SAR 1

FCC ID: MAU024

RF Exposure Info

Download: PDF
FCCID_746184

                                 SAR Test Report

                                                       of




                                                Product Name


                            Notebook Personal Computer

                                                     Model


                                                   W130




                                                  Applied by:

                                     MITAC Technology Corporation
                                        4F, No.1, R&D Road 2,
                                         Hsinchu Science-Bas
                                            Taiwan,R. O. C.



                                             Test Performed by:

                                  International Standards Laboratory
                            No. 120, Lane 180, San Ho Tsuen, Hsin Ho Rd.
                               Lung-Tan Hsiang, Tao Yuan County 325
                                            Taiwan, R.O.C.
                                 Tel:(03)407-1718 Fax:(03)407-1738




Report Number: ISL-06LR033SAR-F                                                 Issue Date: 2006/12/05
HC LAB:NVLAP:200234-0;VCCI: R-341,C-354; NEMKO:ELA 113A;BSMI:SL2-IN-E-0037;SL2-R1-E-0037;TAF:1178; IC:IC4067
LT LAB: NVLAP:200234-0;VCCI: R-1435,C-1440;NEMKO:ELA 113B; BSMI:SL2-IN-E-0013;TAF:0997; IC:IC4164-1
ISL-T10-R4-14


                                                                    -i-


                                                          Contents of Report
1.   General .......................................................................................................................................1
  1.1      Certification of Accuracy of Test Data ............................................................................1
2. Description of Equipment Under Test (EUT)..........................................................................2
  2.1      Test Environment..............................................................................................................2
3. SAR Measurement System .......................................................................................................3
  3.1      ALSAS-10U System Description.....................................................................................3
     3.1.1      Applications ..............................................................................................................3
     3.1.2      Area Scans.................................................................................................................3
     3.1.3      Zoom Scan (Cube Scan Averaging) ........................................................................4
     3.1.4      ALSAS-10U Interpolation and Extrapolation Uncertainty....................................4
  3.2      Isotropic E-Field Probe.....................................................................................................5
     3.2.1      Isotropic E-Field Probe Specification......................................................................6
  3.3      Boundary Detection Unit and Probe Mounting Device..................................................6
  3.4      Daq-Paq (Analog to Digital Electronics).........................................................................7
  3.5      Axis Articulated Robot .....................................................................................................7
  3.6      ALSAS Universal Workstation........................................................................................8
  3.7       Universal Device Positioner ............................................................................................8
  3.8      Phantom Types..................................................................................................................9
     3.8.1      APREL Laboratories Universal Phantom ...............................................................9
4. Tissue Simulating Liquid ........................................................................................................10
  4.1      The composition of the tissue simulating liquid ...........................................................10
  4.2      Tissue Calibration Result................................................................................................10
  4.3      Tissue Dielectric Parameters for Head and Body Phantoms........................................12
5. SAR Measurement Procedure.................................................................................................13
  5.1      SAR System Validation ..................................................................................................13
     5.1.1      Validation Dipoles ..................................................................................................13
     5.1.2      Validation Result ....................................................................................................14
  5.2      Arrangement Assessment Setup.....................................................................................15
  5.2.1       Test Positions of Device Relative to Head ................................................................15
  5.2.2       Definition of the “Cheek” Position ............................................................................15
  5.2.3       Definition of the “Tilted” Position.............................................................................17
  5.2.4       Test Positions for body-worn .....................................................................................17
  5.3      SAR Measurement Procedure ........................................................................................18
6. SAR Exposure Limits..............................................................................................................19
7. Test Equipment List ................................................................................................................20
8. Measurement Uncertainty .......................................................................................................21
9. Test Result Summary ..............................................................................................................22
  9.1      CDMA2000 (835MHz) Test Result ...............................................................................22
  9.2      CDMA2000(1900MHz) Test Result..............................................................................23
10.     Appendix A: Photographs of Test Setup ...........................................................................24
11.     Appendix B: Photographs of EUT .....................................................................................24
12.     Appendix C: SAR System Validation Data.......................................................................24
13.     Appendix D: SAR measurement Data ...............................................................................24
14.     Appendix E: Probe calibration data ...................................................................................24
15.     Appendix F: Dipole calibration data ..................................................................................24




International Standards Laboratory                                                Report Number: ISL-06LR033SAR-F
HC LAB:NVLAP:200234-0;VCCI: R-341,C-354; NEMKO:ELA 113A;BSMI:SL2-IN-E-0037;SL2-R1-E-0037;TAF:1178; IC:IC4067
LT LAB: NVLAP:200234-0;VCCI: R-1435,C-1440;NEMKO:ELA 113B; BSMI:SL2-IN-E-0013;TAF:0997; IC:IC4164-1


                                                         -1-



1. General
1.1     Certification of Accuracy of Test Data

       Standards:                         FCC Oet65 Supplement C June 2001
                                          IEEE Std. 1528-2003
                                          47CFR § 2.1093
       Equipment Tested:                  Notebook Personal Computer
       Model:                             W130
       Applied by                         MITAC Technology Corporation
       Sample received Date:              2006/11/16
       Final test Date :                  refer to the date of test data
       Report Engineer:                   Ivy Yang
       Test Site:                         SAR test site
       Test Summary                       Body Maximum SAR Measurement (1g)
                                          CDMA2000 (835MHz): 0.719 W/g
                                          CDMA2000 (1900MHz): 1.395 W/g

       Test Engineer:
                                          ______________________
                                          Jerry Chiou

All the tests in this report have been performed and recorded in accordance with the standards
described above and performed by an independent test lab, International Standards Laboratory.
The test results contained in this report accurately represent the measurements of the
characteristics and the energy generated by sample equipment under test at the time of the test.
The sample equipment tested as described in this report is in compliance with the limits of above
standards.
Approve & Signature



---------------------------------------
Eddy Hsiung/Director
       Test results given in this report apply only to the specific sample(s) tested under stated test conditions.
This report shall not be reproduced other than in full without the explicit written consent of ISL. This report totally
         contains 26 pages, including 1 cover page , 1 contents page, and 24 pages for the test description.
This report must not be use to claim product endorsement by NVLAP, NIST, any agency of the federal government.




International Standards Laboratory                               Report Number: ISL-06LR033SAR-F
HC LAB:NVLAP:200234-0;VCCI: R-341,C-354; NEMKO:ELA 113A;BSMI:SL2-IN-E-0037;SL2-R1-E-0037;TAF:1178; IC:IC4067
LT LAB: NVLAP:200234-0;VCCI: R-1435,C-1440;NEMKO:ELA 113B; BSMI:SL2-IN-E-0013;TAF:0997; IC:IC4164-1


                                                       -2-



2. Description of Equipment Under Test (EUT)


 Product Name                               Notbook
 Model No.                                  W130
 ESN No.                                    602D69F3
 FCC ID:                                    MAU024
                                            CDMA800: 824 MHz ~ 849 MHz
 TX Frequency
                                            CDMA1900: 1850MHz ~ 1910Hz
                                            CDMA800: 869 MHz ~ 894 MHz
 RX Frequency
                                            CDMA1900: 1930MHz ~ 1990Hz
 Antenna Peak Gain                          Antenna:
 Max. Output Power                          CDMA 800: 23.41 dBm
 (Conducted)                                CDMA 1900: 24.3 dBm
 Power Type                                 Notebook PC Battery
 Antenna Type                               Internal
 Device Category                            Portable
 RF Exposure Environment                    Uncontrolled
 Note                                       EUT does not support voice service.



2.1     Test Environment

Ambient conditions of test site:
        Item             Required                        Actual
Temperature (°C)           18-25                          22.3
Humidity (%RH)             30-70                           49




International Standards Laboratory                             Report Number: ISL-06LR033SAR-F
HC LAB:NVLAP:200234-0;VCCI: R-341,C-354; NEMKO:ELA 113A;BSMI:SL2-IN-E-0037;SL2-R1-E-0037;CNLA:1178; IC:IC4067
LT LAB: NVLAP:200234-0;VCCI: R-1435,C-1440;NEMKO:ELA 113B; BSMI:SL2-IN-E-0013;CNLA:0997; IC:IC4164-1


                                                       -3-



3. SAR Measurement System
3.1      ALSAS-10U System Description
ALSAS-10-U is fully compliant with the
technical and scientific requirements of IEEE
1528, IEC 62209, CENELEC, ARIB, ACA, and
the Federal Communications Commission. The
system comprises of a six axes articulated robot
which utilizes a dedicated controller.

ALSAS-10U uses the latest methodologies and
FDTD odeling to provide a platform which is
repeatable with minimum uncertainty.


3.1.1 Applications
Predefined measurement procedures compliant
with the guidelines of CENELEC, IEEE, IEC,
FCC, etc are utilized during the assessment for
the device. Automatic detection for all SAR
maxima are embedded within the core
architecture for the system, ensuring that peak
locations used for centering the zoom scan are
within a 1mm resolution and a 0.05mm
repeatable position. System operation range
currently available up-to 6 GHz in simulated
tissue.


3.1.2 Area Scans
Area scans are defined prior to the measurement process being executed with a user defined
variable spacing between each measurement point (integral) allowing low uncertainty
measurements to be conducted. Scans defined for FCC applications utilize a 10mm2 step integral,
with 1mm interpolation used to locate the peak SAR area used for zoom scan assessments.

Where the system identifies multiple SAR peaks (which are within 25% of peak value) the
system will provide the user with the option of assessing each peak location individually for
zoom scan averaging.




International Standards Laboratory                             Report Number: ISL-06LR033SAR-F
HC LAB:NVLAP:200234-0;VCCI: R-341,C-354; NEMKO:ELA 113A;BSMI:SL2-IN-E-0037;SL2-R1-E-0037;CNLA:1178; IC:IC4067
LT LAB: NVLAP:200234-0;VCCI: R-1435,C-1440;NEMKO:ELA 113B; BSMI:SL2-IN-E-0013;CNLA:0997; IC:IC4164-1


                                                       -4-




3.1.3 Zoom Scan (Cube Scan Averaging)
The averaging zoom scan volume utilized in the ALSAS-10U software is in the shape of a cube
and the side dimension of a 1 g or 10 g mass is dependent on the density of the liquid
representing the simulated tissue. A density of 1000 kg/m³ is used to represent the head and body
tissue density and not the phantom liquid density, in order to be consistent with the definition of
the liquid dielectric properties, i.e. the side length of the 1 g cube is 10mm, with the side length
of the 10 g cube 21,5mm.

When the cube intersects with the surface of the phantom, it is oriented so that 3 vertices touch
the surface of the shell or the center of a face is tangent to the surface. The face of the cube
closest to the surface is modified in order to conform to the tangent surface.

The zoom scan integer steps can be user defined so as to reduce uncertainty, but normal practice
for typical test applications (including FCC) utilize a physical step of 5x5x8 (8mmx8mmx5mm)
providing a volume of 32mm in the X & Y axis, and 35mm in the Z axis.


3.1.4 ALSAS-10U Interpolation and Extrapolation Uncertainty
The overall uncertainty for the methodology and algorithms the used during the SAR calculation
was evaluated using the data from IEEE 1528 based on the example f3 algorithm:




International Standards Laboratory                             Report Number: ISL-06LR033SAR-F
HC LAB:NVLAP:200234-0;VCCI: R-341,C-354; NEMKO:ELA 113A;BSMI:SL2-IN-E-0037;SL2-R1-E-0037;CNLA:1178; IC:IC4067
LT LAB: NVLAP:200234-0;VCCI: R-1435,C-1440;NEMKO:ELA 113B; BSMI:SL2-IN-E-0013;CNLA:0997; IC:IC4164-1


                                                       -5-




3.2      Isotropic E-Field Probe
The isotropic E-Field probe has been fully calibrated and assessed for isotropicity, and boundary
effect within a controlled environment. Depending on the frequency for which the probe is
calibrated the method utilized for calibration will change. A number of methods is used for
calibrating probes, and these are outlined in the table below:

   Calibration Frequency            Air Calibration          Tissue Calibration
   835MHz                           TEM Cell                 Temperature
   900MHz                           TEM Cell                 Temperature
   1800MHz                          TEM Cell                 Temperature
   1900MHz                          TEM Cell                 Temperature
   2450MHz                          Waveguide                Temperature
   5200MHz                          Waveguide                Temperature
   5800MHz                          Waveguide                Temperature

The E-Field probe utilizes a triangular sensor arrangement as detailed in the diagram below:




SAR is assessed with a calibrated probe which moves at a default height of 5mm from the center
of the diode, which is mounted to the sensor, to the phantom surface (in the Z Axis). The 5mm
offset height has been selected so as to minimize any resultant boundary effect due to the probe
being in close proximity to the phantom surface.

The following algorithm is an example of the function used by the system for linearization of the
output from the probe when measuring complex modulation schemes.




International Standards Laboratory                             Report Number: ISL-06LR033SAR-F
HC LAB:NVLAP:200234-0;VCCI: R-341,C-354; NEMKO:ELA 113A;BSMI:SL2-IN-E-0037;SL2-R1-E-0037;CNLA:1178; IC:IC4067
LT LAB: NVLAP:200234-0;VCCI: R-1435,C-1440;NEMKO:ELA 113B; BSMI:SL2-IN-E-0013;CNLA:0997; IC:IC4164-1


                                                       -6-



3.2.1   Isotropic E-Field Probe Specification

 Calibration in Air                    Frequency Dependent
                                       Below 2GHz Calibration in air performed in a TEM Cell
                                       Above 2GHz Calibration in air performed in waveguide
 Sensitivity                           0.70 µV/(V/m)² to 0.85 µV/(V/m)²
 Dynamic Range                         0.0005 W/kg to 100W/kg
 Isotropic Response                    Better than 0.2dB
 Diode Compression point               Calibration for Specific Frequency
 (DCP)
 Probe Tip Radius                      < 5mm
 Sensor Offset                         1.56 (+/- 0.02mm)
 Probe Length                          290mm
 Video Bandwidth                       @ 500 Hz: 1dB
                                       @1.02 KHz: 3dB
 Boundary Effect                       Less than 2% for distance greater than 2.4mm
 Spatial Resolution                    Diameter less than 5mm Compliant with Standards


3.3      Boundary Detection Unit and Probe Mounting Device
ALSAS-10U incorporates a boundary detection unit with a sensitivity of 0.05mm for detecting
all types of surfaces. The robust design allows for detection during probe tilt (probe normalize)
exercises, and utilizes a second stage emergency stop. The signal electronics are fed directly into
the robot controller for high accuracy surface detection in lateral and axial detection modes (X, Y,
& Z).

The probe is mounted directly onto the Boundary Detection unit for accurate tooling and
displacement calculations controlled by the robot kinematics. The probe is connect to an isolated
probe interconnect where the output stage of the probe is fed directly into the amplifier stage of
the Daq-Paq.




International Standards Laboratory                             Report Number: ISL-06LR033SAR-F
HC LAB:NVLAP:200234-0;VCCI: R-341,C-354; NEMKO:ELA 113A;BSMI:SL2-IN-E-0037;SL2-R1-E-0037;CNLA:1178; IC:IC4067
LT LAB: NVLAP:200234-0;VCCI: R-1435,C-1440;NEMKO:ELA 113B; BSMI:SL2-IN-E-0013;CNLA:0997; IC:IC4164-1


                                                       -7-



3.4      Daq-Paq (Analog to Digital Electronics)
 ALSAS-10U incorporates a fully calibrated Daq-Paq (analog to digital conversion system)
 which has a 4 channel input stage, sent via a 2 stage auto-set amplifier module. The input
 signal is amplified accordingly so as to offer a dynamic range from 5µV to 800mV.
 Integration of the fields measured is carried out at board level utilizing a Co-Processor which
 then sends the measured fields down into the main computational module in digitized form
 via an RS232 communications port. Probe linearity and duty cycle compensation is carried
 out within the main Daq-Paq module.

 ADC                                            12 Bit
 Amplifier Range                                20mV to 200mV and 150mV to 800mV
 Field Integration                              Local Co-Processor utilizing proprietary integration
                                                algorithms
 Number of Input Channels                       4 in total 3 dedicated and 1 spare
 Communication                                  Packet data via RS232


3.5     Axis Articulated Robot
                                              ALSAS-10U utilizes a six axis articulated robot, which is
                                              controlled using a Pentium based real-time movement
                                              controller. The movement kinematics engine utilizes
                                              proprietary (Thermo CRS) interpolation and
                                              extrapolation algorithms, which allow full freedom of
                                              movement for each of the six joints within the working
                                              envelope. Utilization of joint 6 allows for full probe
                                              rotation with a tolerance better than 0.05mm around the
                                              central axis.




  Robot/Controller Manufacturer                               Thermo CRS
  Number of Axis                                              Six independently controlled axis
  Positioning Repeatability                                   0.05mm
  Controller Type                                             Single phase Pentium based C500C
  Robot Reach                                                 710mm
  Communication                                               RS232 and LAN compatible




International Standards Laboratory                             Report Number: ISL-06LR033SAR-F
HC LAB:NVLAP:200234-0;VCCI: R-341,C-354; NEMKO:ELA 113A;BSMI:SL2-IN-E-0037;SL2-R1-E-0037;CNLA:1178; IC:IC4067
LT LAB: NVLAP:200234-0;VCCI: R-1435,C-1440;NEMKO:ELA 113B; BSMI:SL2-IN-E-0013;CNLA:0997; IC:IC4164-1


                                                       -8-



3.6     ALSAS Universal Workstation
 ALSAS Universal workstation allows for repeatability and fast adaptability. It allows users to
 do calibration, testing and measurements using different types of phantoms with one set up,
 which significantly speeds up the measurement process.


3.7      Universal Device Positioner
 The universal device positioner allows complete
 freedom of movement of the EUT. Developed to
 hold a EUT in a free-space scenario any
 additional loading attributable to the material
 used in the construction of the positioner has
 been eliminated. Repeatability has been
 enhanced through the linear scales which form
 the design used to indicate positioning for any
 given test scenario in all major axes. A 15° tilt
 indicator is included for the of aid cheek to tilt
 movements for head SAR analysis. Overall
 uncertainty for measurements have been reduced
 due to the design of the Universal device
 positioner, which allows positioning of a device
 in as near to a free-space scenario as possible,
 and by providing the means for complete
 repeatability.




International Standards Laboratory                             Report Number: ISL-06LR033SAR-F
HC LAB:NVLAP:200234-0;VCCI: R-341,C-354; NEMKO:ELA 113A;BSMI:SL2-IN-E-0037;SL2-R1-E-0037;CNLA:1178; IC:IC4067
LT LAB: NVLAP:200234-0;VCCI: R-1435,C-1440;NEMKO:ELA 113B; BSMI:SL2-IN-E-0013;CNLA:0997; IC:IC4164-1


                                                       -9-



3.8      Phantom Types
 The ALSAS-10U allows the integration of multiple phantom types. SAM Phantoms fully compliant
 with IEEE 1528, Universal Phantom, and Universal Flat.

 APREL SAM Phantoms
 The SAM phantoms developed using the IEEE SAM CAD file. They are fully compliant with
 the requirements for both IEEE 1528 and FCC Supplement C. Both the left and right SAM
 phantoms are interchangeable, transparent and include the IEEE 1528 grid with visible NF
 and MB lines.




3.8.1 APREL Laboratories Universal Phantom
The Universal Phantom is used on the ALSAS-10U as a
system validation phantom.The Universal Phantom has
been fully validated both experimentally from 800MHz
to 6GHz and numerically using XFDTD numerical
software. The shell thickness is 2mm overall, with a
4mm spacer located at the NF/MB intersection providing
an overall thickness of 6mm in line with the requirements
of IEEE-1528.

The design allows for fast and accurate measurements, of
handsets, by allowing the conservative SAR to be
evaluated at on frequency for both left and right head
experiments in one measurement.




International Standards Laboratory                             Report Number: ISL-06LR033SAR-F
HC LAB:NVLAP:200234-0;VCCI: R-341,C-354; NEMKO:ELA 113A;BSMI:SL2-IN-E-0037;SL2-R1-E-0037;CNLA:1178; IC:IC4067
LT LAB: NVLAP:200234-0;VCCI: R-1435,C-1440;NEMKO:ELA 113B; BSMI:SL2-IN-E-0013;CNLA:0997; IC:IC4164-1


                                                      - 10 -



4. Tissue Simulating Liquid
4.1      The composition of the tissue simulating liquid

NGREDIENT                        835MHz                835MHz               1900MHz               1900MHz
(% Weight)                       Head                  Body                 Head                  Body
Water                            40.45                 52.40                54.90                 40.5
Salt                             1.45                  1.400                0.18                  0.50
Sugar                            57.60                 45.00                0.00                  58.0
HEC                              0.40                  1.00                 0.00                  0.50
Preventol                        0.10                  0.10                 0.00                  0.50
DGBE                             0.00                  0.00                 44.92                 0.00


4.2      Tissue Calibration Result
The dielectric parameters of the liquids were verified prior to the SAR evaluation using
Agilent Dielectric Probe Kit and Agilent E5071B Vector Network Analyzer


Head Tissue Simulant Measurement
 Frequency                                               Dielectric Parameters                     Tissue Temp.
                       Description
   [MHz]                                               εr                     σ [s/m]                  [°C]
                     Reference result                41.5                      0.9
                                                                                                        N/A
  835MHz              ± 5% window               39.42 to 43.57             0.85 to 0.94
                       23-Nov-2006                    43.31                     0.98                    22.2

Body Tissue Simulant Measurement
 Frequency            Description/                       Dielectric Parameters                     Tissue Temp.
   [MHz]             Calibration date                  εr                     σ [s/m]                  [°C]
                     Reference result                55.2                      0.97
                                                                                                        N/A
  835MHz              ± 5% window               52.44 to 57.96             0.92 to 1.02
                       23-Nov-2006                    55.12                     0.96                    22.2




International Standards Laboratory                             Report Number: ISL-06LR033SAR-F
HC LAB:NVLAP:200234-0;VCCI: R-341,C-354; NEMKO:ELA 113A;BSMI:SL2-IN-E-0037;SL2-R1-E-0037;CNLA:1178; IC:IC4067
LT LAB: NVLAP:200234-0;VCCI: R-1435,C-1440;NEMKO:ELA 113B; BSMI:SL2-IN-E-0013;CNLA:0997; IC:IC4164-1


                                                      - 11 -




Head Tissue Simulant Measurement
 Frequency                                               Dielectric Parameters                     Tissue Temp.
                       Description
   [MHz]                                               εr                     σ [s/m]                  [°C]
                     Reference result                 40.0                     1.4
                                                                                                        N/A
  1900MHz             ± 5% window                   38 to 42               1.33 to 1.47
                       23-Nov-2006                    40.35                     1.38                    22.2

Body Tissue Simulant Measurement
 Frequency            Description/                       Dielectric Parameters                     Tissue Temp.
   [MHz]             Calibration date                  εr                     σ [s/m]                  [°C]
                     Reference result                53.3                     1.52
                                                                                                        N/A
  1900MHz             ± 5% window              50.065 to 55.335         1.8525 to 2.0475
                       23-Nov-2006                    53.67                     1.51                    22.2




International Standards Laboratory                             Report Number: ISL-06LR033SAR-F
HC LAB:NVLAP:200234-0;VCCI: R-341,C-354; NEMKO:ELA 113A;BSMI:SL2-IN-E-0037;SL2-R1-E-0037;CNLA:1178; IC:IC4067
LT LAB: NVLAP:200234-0;VCCI: R-1435,C-1440;NEMKO:ELA 113B; BSMI:SL2-IN-E-0013;CNLA:0997; IC:IC4164-1


                                                      - 12 -



4.3      Tissue Dielectric Parameters for Head and Body Phantoms

The head tissue dielectric parameters recommended by the IEEE SCC-34/SC-2 in P1528 have
been incorporated in the following table. These head parameters are derived from planar layer
models simulating the highest expected SAR for the dielectric properties and tissue thickness
variations in a human head. Other head and body tissue parameters that have not been specified
in P1528 are derived from the tissue dielectric parameters computed from the 4-Cole-Cole
equations described in Reference [12] and extrapolated according to the head parameters
specified in P1528.

      Target Frequency                            Head                                      Body
            (MHz)                          εr               σ (S/m)                 εr               σ (S/m)
             150                         52.3                  0.76               61.9                 0.80
             300                         45.3                  0.87               58.2                 0.92
             450                         43.5                  0.87               56.7                 0.94
             835                         41.5                  0.90               55.2                  0.97
             900                         41.5                  0.97               55.0                 1.05
             915                         41.5                  0.98               55.0                 1.06
             1450                        40.5                  1.20               54.0                 1.30
             1610                        40.3                  1.29               53.8                 1.40
        1800 – 2000                      40.0                  1.40               53.3                 1.52
             2450                        39.2                  1.80               52.7                 1.95
             3000                        38.5                  2.40               52.0                 2.73
             5800                        35.3                  5.27               48.2                 6.00

                    (εr = relative permittivity, σ = conductivity and ρ = 1000 kg/m3)




International Standards Laboratory                             Report Number: ISL-06LR033SAR-F
HC LAB:NVLAP:200234-0;VCCI: R-341,C-354; NEMKO:ELA 113A;BSMI:SL2-IN-E-0037;SL2-R1-E-0037;CNLA:1178; IC:IC4067
LT LAB: NVLAP:200234-0;VCCI: R-1435,C-1440;NEMKO:ELA 113B; BSMI:SL2-IN-E-0013;CNLA:0997; IC:IC4164-1


                                                      - 13 -




5. SAR Measurement Procedure
5.1     SAR System Validation
5.1.1   Validation Dipoles

                                                     The dipoles used is based on the IEEE-1528
                                                     standard, and is complied with mechanical and
                                                     electrical specifications in line with the
                                                     requirements of both IEEE and FCC Supplement C.
                                                     the table below provides details for the mechanical
                                                     and electrical specifications for the dipoles.




   *   Frequency          L (mm)      h (mm)                   d (mm)
   V   835MHz             161.0       89.8                     3.6
       900MHz             149.0       83.3                     3.6
       1800MHz            72.0        41.7                     3.6
  V    1900MHz            68.0        39.5                     3.6
       2450MHz            51.5        30.4                     3.6
       5200MHz            23.6        14.0                     3.6
       5800MHz            21.6        12.6                     3.6
 *Note: “V” indicates Frequency used of EUT




International Standards Laboratory                             Report Number: ISL-06LR033SAR-F
HC LAB:NVLAP:200234-0;VCCI: R-341,C-354; NEMKO:ELA 113A;BSMI:SL2-IN-E-0037;SL2-R1-E-0037;CNLA:1178; IC:IC4067
LT LAB: NVLAP:200234-0;VCCI: R-1435,C-1440;NEMKO:ELA 113B; BSMI:SL2-IN-E-0013;CNLA:0997; IC:IC4164-1


                                                      - 14 -




5.1.2   Validation Result

System Performance Check at 835MHz
Validation Kit: ASL-D-835-S-2
 Frequency                                       SAR [w/kg]                SAR [w/kg]             Tissue Temp.
                       Description
   [MHz]                                            1g                        10g                     [°C]
                     Reference result                 9.5                      6.2
                                                                                                        N/A
  835 MHz             ± 5% window                8.55 to 10.45             5.58 to 6.84
                       23-Nov-2006                    9.431                    5.681                    22.2
Note: All SAR values are 1W forward power.

System Performance Check at 1900MHz
Validation Kit: ASL-D-1900-S-2
 Frequency                                       SAR [w/kg]                SAR [w/kg]             Tissue Temp.
                       Description
   [MHz]                                            1g                        10g                     [°C]
                     Reference result                39.7                      20.5
                                                                                                        N/A
 1900 MHz             ± 5% window               35.73 to 43.67            18.45 to 22.55
                       23-Nov-2006                   38.711                   19.179                    22.2
Note: All SAR values are 1W forward power.




International Standards Laboratory                             Report Number: ISL-06LR033SAR-F
HC LAB:NVLAP:200234-0;VCCI: R-341,C-354; NEMKO:ELA 113A;BSMI:SL2-IN-E-0037;SL2-R1-E-0037;CNLA:1178; IC:IC4067
LT LAB: NVLAP:200234-0;VCCI: R-1435,C-1440;NEMKO:ELA 113B; BSMI:SL2-IN-E-0013;CNLA:0997; IC:IC4164-1


                                                      - 15 -




5.2     Arrangement Assessment Setup
5.2.1   Test Positions of Device Relative to Head
This specifies exactly two test positions for the handset against the head phantom, the “cheek”
position and the “tilted” position. The handset should be tested in both positions on the left and
right sides of the SAM phantom. If the handset construction is such that it cannot be positioned
using the handset positioning procedures described in 4.2.2.1 and 4.2.2.2 to represent normal use
conditions (e.g., asymmetric handset), alternative alignment procedures should be considered
with details provided in the test report.




         Figure 4.1a Fixed Case                           Figure4.1b Clam Shell

5.2.2    Definition of the “Cheek” Position
The “cheek” position is defined as follows:
a. Ready the handset for talk operation, if necessary. For example, for handsets with a cover
   piece, open the cover. (If the handset can also be used with the cover closed both
   configurations must be tested.)
b. Define two imaginary lines on the handset: the vertical centerline and the horizontal line. The
   vertical centerline passes through two points on the front side of the handset: the midpoint of
   the width wt of the handset at the level of the acoustic output (point A on Figures 4.1a and
   4.1b), and the midpoint of the width wb of the bottom of the handset (point B). The horizontal
   line is perpendicular to the vertical centerline and passes through the center of the acoustic
   output (see Figure 4.1a). The two lines intersect at point A. Note that for many handsets, point
   A coincides with the center of the acoustic output. However, the acoustic output may be
   located elsewhere on the horizontal line. Also note that the vertical centerline is not
   necessarily parallel to the front face of the handset (see Figure 4.1b), especially for clamshell
   handsets, handsets with flip pieces, and other irregularly-shaped handsets.




