ATCB comments 2

FCC ID: MAU020

Cover Letter(s)

Download: PDF
FCCID_739011

HI Daphne
Please address the following issues:
1     Please note that as per item 6 of the original comments, please
provide the parts list for the module.
2     Please remove the shields from the module and provide internal photos
showing component location etc.
3     if the parts list is to be confidential - please revise the request
letter to include the parts list.
4     Please note that in your response to Bill's comments about SAR you
stated that the device antenna is closer than 20cm from the body and thus
SAR had to be done (see item 3 original comments response). Please note
that the manual specifically states that the device antenna must be more
than 20 cm from the body (see pages 127 and 128 of the A790 manual). If as
stated in your reply, the device antenna is closer than 20cm thus requiring
SAR, please remove the minimul 20cm statement and correct the manual to
properly address portable use. While specific SAR values may not be needed
(even though recommended) you must still properly address the correct rf
exposure environment.
5     Please explain why the epsilon and sigma dielectric body references
for the probe (sn 266) in the SAR report, page 12, do not match the
calibrated values (i.e. cal data says 55.2 and 1.05 while the SAR report
says 55.2 and 0.97). Please correct if necessary.

Thanks

Dennis Ward
Evaluation Engineer
American TCB
Certification Resource for the Wireless Industry www.atcb.com
703-847-4700 fax 703-847-6888
direct - 703-880-4841
cell - 209-769-8316
NOTICE: This E-Mail message and any attachment may contain privileged or
company proprietary information. If you received this message in error,
please return to the sender.


-----Original Message-----
From: Dward ATCB [mailto:dward@atcb.com]
Sent: 12/11/2006 11:36 AM
To: 'daphne_liu@isl.com.tw'; 'whgraff@atcb.com'
Cc: 'major@atcb.com'; 'jerry@atcb.com'; 'jimmy_wang@isl.com.tw'
Subject: RE: www.AmericanTCB.com ATCB004280 | MAU020 | | | MAU020_ATCB004280

Also, when providing the parts list for the licensed transmitter, unless
specifically stated in the confidentiality request, it will not be
confidential.

Thanks

Dennis Ward
Evaluation Engineer
American TCB
Certification Resource for the Wireless Industry www.atcb.com
703-847-4700 fax 703-847-6888
direct - 703-880-4841
cell - 209-769-8316


NOTICE: This E-Mail message and any attachment may contain privileged or
company proprietary information. If you received this message in error,
please return to the sender.


-----Original Message-----
From: Dward ATCB [mailto:dward@atcb.com]
Sent: 12/11/2006 11:32 AM
To: 'daphne_liu@isl.com.tw'; 'whgraff@atcb.com'
Cc: 'major@atcb.com'; 'jerry@atcb.com'; 'jimmy_wang@isl.com.tw'
Subject: RE: www.AmericanTCB.com ATCB004280 | MAU020 | | | MAU020_ATCB004280

HI Daphne
Please note that while you have provided the tune up procedure, you have not
provided the parts list. Please provide the required parts list for the
licensed device.
Thanks

Dennis Ward
Evaluation Engineer
American TCB
Certification Resource for the Wireless Industry www.atcb.com
703-847-4700 fax 703-847-6888
direct - 703-880-4841
cell - 209-769-8316
NOTICE: This E-Mail message and any attachment may contain privileged or
company proprietary information. If you received this message in error,
please return to the sender.



Document Created: 2006-12-11 12:30:02
Document Modified: 2006-12-11 12:30:02

© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC