reply letter

FCC ID: MAU023

Cover Letter(s)

Download: PDF
FCCID_840153

Applicant: Mitac Technology Corp. FCC ID: MAU023 Form 731 Confirmation Number: 1)EA199369, 2)EA745133, 3)EA193419, 4)EA818843 Date of Original E-Mail: 09/05/2007 Correspondence Reference Number: 1)33714, 2)33715, 3)33717, 4)33719 Dear Mr. Andrew Leimer, Here are our answers, 1) External photos exhibit has "EUT-1", "EUT-2", "EUT-3", "EUT-4" - please explain differences between these models / versions, and explain test results included in this filing if any intended to account for different versions and how. Ans: There are 2 configurations for this EUT. The difference from the exterior is the size of LCD. Configuration 1 is 10.4 inches, and 12.1 inches for Configuration 2. The photo of "EUT-1"and "EUT-4" are for configuration 1, and "EUT-2" and "EUT-3" are for configuration 2. All types of LCD、DDR with related components have been tested, only shown the worst data using the configuration 2 in the test report. Test configurations: confi Adapter Modem Wireless gurati LCD CPU Hard Disk Battery DDR Type Card LAN Card on Toshiba Genuine EPS (Model: Toshiba Conexant Intel MITAC Hnnix (Model: intel F10903-A) (Model:M (Model: (Model:W (Model:B (Model: 1 LTD104 U2500 K1234GS RD-02-D3 M3945AB P-LC2600 PC2-53 KA1S) 1.2GHz X) 120G 30) G) /33-0151) 00S555- 12) Toshiba Genuine EPS (Model: Toshiba Conexant Intel MITAC Hnnix (Model: intel F10903-A) (Model:M (Model: (Model:W (Model:B (Model: 2 LTD121 U2500 K1234GS RD-02-D3 M3945AB P-LC2600 PC2-53 EXEV) 1.2GHz X) 120G 30) G) /33-0151) 00S555- 12) 2) Preliminary user manual has SAR values listed for 802.11abg modes - please submit if updated manual or manual excerpts are available considering WWAN operations. Ans: Please refer to page 117 of the updated manual for SAR value.

3) At least SAR report, for example, mentions other FCC IDs for WWAN and WLAN transmitter components - fyi please note the present FCC ID applies only for combination of WWAN, WLAN, BT in specific final-product, and is not valid if any of these are not installed or are exchanged for any other similar transmitter components. In other words, separate FCC IDs for WWAN, WLAN etc are not valid in this case where transmitters are used as components in specific final-product FCC ID. Ans: Thanks a lot for your kindly instruction. 4) If not in filing already, please provide details about how transmissions are disabled for certain tablet-mode screen orientations, as part of confidential op. desc. exhibits if preferred. Ans: Please refer to the operation description exhibit- V100 Firmware.pdf Please review Best Regards Daphne Liu/ISL


Document Created: 2019-11-03 12:04:41
Document Modified: 2019-11-03 12:04:41
© 2025 FCC.report
This site is not affiliated with or endorsed by the FCC