International Standards Laboratory                             Report Number: ISL-06LR033SAR-F
HC LAB:NVLAP:200234-0;VCCI: R-341,C-354; NEMKO:ELA 113A;BSMI:SL2-IN-E-0037;SL2-R1-E-0037;CNLA:1178; IC:IC4067
LT LAB: NVLAP:200234-0;VCCI: R-1435,C-1440;NEMKO:ELA 113B; BSMI:SL2-IN-E-0013;CNLA:0997; IC:IC4164-1


                                                      - 16 -


c. Position the handset close to the surface of the phantom such that point A is on the (virtual)
   extension of the line passing through points RE and LE on the phantom (see Figure 4.2), such
   that the plane defined by the vertical center line and the horizontal line of the handset is
   approximately parallel to the sagittal plane of the phantom.
d. Translate the handset towards the phantom along the line passing through RE and LE until the
   handset touches the pinna.
e. While maintaining the handset in this plane, rotate it around the LE-RE line until the vertical
   centerline is in the plane normal to MB-NF including the line MB (called the reference plane).
f. Rotate the handset around the vertical centerline until the handset (horizontal line) is
   symmetrical with respect to the line NF.
g. While maintaining the vertical centerline in the reference plane, keeping point A on the line
   passing through RE and LE and maintaining the handset contact with the pinna, rotate the
   handset about the line NF until any point on the handset is in contact with a phantom point
   below the pinna (cheek). See Figure 4.2 the physical angles of rotation should be noted.




                       Figure 4.2 – Phone position 1, “cheek” or “touch” position.




International Standards Laboratory                             Report Number: ISL-06LR033SAR-F
HC LAB:NVLAP:200234-0;VCCI: R-341,C-354; NEMKO:ELA 113A;BSMI:SL2-IN-E-0037;SL2-R1-E-0037;CNLA:1178; IC:IC4067
LT LAB: NVLAP:200234-0;VCCI: R-1435,C-1440;NEMKO:ELA 113B; BSMI:SL2-IN-E-0013;CNLA:0997; IC:IC4164-1


                                                      - 17 -



5.2.3   Definition of the “Tilted” Position
The “tilted” position is defined as follows:
a. Repeat steps (a) – (g) of 4.2.1.1 to place the device in the “cheek position.”
b. While maintaining the orientation of the handset move the handset away from the pinna along
   the line passing through RE and LE in order to enable a rotation of the handset by 15 degrees.
c. Rotate the handset around the horizontal line by 15 degrees.
d. While maintaining the orientation of the handset, move the handset towards the phantom on a
   line passing through RE and LE until any part of the handset touches the ear. The tilted
   position is obtained when the contact is on the pinna. If the contact is at any location other
   than the pinna (e.g., the antenna with the back of the phantom head), the angle of the handset
   should be reduced. In this case, the tilted position is obtained if any part of the handset is in
   contact with the pinna as well as a second part of the handset is contact with the phantom (e.g.,
   the antenna with the back of the head).




                                Figure 4.3 – Phone position 2, “tilted” position.
5.2.4    Test Positions for body-worn
Body-worn operating configurations should be tested with the belt-clips and holsters attached to
the device and positioned against a flat phantom in normal use configurations. A separation
distance of 1.5 cm between the back of the device and a flat phantom is recommended for testing
body-worn SAR compliance under such circumstances. Other separation distance may be use,
but not exceed 2.5 cm.




International Standards Laboratory                             Report Number: ISL-06LR033SAR-F
HC LAB:NVLAP:200234-0;VCCI: R-341,C-354; NEMKO:ELA 113A;BSMI:SL2-IN-E-0037;SL2-R1-E-0037;CNLA:1178; IC:IC4067
LT LAB: NVLAP:200234-0;VCCI: R-1435,C-1440;NEMKO:ELA 113B; BSMI:SL2-IN-E-0013;CNLA:0997; IC:IC4164-1


                                                      - 18 -



5.3      SAR Measurement Procedure
The ALSAS-10U calculates SAR using the following equation,



                 s: represents the simulated tissue conductivity
                 ?: represents the tissue density

The EUT is set to transmit at the required power in line with product specification, at each
frequency relating to the LOW, MID, and HIGH channel settings.

Pre-scans are made on the device to establish the location for the transmitting antenna, using a
large area scan in either air or tissue simulation fluid.

The EUT is placed against the Universal Phantom where the maximum area scan dimensions are
larger than the physical size of the resonating antenna. When the scan size is not large enough to
cover the peak SAR distribution, it is modified by either extending the area scan size in both the
X and Y directions, or the device is shifted within the predefined area.

The area scan is then run to establish the peak SAR location (interpolated resolution set at 1mm² )
which is then used to orient the center of the zoom scan. The zoom scan is then executed and the
1g and 10g averages are derived from the zoom scan volume (interpolated resolution set at
1mm³).




International Standards Laboratory                             Report Number: ISL-06LR033SAR-F
HC LAB:NVLAP:200234-0;VCCI: R-341,C-354; NEMKO:ELA 113A;BSMI:SL2-IN-E-0037;SL2-R1-E-0037;CNLA:1178; IC:IC4067
LT LAB: NVLAP:200234-0;VCCI: R-1435,C-1440;NEMKO:ELA 113B; BSMI:SL2-IN-E-0013;CNLA:0997; IC:IC4164-1


                                                      - 19 -



6. SAR Exposure Limits
SAR assessments have been made in line with the requirements of IEEE-1528, FCC Supplement
C, and comply with ANSI/IEEE C95.1-1992 “Uncontrolled Environments” limits. These limits
apply to a location which is deemed as “Uncontrolled Environment” which can be described as a
situation where the general public may be exposed to an RF source with no prior knowledge or
control over their exposure.

