07LR033SAR F Appendix E Probe 835 body

FCC ID: MAU028

RF Exposure Info

Download: PDF
FCCID_912547

NCL CALIBRATION LABORATORIES Calibration File No.: CP-756 Client.: Wistron C E R T I F I C A T E OF C A L I B R A T I O N It is certified that the equipment identified below has been calibrated in the NCL CALIBRATION LABORATORIES by qualified personnel following recognized procedures and using transfer standards traceable to NRC/NIST. Equipment: Miniature Isotropic RF Probe 835 MHz Manufacturer: APREL Laboratories Model No.: E-020 Serial No.: 266 Calibration in Body Tissue Calibration Procedure: SSI/DRB-TP-D01-032-E020-V2 Project No: QTKB-WISB-ALS-E020-16CAL-5290 th Calibrated: 9 July 2007 th Released on: 13 July 2007 NCL CALIBRATION LABORATORIES 51 SPECTRUM WAY Division of APREL Lab. NEPEAN, ONTARIO TEL: (613) 820-4988 CANADA K2R 1E6 FAX: (613) 820-4161

NCL Calibration Laboratories Division of APREL Laboratories. Introduction This Calibration Report reproduces the results of the calibration performed in line with the SSI/DRB-TP-D01-032-E020-V2 E-Field Probe Calibration Procedure. The results contained within this report are for APREL E-Field Probe E-020 266. References SSI/DRB-TP-D01-032-E020-V2 E-Field Probe Calibration Procedure IEEE 1528 “Recommended Practice for Determining the Peak Spatial-Average Specific Absorption Rate (SAR) in the Human Body Due to Wireless Communications Devices: Experimental Techniques” SSI-TP-011 Tissue Calibration Procedure Conditions Probe 266 was a new probe taken from stock prior to calibration. Ambient Temperature of the Laboratory: 22 °C +/- 0.5°C Temperature of the Tissue: 21 °C +/- 0.5°C Page 2 of 10 This page has been reviewed for content and attested to on Page 2 of this document.

NCL Calibration Laboratories Division of APREL Laboratories. Calibration Results Summary Probe Type: E-Field Probe E-020 Serial Number: 266 Frequency: 835 MHz Sensor Offset: 1.56 mm Sensor Length: 2.5 mm Tip Enclosure: Ertalyte* Tip Diameter: <5 mm Tip Length: 60 mm Total Length: 290 mm *Resistive to recommended tissue recipes per IEEE-1528 Sensitivity in Air Channel X: 1.2 µV/(V/m)2 Channel Y: 1.2 µV/(V/m)2 Channel Z: 1.2 µV/(V/m)2 Diode Compression Point: 95 mV Page 3 of 10 This page has been reviewed for content and attested to on Page 2 of this document.

NCL Calibration Laboratories Division of APREL Laboratories. Sensitivity in Body Tissue Frequency: 835 MHz Epsilon: 56.1 (+/-5%) Sigma: 0.95 S/m (+/-10%) ConvF Channel X: 6.8 Channel Y: 6.8 Channel Z: 6.8 Tissue sensitivity values were calculated using the load impedance of the APREL Laboratories Daq-Paq. Boundary Effect: Uncertainty resulting from the boundary effect is less than 2% for the distance between the tip of the probe and the tissue boundary, when less than 2.44mm. Spatial Resolution: The measured probe tip diameter is 5 mm (+/- 0.01 mm) and therefore meets the requirements of SSI/DRB-TP-D01-032 for spatial resolution. Page 4 of 10 This page has been reviewed for content and attested to on Page 2 of this document.

NCL Calibration Laboratories Division of APREL Laboratories. Receiving Pattern 835 MHz (Air) Receiving Pattern Probe s/n 266 835MHz 0 350 1.2 10 340 20 330 30 1 320 40 310 0.8 50 300 0.6 60 290 0.4 70 280 0.2 80 270 0 90 260 100 250 110 240 120 230 130 220 140 210 150 200 160 190 170 180 Ch1 Ch2 Ch3 Tot Page 5 of 10 This page has been reviewed for content and attested to on Page 2 of this document.

NCL Calibration Laboratories Division of APREL Laboratories. Isotropy Error 835 MHz (Air) Isotropy Error Probe s/n 266 835MHz 10 9 8 7 6 5 4 3 Error [dB] 2 1 0 -1 -2 -3 -4 -5 -6 -7 -8 -9 -10 0 100 200 300 Isotropy Plot Probe s/n 266 835MHz 0.8 0.7 0.6 Voltage (mV) 0.5 0.4 0.3 0.2 0.1 0 0 100 200 300 Degrees (x10) Ch1 Ch2 Ch3 Isotropicity in Tissue: 0.10 dB Page 6 of 10 This page has been reviewed for content and attested to on Page 2 of this document.

NCL Calibration Laboratories Division of APREL Laboratories. Dynamic Range Probe 266 Dynamic Range 10000 1000 100 Voltage [microV] Uncompensated 10 Compensated 1 0.1 0.01 1.00 10.00 100.00 1,000.00 10,000.00 100,000.00 1,000,000.00 10,000,000.00 Electric Field [(V/m)^2] Page 7 of 10 This page has been reviewed for content and attested to on Page 2 of this document.

NCL Calibration Laboratories Division of APREL Laboratories. Video Bandwidth Probe Frequency Characteristics 1 0 -1 -2 -3 -4 -5 -6 1 10 100 1000 10000 Frequency (Hz) Video Bandwidth at 500 Hz 1 dB Video Bandwidth at 1.02 KHz: 3 dB Page 8 of 10 This page has been reviewed for content and attested to on Page 2 of this document.

NCL Calibration Laboratories Division of APREL Laboratories. Conversion Factor Uncertainty Assessment Frequency: 835MHz Epsilon: 56.1 (+/-5%) Sigma: 0.95 S/m (+/-10%) ConvF Channel X: 6.8 7%(K=2) Channel Y: 6.8 7%(K=2) Channel Z: 6.8 7%(K=2) To minimize the uncertainty calculation all tissue sensitivity values were calculated using a load impedance of 5 MΩ. Boundary Effect: For a distance of 2.4mm the evaluated uncertainty (increase in the probe sensitivity) is less than 2%. Page 9 of 10 This page has been reviewed for content and attested to on Page 2 of this document.

NCL Calibration Laboratories Division of APREL Laboratories. Test Equipment The test equipment used during Probe Calibration, manufacturer, model number and, current calibration status are listed and located on the main APREL server R:\NCL\Calibration Equipment\Instrument List May 2004. Page 10 of 10 This page has been reviewed for content and attested to on Page 2 of this document.


Document Created: 2007-07-11 15:33:23
Document Modified: 2007-07-11 15:33:23
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC