mm), dist=2mm (8x8x10)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=2.5mm Reference Value = 58.6 V/m; Power Drift = —0.00597 dB Peak SAR (extrapolated) = 28.3 W/kg SAR(1 g) = 7.54 mW/g; SAR(10 g) = 2.11 mW/ig Maximum value of SAR (measured) = 14.4 mW/g D5GHzV2 Dipole/d=10mm, Pin=100mW, £=5500 MHz/Zoom Scan (4x4x2.5mm), dist=2mm (8x8x10)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=2.5mm Reference Value = 59.7 V/m; Power Drift = —0.014 dB Peak SAR (extrapolated) = 32.8 W/kg SAR(1 g) = 8.14 mW/g; SAR(10 g) = 2.26 mW/g Maximum value of SAR (measured) = 16 mW/g DS5GHzV2 Dipole/d=10mm, Pin=100m W, £=5800 MHz/Zoom Scan (4x4x2.5mm), dist=2mm (8x8x10)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=2.5mm Reference Value = 54.6 V/m; Power Drift = —0.029 dB Peak SAR (extrapolated) = 30.9 W/kg SAR(1 g) = 7.22 mW/g; SAR(10 g) = 2 mW/g Maximum value of SAR (measured)= 14.3 mW/g Certificate No: D5GHzV2—1004_Feb10/2 Page 12 of 14

0 dB = 14.3mW/g Certificate No: D5GHzV2—1004_Feb10/2 Page 13 of 14

Impedance Measurement Plot for Body TSL 25 Feb 2010 @9:19:17 CHI si1 1 U FS 1:149.798 6 —©.7500 a 24979 pF 5 200.000 000 MHz > 1 CH1 Markers De 1 2 51.298 a ~1.0645 a se—— Cor 5.50000 GHz 3t 59.727 a —560.55 m 5.80008 GHz Ave 16 CH2 ®fEF _ ~20 dB j io. o ani—L— i _ lj i ‘ CH2 Markers 1 : . 2—350.017 dB i t Poj Cor 5.50000 GHz ; i e $:1—21.035 dB 5.980000 GHz ; Av 159 1 5ou i i ~START 5 000.000008 Nhz i Certificate No: D5GHzV2—1004_Feb10/2 Page 14 of 14


Document Created: 2019-10-21 22:04:50
Document Modified: 2019-10-21 22:04:50
© 2025 FCC.report
This site is not affiliated with or endorsed by the FCC