        Limits for General Population/Uncontrolled Exposure (W/kg)
                    Type Exposure                             Uncontrolled Environment Limit
Spatial Peak SAR (1g cube tissue for brain or body)           1.60 W/kg

Spatial Average SAR (whole body)                                            0.08 W/kg

Spatial Peak SAR (10g for hands, feet, ankles and wrist)                    4.00 W/kg




International Standards Laboratory                             Report Number: ISL-06LR033SAR-F
HC LAB:NVLAP:200234-0;VCCI: R-341,C-354; NEMKO:ELA 113A;BSMI:SL2-IN-E-0037;SL2-R1-E-0037;CNLA:1178; IC:IC4067
LT LAB: NVLAP:200234-0;VCCI: R-1435,C-1440;NEMKO:ELA 113B; BSMI:SL2-IN-E-0013;CNLA:0997; IC:IC4164-1


                                                      - 20 -



7. Test Equipment List
              Instrument               Manufacturer            Model No.           Serial No.    Last
                                                                                                 Calibration
  Vector Network Analyzer              Agilent          E5071B                 MY42402726         Jul. 2007
  Dielectric Probe Kit                 Aglient          85070E                 MY44300124         N/A
  Signal Generator                     Anritsu          MG3692A                020311             Feb. 2007
  Power Meter                          Agilent          438A                   3513U06187         Feb. 2007
  Power Sensor                         Agilent          84815A                 3318A01828         Feb. 2007
  Data Acquisition Package             Aprel            ALS-DAQ-PAQ-2          110-00203          Mar. 2007
  Aprel Laboratories Probe             Aprel            ALS-E020               266                Mar. 2007
  Aprel Reference Dipole               Aprel            ALS-D-835-S-2          180-00553          Mar. 2005
  835MHz
  Aprel Reference Dipole               Aprel            ALS-D-1900-S-2         210-00703          Mar. 2005
  1900MHz
  Aprel Reference Dipole               Aprel            ALS-D-2450-S-2         220-00753          Mar. 2005
  2450MHz
  Aprel Reference Dipole               Aprel            ALS-D-5200-S-2         230-00802          Mar. 2005
  5200MHz
  Aprel Reference Dipole               Aprel            ALS-D-5800-S-2         240-00852          Mar. 2005
  5800MHz
  Boundary Detection                   Aprel            ALS-PMDPS-2            120-00253          N/A
  SensorSystem
  Universal Work Station               Aprel            ALS-UWS                100-00153          N/A
  Device Holder 2.0                    Aprel            ALS-H-E-SET-2          170-00503          N/A
  Left Ear SAM Phantom                 Aprel            ALS-P-SAM-L            130-00305          N/A
  Right Ear SAM Phantom                Aprel            ALS-P-SAM-R            140-00355          N/A
  Universal Phantom                    Aprel            ALS-P-UP-1             150-00405          N/A
  Aprel Dipole Spacer                  Aprel            ALS-DS-U               250-00903          N/A
  SAR Software                         Aprel            ALSAS-10U              B0D5F-112FE        N/A
                                                        Ver.2.2.0
  CRS C500C Controller                 Thermo           ALS-C500               RCF0440278         N/A
  CRF F3 Robot                         Thermo           ALS-F3                 RAF0440252         N/A
  Power Amplifier                      Mini-Circuit     ZVE-8G                 D030305            N/A
  Vector Network Analyzer              Agilent          E5071B                 MY42402726         Jul. 2007
  Dielectric Probe Kit                 Aglient          85070E                 MY44300124         N/A
  Signal Generator                     Anritsu          MG3692A                020311             Feb. 2007
  Power Meter                          Agilent          438A                   3513U06187         Feb. 2007
  Power Sensor                         Agilent          84815A                 3318A01828         Feb. 2007


Note: All equipment upon which need to be calibrated are with calibration period of 1 year
      except Reference Dipole is to be calibrated every two years. .




International Standards Laboratory                              Report Number: ISL-06LR033SAR-F
HC LAB:NVLAP:200234-0;VCCI: R-341,C-354; NEMKO:ELA 113A;BSMI:SL2-IN-E-0037;SL2-R1-E-0037;CNLA:1178; IC:IC4067
LT LAB: NVLAP:200234-0;VCCI: R-1435,C-1440;NEMKO:ELA 113B; BSMI:SL2-IN-E-0013;CNLA:0997; IC:IC4164-1


                                                       - 21 -




8. Measurement Uncertainty
                   Exposure Assessment Measurement Uncertainty
                                                                                             Standard     Standard
Source of                   Tolerance Probability                       ci1        ci1       Uncer-       Uncer-
                                                            Divisor
Uncertainty                 Value     Distribution                      (1g)       (10g)     tainty       tainty
                                                                                             (1-g) %      (10g) %
Measurement System
Probe Calibration           3.5          normal             1           1          1         3.5          3.5
                                                                        (1-        (1-
Axial Isotropy              3.7          rectangular        v3          cp)1/2     cp)1/2    1.5          1.5
Hemispherical
Isotropy                    10.9         rectangular        v3          vcp        vcp       4.4          4.4
Boundary Effect             1.0          rectangular        v3          1          1         0.6          0.6
Linearity                   4.7          rectangular        v3          1          1         2.7          2.7
Detection Limit             1.0          rectangular        v3          1          1         0.6          0.6
Readout Electronics         1.0          normal             1           1          1         1.0          1.0
Response Time               0.8          rectangular        v3          1          1         0.5          0.5
Integration Time            1.7          rectangular        v3          1          1         1.0          1.0
RF Ambient Condition        3.0          rectangular        v3          1          1         1.7          1.7
Probe Positioner
Mech.                       0.4          rectangular        v3          1          1         0.2          0.2
Restriction
Probe Positioning with
respect to Phantom
Shell                       2.9          rectangular        v3          1          1         1.7          1.7
Extrapolation and
Integration                 3.7          rectangular        v3          1          1         2.1          2.1
Test             Sample
Positioning                 4.0          normal             1           1          1         4.0          4.0
Device           Holder
Uncertainty                 2.0          normal             1           1          1         2.0          2.0
Drift of Output Power       1.6          rectangular        v3          1          1         0.9          0.9
Phantom and Setup
Phantom Uncertainty
(shape & thickness
tolerance)                  3.4          rectangular        v3          1          1         2.0          2.0
Liquid Conductivity
(target)                    5.0          rectangular        v3          0.7        0.5       2.0          1.4
Liquid
Conductivity(meas.)         4.6          normal             1           0.7        0.5       3.2          2.3
Liquid
Permittivity(target)        5.0          rectangular        v3          0.6        0.5       1.7          1.4
Liquid
Permittivity(meas.)         2.3          normal             1           0.6        0.5       1.4          1.1
Combined Uncertainty                     RSS                                                 9.9          9.5
Combined Uncertainty
(coverage factor=2)                      Normal(k=2)                                         19.8         18.9




