SAR 9

FCC ID: MAU020

RF Exposure Info

Download: PDF
FCCID_739064

NCL CALIBRATION LABORATORIES Calboration File No: DC—500 Project Number: WISB—ALSAS 100—5121 CERTIFICATE OF CALIBRATION 1 is cerifed ht e equipment identti below has been caltrand in ho wer cauismamion LaBoratoriesty quaifed nenomnafotowing recognied procedues and using vanstrsandarts racealeto NRCNUST iss vaidaton De Mandactiec APREL tabortores Patnunbec Arsoass52 Frequency as ks senatno:eas—1s0.c08s3 Custemec wiso Caltraies 3"March 208 Released on: 3° March 2005 wardu omins T romen Creon Reice rix enmnee

NCL Calibration Laboratories Divison of APREL Laborionics Conditions Dipole 835—160—00553 was new and taken from stock priorto calibration. Ambient Temperature of the Laboratory: 22°C +/—0.5°C Temperature of the Tissue: 21 °C +—0.5°C We the undersigned aftest that to the best of our knowledge the calibration of this device has been accurately conducted and that information contained within this report has been reviewed for accuracy. Stuart Nicol Director Product Do onPeonceins. D. Brooks Memberof Engincering Staff (Calibration Engineer) "This page has been reviewad for content and atested o by signature witin hi document

NCL Calibration Laboratories Divison of APREL Laborones Calibration Results Summary The following results relate the Calibrated Dipole and should be used as a quick reference for the user. Mechanical Dimensions 161.0 mm 80.8 mm Electrical Specification swa: 1020 Return Loss: —30.6 0B impedance: 4060 Systom V ion Results Frequency 1 Gram 10 Gram Peak [835 MHz EKS 6.1 1a21 Area Scan ¥ As (mn) oi0 omm ronfoninnioet mss 1ase az0 axe rass o x is inn) fuu) savx sn se 10 aso arze 27e n 0 100« ame ame Fakt mue olsc mcn c ¥ Ais o This page has been reviewad or content and atosted to by signature witin this document

NCL Calibration Laboratories Divison of APREL Latorabns Introduction This Calibration Report has been produced in line with the SSI Dipole Calibration Procedure SS1—TP—018—ALSAS. The results contained within this report are for Validation Dipole 835—180—00553. The calibration routine consisted of a three—step process. Step 1 was a mechanical verification of the dipole to ensure that it meets the mechanical specifications. Step 2 was an Electrical Calibration for the Validation Dipole, where the SWR, Impedance, and the Retum loss were assessed. Step 3 involved a System Validation using the ALSAS—10U, along with APREL £—020 130 MHz to 26 GHz E—Field Probe Serial Number 212. References SST—TP—018—ALSAS Dipole Calibration Procedure SST—TP—016 Tissue Callbration Procedure IEEE 1528 ‘Recommended Practice for Determining the Peak Spatial—Average Specific Absorplion Rate (SAR) in the Human Body Due to Wireiess Communications Devices: Experimental Techniques" Conditions Dipole 835—180—00563 was new taken from stock. Ambient Temperature of the Laboratory: 22°C +/—0.5°C Temperature of the Tissue: 20 °C +/—0.5°C This page has been roviewed for contnt and atosted io by signature witin this document.

NCL Calibration Laboratories Divison ofAPREL Labormonic. Dipole Calibration Results Mechanical Vorification APREL APREL Measured Measured Length Height Length Height 161.0 mm 80.8 mm 162.1 mm 89.8 mm Tissue Validation Head Tissue 835MHz Measured Dielectric constant, & 415 Conductivity, o [Sim] o.0 This page has been reviewad fr content and atested o by signature witin hidocument

NCL Calibration Laboratories Divison of APREL Laboratanes. Electrical Callbration Test Resurt s1 RC 30 .6 48 swr |~~4ozu impedance 406 n The Following Graphs are the results as displayed on the Vector Network Analyzer. 11 Parameter Roturn Loss see revense reFlecrion cu 4 — 52e Rerenente rume uos montruve »ner 8.0000 us nanken 1 a.034250 Oe jocs —39.569 08 narken to mex namcer o hi »nanken resoout a.7sa500 oie e.e99500 runcrions This page has been reviewed fr content and atlsted t by signature witin this document

NCL Calibration Laboratories Divinon of APREL Labonters: SWR see reverse nervecrion i4 — s# fererence ruae sun »ner=1.200 U 200.000 at/O1y 80000 m nnken 1 a.e34250 oi 1or0 U faan . j : maken to nex mnker To wIN i »manken resoour a.7sa5e0 Sie e.e995e0 runcrions This page has beon reviewed fr contot and atosted o by signature witin this document

NCL Calibration Laboratories Divison of APREL Latorons Smith Chart Dipole Impedance sez nevense nervecion i mneeomce 8423E nerenence ruaE 8.0000 ue wonken 1 eco34250 on 19.506 0 s20.252. jog wanker to wex nanker to ntn »narken nesoout a.7sa5e0 — e.o90500 one FAnes 008 This page has been reviewed for contnt and atosted to by signature witinthis document

NCL Calibration Laboratories Divinon of APREL Labonters System Validation Results Using the Electrically Calibrated Dipole Head Tissue 1 Gram 10Gram Poak Frequency Above reet Pn |_ 835 MHz 949 6.1 14.21 Area Scan Y Ais o) o 102B 10 —10 230 axe rass o x as (mm) (wad m x sn sn 4g50 3720 2796 1e ame ome 6 4 4 40% ¥ Axis grm) This page has been reviewed fr contont and atosted o by signature witin this document

NCL Calibration Laboratorics Divison of APREL Laborates. Test Equipment The test equipment used during Probe Calibration, manufacturer, model number and, current calibration status are listed and located on the main APREL server RANCL\Calibration EquipmentlinstrumentList May 2004 10 "This page has been reviewed for content and atlsted t by signature witin this document


Document Created: 2006-11-23 16:42:06
Document Modified: 2006-11-23 16:42:06
© 2025 FCC.report
This site is not affiliated with or endorsed by the FCC