International Standards Laboratory                               Report Number: ISL-06LR033SAR-F
HC LAB:NVLAP:200234-0;VCCI: R-341,C-354; NEMKO:ELA 113A;BSMI:SL2-IN-E-0037;SL2-R1-E-0037;CNLA:1178; IC:IC4067
LT LAB: NVLAP:200234-0;VCCI: R-1435,C-1440;NEMKO:ELA 113B; BSMI:SL2-IN-E-0013;CNLA:0997; IC:IC4164-1


                                                        - 22 -



9. Test Result Summary
9.1      CDMA2000 (835MHz) Test Result
SAR Measurement
Ambient Temperature (°C) : 22.3 ±1                         Relative Humidity (%): 49
Liquid Temperature (°C) : 22.2±1                           Depth of Liquid (cm):>15
Test Mode : CDMA2000_FTAP ( 835MHz )
    Test                             Frequency              Conducted
                 Antenna                                                    SAR 1g          Limit
Position of                                                  power
                  Type          Channel         MHz                         (W/Kg)         (W/Kg)
    EUT                                                      (dBm)
    Side         Internal         Low          824.73          --              --             --
      Side       Internal         Mid           836.4            23.34       0.311           1.6
      Side       Internal         High         848.19             --           --             --
Test Mode : CDMA2000_RTAP ( 835MHz )
      Side       Internal         Low          824.73            23.59        0.719          1.6
      Side       Internal         Mid          836.4             23.36        0.344          1.6
      Side       Internal         High         848.19            23.39        0.571          1.6
    Back         Internal         Low          824.73            23.59        0.425          1.6
    Back         Internal         Mid          836.4             23.36        0.498          1.6
    Back         Internal         High         848.19            23.39        0.268          1.6
Note: The SAR measured at the middle channel for this configuration is at least 3 dB lower than SAR
limit, testing at the high and low channels is option.




International Standards Laboratory                               Report Number: ISL-06LR033SAR-F
HC LAB:NVLAP:200234-0;VCCI: R-341,C-354; NEMKO:ELA 113A;BSMI:SL2-IN-E-0037;SL2-R1-E-0037;CNLA:1178; IC:IC4067
LT LAB: NVLAP:200234-0;VCCI: R-1435,C-1440;NEMKO:ELA 113B; BSMI:SL2-IN-E-0013;CNLA:0997; IC:IC4164-1


                                                      - 23 -



9.2      CDMA2000(1900MHz) Test Result
SAR Measurement
Ambient Temperature (°C) : 22.3 ±1                        Relative Humidity (%): 49
Liquid Temperature (°C) : 22.2±1                          Depth of Liquid (cm):>15
Test Mode : CDMA2000_FTAP( 1900MHz )
    Test                             Frequency             Conducted
                 Antenna                                                     SAR 1g         Limit
Position of                                                 power
                  Type          Channel         MHz                          (W/Kg)        (W/Kg)
    EUT                                                     (dBm)
    Side         Internal         Low         1851.25         --                --            --
      Side       Internal         Mid         1880.0           24.31          1.262           1.6
      Side       Internal         High        1908.75           --              --            --
Test Mode : CDMA2000_RTAP( 1900MHz )
      Side       Internal         Low         1851.25          23.81          1.135           1.6
      Side       Internal         Mid         1880.0           24.68          1.395           1.6
      Side       Internal         High        1908.75          23.91          1.003           1.6
    Back         Internal         Low         1851.25          23.81          1.336           1.6
    Back         Internal         Mid         1880.0           24.68           1.33           1.6
    Back         Internal         High        1908.75          23.91          1.334           1.6
Note: The SAR measured at the middle channel for this configuration is at least 3 dB lower than SAR
limit, testing at the high and low channels is option.




International Standards Laboratory                             Report Number: ISL-06LR033SAR-F
HC LAB:NVLAP:200234-0;VCCI: R-341,C-354; NEMKO:ELA 113A;BSMI:SL2-IN-E-0037;SL2-R1-E-0037;CNLA:1178; IC:IC4067
LT LAB: NVLAP:200234-0;VCCI: R-1435,C-1440;NEMKO:ELA 113B; BSMI:SL2-IN-E-0013;CNLA:0997; IC:IC4164-1


                                                      - 24 -



10. Appendix A: Photographs of Test Setup
11. Appendix B: Photographs of EUT
12. Appendix C: SAR System Validation Data
13. Appendix D: SAR measurement Data
14. Appendix E: Probe calibration data
15. Appendix F: Dipole calibration data




International Standards Laboratory                             Report Number: ISL-06LR033SAR-F
HC LAB:NVLAP:200234-0;VCCI: R-341,C-354; NEMKO:ELA 113A;BSMI:SL2-IN-E-0037;SL2-R1-E-0037;CNLA:1178; IC:IC4067
LT LAB: NVLAP:200234-0;VCCI: R-1435,C-1440;NEMKO:ELA 113B; BSMI:SL2-IN-E-0013;CNLA:0997; IC:IC4164-1



Document Created: 2006-12-07 18:21:46
Document Modified: 2006-12-07 18:21:46

© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC