Test Report(DTS-BT LE)_rev

FCC ID: M82-ZENOCCU000

Test Report

Download: PDF
FCCID_4136138

FCC Test Report Report No.: RF180912C10-4 FCC ID: M82-ZENOCCU000 Test Model: ZenoCCU Received Date: Aug. 28, 2018 Test Date: Nov. 06 ~ Nov. 22, 2018 Issued Date: Nov. 27, 2018 Applicant: ADVANTECH CO., LTD Address: No. 1, Alley 20, Lane 26, Rueiguang Road, Neihu District, Taipei, Taiwan 114 Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Lab Address: No. 47-2, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan (R.O.C.) Test Location: No. 19, Hwa Ya 2nd Rd., Wen Hwa Vil., Kwei Shan Dist., Taoyuan City 33383, TAIWAN (R.O.C.) FCC Registration / 788550 / TW0003 Designation Number: This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. This report should not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. Report No.: RF180912C10-4 Page No. 1 / 34 Report Format Version: 6.1.1

Table of Contents Release Control Record .................................................................................................................................. 4 1 Certificate of Conformity...................................................................................................................... 5 2 Summary of Test Results ..................................................................................................................... 6 2.1 Measurement Uncertainty ................................................................................................................... 6 2.2 Modification Record ............................................................................................................................ 6 3 General Information .............................................................................................................................. 7 3.1 General Description of EUT ................................................................................................................ 7 3.2 Description of Test Modes ................................................................................................................... 8 3.2.1 Test Mode Applicability and Tested Channel Detail............................................................................. 9 3.3 Duty Cycle of Test Signal .................................................................................................................. 10 3.4 Description of Support Units .............................................................................................................. 11 3.4.1 Configuration of System under Test ................................................................................................... 11 3.5 General Description of Applied Standards ......................................................................................... 11 4 Test Types and Results ...................................................................................................................... 12 4.1 Radiated Emission and Bandedge Measurement............................................................................. 12 4.1.1 Limits of Radiated Emission and Bandedge Measurement .............................................................. 12 4.1.2 Test Instruments ................................................................................................................................ 13 4.1.3 Test Procedures................................................................................................................................. 14 4.1.4 Deviation from Test Standard ............................................................................................................ 15 4.1.5 Test Setup .......................................................................................................................................... 15 4.1.6 EUT Operating Conditions................................................................................................................. 16 4.1.7 Test Results ....................................................................................................................................... 17 4.2 Conducted Emission Measurement .................................................................................................. 22 4.2.1 Limits of Conducted Emission Measurement .................................................................................... 22 4.2.2 Test Instruments ................................................................................................................................ 22 4.2.3 Test Procedures................................................................................................................................. 23 4.2.4 Deviation from Test Standard ............................................................................................................ 23 4.2.5 Test Setup .......................................................................................................................................... 23 4.2.6 EUT Operating Conditions................................................................................................................. 23 4.2.7 Test Results ....................................................................................................................................... 24 4.3 6dB Bandwidth Measurement ........................................................................................................... 26 4.3.1 Limits of 6dB Bandwidth Measurement ............................................................................................. 26 4.3.2 Test Setup .......................................................................................................................................... 26 4.3.3 Test Instruments ................................................................................................................................ 26 4.3.4 Test Procedure .................................................................................................................................. 26 4.3.5 Deviation fromTest Standard ............................................................................................................. 26 4.3.6 EUT Operating Conditions................................................................................................................. 26 4.3.7 Test Result ......................................................................................................................................... 27 4.4 Conducted Output Power Measurement........................................................................................... 28 4.4.1 Limits of Conducted Output Power Measurement ............................................................................ 28 4.4.2 Test Setup .......................................................................................................................................... 28 4.4.3 Test Instruments ................................................................................................................................ 28 4.4.4 Test Procedures................................................................................................................................. 28 4.4.5 Deviation from Test Standard ............................................................................................................ 28 4.4.6 EUT Operating Conditions................................................................................................................. 28 4.4.7 Test Results ....................................................................................................................................... 28 4.5 Power Spectral Density Measurement .............................................................................................. 29 4.5.1 Limits of Power Spectral Density Measurement ............................................................................... 29 4.5.2 Test Setup .......................................................................................................................................... 29 4.5.3 Test Instruments ................................................................................................................................ 29 4.5.4 Test Procedure .................................................................................................................................. 29 4.5.5 Deviation from Test Standard ............................................................................................................ 29 4.5.6 EUT Operating Condition .................................................................................................................. 29 Report No.: RF180912C10-4 Page No. 2 / 34 Report Format Version: 6.1.1

4.5.7 Test Results ....................................................................................................................................... 30 4.6 Conducted Out of Band Emission Measurement .............................................................................. 31 4.6.1 Limits of Conducted Out of Band Emission Measurement ............................................................... 31 4.6.2 Test Setup .......................................................................................................................................... 31 4.6.3 Test Instruments ................................................................................................................................ 31 4.6.4 Test Procedure .................................................................................................................................. 31 4.6.5 Deviation from Test Standard ............................................................................................................ 31 4.6.6 EUT Operating Condition .................................................................................................................. 31 4.6.7 Test Results ....................................................................................................................................... 31 5 Pictures of Test Arrangements .......................................................................................................... 33 Appendix – Information on the Testing Laboratories ................................................................................ 34 Report No.: RF180912C10-4 Page No. 3 / 34 Report Format Version: 6.1.1

Release Control Record Issue No. Description Date Issued RF180912C10-4 Original release Nov. 27, 2018 Report No.: RF180912C10-4 Page No. 4 / 34 Report Format Version: 6.1.1

1 Certificate of Conformity Product: IPC Brand: Zenoway Test Model: ZenoCCU Sample Status: Engineering Sample Applicant: ADVANTECH CO., LTD Test Date: Nov. 06 ~ Nov. 22, 2018 Standards: 47 CFR FCC Part 15, Subpart C (Section 15.247) ANSI C63.10:2013 The above equipment has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s RF characteristics under the conditions specified in this report. Prepared by : , Date: Nov. 27, 2018 Pettie Chen / Senior Specialist Approved by : , Date: Nov. 27, 2018 Bruce Chen / Project Engineer Report No.: RF180912C10-4 Page No. 5 / 34 Report Format Version: 6.1.1

2 Summary of Test Results 47 CFR FCC Part 15, Subpart C (Section 15.247) FCC Test Item Result Remarks Clause Meet the requirement of limit. 15.207 AC Power Conducted Emission Pass Minimum passing margin is -12.90dB at 0.18316MHz 15.205 / Meet the requirement of limit. Radiated Emissions and Band Edge 15.209 / Pass Minimum passing margin is -2.2dB at Measurement 15.247(d) 62.95MHz. 15.247(d) Antenna Port Emission Pass Meet the requirement of limit. 15.247(a)(2) 6dB bandwidth Pass Meet the requirement of limit. 15.247(b) Conducted power Pass Meet the requirement of limit. 15.247(e) Power Spectral Density Pass Meet the requirement of limit. Antenna connector is RP-SMA(M) not 15.203 Antenna Requirement Pass a standard connector. 2.1 Measurement Uncertainty Where relevant, the following measurement uncertainty levels have been estimated for tests performed on the EUT as specified in CISPR 16-4-2: Expanded Uncertainty Measurement Frequency (k=2) (±) Conducted Emissions at mains ports 150kHz ~ 30MHz 2.94 dB 30MHz ~ 200MHz 3.86 dB Radiated Emissions up to 1 GHz 200MHz ~1000MHz 3.87 dB 1GHz ~ 18GHz 2.29 dB Radiated Emissions above 1 GHz 18GHz ~ 40GHz 2.29 dB 2.2 Modification Record There were no modifications required for compliance. Report No.: RF180912C10-4 Page No. 6 / 34 Report Format Version: 6.1.1

3 General Information 3.1 General Description of EUT Product IPC Brand Zenoway Test Model ZenoCCU Sample Status Engineering Sample Power Supply Rating 9-60Vdc Modulation Type GFSK Transfer Rate 1Mbps Operating Frequency 2402~2480MHz Number of Channel 40 Channel Spacing 2MHz Output Power 1.660mW Antenna Type Refer to Note Antenna Connector Refer to Note Accessory Device Antenna Cable Supplied NA Note: 1. The EUT uses following antenna. Antenna 1 Type Monopole Connector RP-SMA(M) Straight position Frequency (MHz) 2400 2450 2500 5150 5350 5750 5850 Gain (dBi) 1.04 1.25 0.82 0.85 1.38 0.28 1.04 Bent position 90° Frequency (MHz) 2400 2450 2500 5150 5350 5750 5850 Gain (dBi) 1.19 1.57 2.57 0.66 1.03 0.59 1.19 Antenna 2 Type Monopole Connector SMA Male Reverse Frequency (MHz) 2400~2500 5150~5850 Gain (dBi) 1.64 -2.9 * The antenna 1 (Bent position) is the worst case for final tests. 2. The computing device complies with Part 15 class A rules and SDoC report is issued separately. Report No.: RF180912C10-4 Page No. 7 / 34 Report Format Version: 6.1.1

3.2 Description of Test Modes 40 channels are provided for EUT: Channel Freq. (MHz) Channel Freq. (MHz) Channel Freq. (MHz) Channel Freq. (MHz) 0 2402 10 2422 20 2442 30 2462 1 2404 11 2424 21 2444 31 2464 2 2406 12 2426 22 2446 32 2466 3 2408 13 2428 23 2448 33 2468 4 2410 14 2430 24 2450 34 2470 5 2412 15 2432 25 2452 35 2472 6 2414 16 2434 26 2454 36 2474 7 2416 17 2436 27 2456 37 2476 8 2418 18 2438 28 2458 38 2478 9 2420 19 2440 29 2460 39 2480 Report No.: RF180912C10-4 Page No. 8 / 34 Report Format Version: 6.1.1

3.2.1 Test Mode Applicability and Tested Channel Detail EUT Configure Applicable to Description Mode RE1G RE<1G PLC APCM - √ √ √ √ - Where RE1G: Radiated Emission above 1GHz & Bandedge RE<1G: Radiated Emission below 1GHz Measurement PLC: Power Line Conducted Emission APCM: Antenna Port Conducted Measurement Note: 1. The EUT had been pre-tested on the positioned of each 3 axis. The worst case was found when positioned on X-plane. Radiated Emission Test (Above 1GHz): Pre-Scan has been conducted to determine the worst-case mode from all possible combinations between available modulations, data rates and antenna ports (if EUT with antenna diversity architecture). Following channel(s) was (were) selected for the final test as listed below. EUT Configure Modulation Available Channel Tested Channel Data Rate (Mbps) Remark Mode Technology - 0 to 39 0, 19, 39 GFSK 1 - Radiated Emission Test (Below 1GHz): Pre-Scan has been conducted to determine the worst-case mode from all possible combinations between available modulations, data rates and antenna ports (if EUT with antenna diversity architecture). Following channel(s) was (were) selected for the final test as listed below. EUT Configure Modulation Available Channel Tested Channel Data Rate (Mbps) Remark Mode Technology - 0 to 39 39 GFSK 1 - Power Line Conducted Emission Test: Pre-Scan has been conducted to determine the worst-case mode from all possible combinations between available modulations, data rates and antenna ports (if EUT with antenna diversity architecture). Following channel(s) was (were) selected for the final test as listed below. EUT Configure Modulation Available Channel Tested Channel Data Rate (Mbps) Remark Mode Technology - 0 to 39 39 GFSK 1 - Antenna Port Conducted Measurement: This item includes all test value of each mode, but only includes spectrum plot of worst value of each mode. Pre-Scan has been conducted to determine the worst-case mode from all possible combinations between available modulations, data rates and antenna ports (if EUT with antenna diversity architecture). Following channel(s) was (were) selected for the final test as listed below. EUT Configure Modulation Available Channel Tested Channel Data Rate (Mbps) Remark Mode Technology - 0 to 39 0, 19, 39 GFSK 1 - Report No.: RF180912C10-4 Page No. 9 / 34 Report Format Version: 6.1.1

Test Condition: Applicable to Environmental Conditions Input Power (system) Tested by RE1G 24deg. C, 66%RH 120Vac, 60Hz Adair Peng RE<1G 24deg. C, 66%RH 120Vac, 60Hz Adair Peng PLC 25deg. C, 66%RH 120Vac, 60Hz Willy Cheng APCM 25deg. C, 60%RH 120Vac, 60Hz Frank Liu 3.3 Duty Cycle of Test Signal Duty cycle of test signal is < 98%, duty factor is required. Duty cycle = 0.382/0.637 = 0.60, Duty factor = 10 * log(1/0.60) = 2.22 Report No.: RF180912C10-4 Page No. 10 / 34 Report Format Version: 6.1.1

3.4 Description of Support Units The EUT has been tested as an independent unit together with other necessary accessories or support units. The following support units or accessories were used to form a representative test configuration during the tests. ID Product Brand Model No. Serial No. FCC ID Remarks A. Monitor ViewSonic VX2457-MHD UG0182942330 FCC DoC Approved - B. Mouse DELL MS111-P CN-011D3V-71581-1CJ-0936 FCC DoC Approved - C. Keyboard DELL RT7D50 CN-0J4624-37172-44T-000M FCC DoC Approved - D. DC Power Supply Topward 33010D 807748 NA - E. Load NA NA NA NA - Note: 1. All power cords of the above support units are non-shielded (1.8m). Shielding ID Descriptions Qty. Length (m) Cores (Qty.) Remarks (Yes/No) 1. Display cable 1 1.6 N 0 - 2. USB cable 1 1.6 Y 0 - 3. USB cable 1 1.6 Y 0 - 4. Power cable 1 1.0 N 0 - 5. RJ45 cable 3 1.6 N 0 - 3.4.1 Configuration of System under Test Monitor (A) (1) EUT (2) Mouse (B) DC Power Supply (D) (4) Load (E) (5) (3) Keyboard (C) 3.5 General Description of Applied Standards The EUT is a RF Product. According to the specifications of the manufacturer, it must comply with the requirements of the following standards: FCC Part 15, Subpart C (15.247) KDB 558074 D01 15.247 Meas Guidance v05 ANSI C63.10:2013 All test items have been performed and recorded as per the above standards. Report No.: RF180912C10-4 Page No. 11 / 34 Report Format Version: 6.1.1

4 Test Types and Results 4.1 Radiated Emission and Bandedge Measurement 4.1.1 Limits of Radiated Emission and Bandedge Measurement Radiated emissions which fall in the restricted bands must comply with the radiated emission limits specified as below table. Other emissions shall be at least 20dB below the highest level of the desired power: Frequencies Field Strength Measurement Distance (MHz) (microvolts/meter) (meters) 0.009 ~ 0.490 2400/F(kHz) 300 0.490 ~ 1.705 24000/F(kHz) 30 1.705 ~ 30.0 30 30 30 ~ 88 100 3 88 ~ 216 150 3 216 ~ 960 200 3 Above 960 500 3 Note: 1. The lower limit shall apply at the transition frequencies. 2. Emission level (dBuV/m) = 20 log Emission level (uV/m). 3. For frequencies above 1000MHz, the field strength limits are based on average detector, however, the peak field strength of any emission shall not exceed the maximum permitted average limits, specified above by more than 20dB under any condition of modulation. Report No.: RF180912C10-4 Page No. 12 / 34 Report Format Version: 6.1.1

4.1.2 Test Instruments Description & Manufacturer Model No. Serial No. Cal. Date Cal. Due Test Receiver ESIB7 100187 May 29, 2018 May 28, 2019 ROHDE & SCHWARZ Spectrum Analyzer FSP40 100041 Dec. 12, 2017 Dec. 11, 2018 ROHDE & SCHWARZ BILOG Antenna VULB9168 9168-171 Dec. 11, 2017 Dec. 10, 2018 SCHWARZBECK HORN Antenna 9120D 209 Dec. 13, 2017 Dec. 12, 2018 SCHWARZBECK HORN Antenna BBHA 9170 BBHA9170241 Dec. 01, 2017 Nov. 30, 2018 SCHWARZBECK Loop Antenna EM-6879 269 Sep. 07, 2018 Sep. 06, 2019 EMCI Preamplifier EMC001340 980201 Jan. 23, 2018 Jan. 22, 2019 Loop Preamplifier Agilent 8447D 2944A10738 Aug. 21, 2018 Aug. 20, 2019 (Below 1GHz) Preamplifier Agilent 8449B 3008A02465 Apr. 03, 2018 Apr. 02, 2019 (Above 1GHz) RF signal cable Cable-CH3-03 SUCOFLEX 104 Aug. 21, 2018 Aug. 20, 2019 HUBER+SUHNER (223653/4) RF signal cable SUCOFLEX Cable-CH3-03 HUBER+SUHNER& 104&EMC104-SM-S Aug. 21, 2018 Aug. 20, 2019 (309224+170907) EMCI M-8000 RF signal cable 8D-FB Cable-CH3-01 Aug. 21, 2018 Aug. 20, 2019 WOKEN Software ADT_Radiated_ NA NA NA BV ADT V7.6.15.9.5 Antenna Tower MA 4000 013303 NA NA inn-co GmbH Antenna Tower Controller AT100 AT93021702 NA NA BV ADT Turn Table TT100 TT93021702 NA NA BV ADT Turn Table Controller SC100 SC93021702 NA NA BV ADT Boresight Antenna Fixture FBA-01 FBA-SIP01 NA NA MY55050005/MY5519 USB Wideband Power Meter U2021XA 0004/MY55190007/MY Jul. 17, 2018 Jul. 16, 2019 KEYSIGHT 55210005 Note: 1. The calibration interval of the above test instruments is 12 months and the calibrations are traceable to NML/ROC and NIST/USA. 2. The test was performed in HwaYa Chamber 3. 3. The horn antenna and preamplifier (model: 8449B) are used only for the measurement of emission frequency above 1GHz if tested. 4. The FCC Designation Number is TW0003. The number will be varied with the Lab location and scope as attached. 5. The IC Site Registration No. is IC 7450F-3. Report No.: RF180912C10-4 Page No. 13 / 34 Report Format Version: 6.1.1

4.1.3 Test Procedures For Radiated emission below 30MHz a. The EUT was placed on the top of a rotating table 0.8 meters above the ground at a 3 meter chamber room. The table was rotated 360 degrees to determine the position of the highest radiation. b. The EUT was set 3 meters away from the interference-receiving antenna, which was mounted on the top of a variable-height antenna tower. c. Parallel, perpendicular, and ground-parallel orientations of the antenna are set to make the measurement. d. For each suspected emission, the EUT was arranged to its worst case and the rotatable table was turned from 0 degrees to 360 degrees to find the maximum reading. e. The test-receiver system was set to Quasi-Peak Detect Function and Specified Bandwidth with Maximum Hold Mode. Note: 1. The resolution bandwidth and video bandwidth of test receiver/spectrum analyzer is 9kHz at frequency below 30MHz. For Radiated emission above 30MHz a. The EUT was placed on the top of a rotating table 0.8 meters (for 30MHz ~ 1GHz) / 1.5 meters (for above 1GHz) above the ground at 3 meter chamber room for test. The table was rotated 360 degrees to determine the position of the highest radiation. b. The EUT was set 3 meters away from the interference-receiving antenna, which was mounted on the top of a variable-height antenna tower. c. The height of antenna is varied from one meter to four meters above the ground to determine the maximum value of the field strength. Both horizontal and vertical polarizations of the antenna are set to make the measurement. d. For each suspected emission, the EUT was arranged to its worst case and then the antenna was tuned to heights from 1 meter to 4 meters and the rotatable table was turned from 0 degrees to 360 degrees to find the maximum reading. e. The test-receiver system was set to quasi-peak detect function and specified bandwidth with maximum hold mode when the test frequency is below 1 GHz. f. The test-receiver system was set to peak and average detect function and specified bandwidth with maximum hold mode when the test frequency is above 1 GHz. If the peak reading value also meets average limit, measurement with the average detector is unnecessary. Note: 1. The resolution bandwidth and video bandwidth of test receiver/spectrum analyzer is 120kHz for Quasi-peak detection (QP) at frequency below 1GHz. 2. The resolution bandwidth of test receiver/spectrum analyzer is 1 MHz and the video bandwidth is 3 MHz for Peak detection (PK) at frequency above 1GHz. 3. The resolution bandwidth of test receiver/spectrum analyzer is 1MHz and the video bandwidth is ≥ 1/T (Duty cycle < 98%) or 10Hz (Duty cycle ≥ 98%) for Average detection (AV) at frequency above 1GHz. 4. All modes of operation were investigated and the worst-case emissions are reported. Report No.: RF180912C10-4 Page No. 14 / 34 Report Format Version: 6.1.1

4.1.4 Deviation from Test Standard No deviation. 4.1.5 Test Setup For Radiated emission below 30MHz 1m EUT& 3m Support Units Turn Table 80cm Ground Plane Test Receiver For Radiated emission 30MHz to 1GHz Ant. Tower 1-4m Variable 3m 10m EUT& Support Units Turn Table 80cm Ground Plane Test Receiver Report No.: RF180912C10-4 Page No. 15 / 34 Report Format Version: 6.1.1

For Radiated emission above 1GHz Ant. Tower 1-4m Variable EUT& 3m Support Units Turn Table Absorber 150cm Ground Plane Test Receiver For the actual test configuration, please refer to the attached file (Test Setup Photo). 4.1.6 EUT Operating Conditions a. Set the EUT under transmission condition continuously at specific channel frequency. Report No.: RF180912C10-4 Page No. 16 / 34 Report Format Version: 6.1.1

4.1.7 Test Results Above 1GHz data: CHANNEL TX Channel 0 DETECTOR Peak (PK) FREQUENCY RANGE 1GHz ~ 25GHz FUNCTION Average (AV) ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M EMISSION ANTENNA TABLE RAW CORRECTION FREQ. LIMIT MARGIN NO. LEVEL HEIGHT ANGLE VALUE FACTOR (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 2390.00 59.4 PK 74.0 -14.6 2.11 H 43 26.4 33.0 2 2390.00 48.0 AV 54.0 -6.0 2.11 H 43 15.0 33.0 3 *2402.00 92.3 PK 2.16 H 38 59.4 32.9 4 *2402.00 90.8 AV 2.16 H 38 57.9 32.9 5 4804.00 45.6 PK 74.0 -28.4 1.53 H 31 42.1 3.5 6 4804.00 33.8 AV 54.0 -20.2 1.53 H 31 30.3 3.5 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M EMISSION ANTENNA TABLE RAW CORRECTION FREQ. LIMIT MARGIN NO. LEVEL HEIGHT ANGLE VALUE FACTOR (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 2390.00 59.5 PK 74.0 -14.5 2.57 V 183 26.5 33.0 2 2390.00 47.7 AV 54.0 -6.3 2.57 V 183 14.7 33.0 3 *2402.00 88.9 PK 2.67 V 179 56.0 32.9 4 *2402.00 87.4 AV 2.67 V 179 54.5 32.9 5 4804.00 45.7 PK 74.0 -28.3 1.44 V 97 42.2 3.5 6 4804.00 34.0 AV 54.0 -20.0 1.44 V 97 30.5 3.5 Remarks: 1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) – Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level – Limit value 5. " * ": Fundamental frequency. Report No.: RF180912C10-4 Page No. 17 / 34 Report Format Version: 6.1.1

CHANNEL TX Channel 19 DETECTOR Peak (PK) FREQUENCY RANGE 1GHz ~ 25GHz FUNCTION Average (AV) ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M EMISSION ANTENNA TABLE RAW CORRECTION FREQ. LIMIT MARGIN NO. LEVEL HEIGHT ANGLE VALUE FACTOR (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 *2440.00 92.3 PK 1.33 H 42 59.4 32.9 2 *2440.00 90.9 AV 1.33 H 42 58.0 32.9 3 4880.00 47.1 PK 74.0 -26.9 1.49 H 35 43.8 3.3 4 4880.00 34.4 AV 54.0 -19.6 1.49 H 35 31.1 3.3 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M EMISSION ANTENNA TABLE RAW CORRECTION FREQ. LIMIT MARGIN NO. LEVEL HEIGHT ANGLE VALUE FACTOR (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 *2440.00 89.0 PK 2.58 V 177 56.1 32.9 2 *2440.00 87.5 AV 2.58 V 177 54.6 32.9 3 4880.00 47.2 PK 74.0 -26.8 1.59 V 101 43.9 3.3 4 4880.00 34.0 AV 54.0 -20.0 1.59 V 101 30.7 3.3 Remarks: 1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) – Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level – Limit value 5. " * ": Fundamental frequency. Report No.: RF180912C10-4 Page No. 18 / 34 Report Format Version: 6.1.1

CHANNEL TX Channel 39 DETECTOR Peak (PK) FREQUENCY RANGE 1GHz ~ 25GHz FUNCTION Average (AV) ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M EMISSION ANTENNA TABLE RAW CORRECTION FREQ. LIMIT MARGIN NO. LEVEL HEIGHT ANGLE VALUE FACTOR (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 *2480.00 91.4 PK 2.09 H 41 58.7 32.7 2 *2480.00 89.9 AV 2.09 H 41 57.2 32.7 3 2483.50 59.4 PK 74.0 -14.6 2.03 H 43 26.7 32.7 4 2483.50 47.6 AV 54.0 -6.4 2.03 H 43 14.9 32.7 5 4960.00 47.1 PK 74.0 -26.9 1.49 H 29 43.7 3.4 6 4960.00 34.9 AV 54.0 -19.1 1.49 H 29 31.5 3.4 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M EMISSION ANTENNA TABLE RAW CORRECTION FREQ. LIMIT MARGIN NO. LEVEL HEIGHT ANGLE VALUE FACTOR (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 *2480.00 87.8 PK 2.52 V 178 55.1 32.7 2 *2480.00 86.3 AV 2.52 V 178 53.6 32.7 3 2483.50 59.5 PK 74.0 -14.5 2.77 V 183 26.8 32.7 4 2483.50 47.5 AV 54.0 -6.5 2.77 V 183 14.8 32.7 5 4960.00 46.8 PK 74.0 -27.2 1.51 V 78 43.4 3.4 6 4960.00 34.9 AV 54.0 -19.1 1.51 V 78 31.5 3.4 Remarks: 1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) – Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level – Limit value 5. " * ": Fundamental frequency. Report No.: RF180912C10-4 Page No. 19 / 34 Report Format Version: 6.1.1

Below 1GHz worst-case data: DETECTOR FREQUENCY RANGE 9kHz ~ 1GHz Quasi-Peak (QP) FUNCTION CHANNEL TX Channel 39 ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M EMISSION ANTENNA TABLE RAW CORRECTION FREQ. LIMIT MARGIN NO. LEVEL HEIGHT ANGLE VALUE FACTOR (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 74.62 30.2 QP 40.0 -9.8 2.00 H 235 42.4 -12.2 2 134.89 30.8 QP 43.5 -12.7 2.00 H 89 40.9 -10.1 3 214.61 40.5 QP 43.5 -3.0 1.00 H 182 52.0 -11.5 4 284.60 40.8 QP 46.0 -5.2 1.00 H 228 48.4 -7.6 5 444.03 40.1 QP 46.0 -5.9 2.00 H 114 44.4 -4.3 6 799.84 41.4 QP 46.0 -4.6 1.00 H 127 39.1 2.3 Remarks: 1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) – Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit of frequency range 30MHz~1000MHz. 4. Margin value = Emission Level – Limit value 5. The emission levels were very low against the limit of frequency range 9kHz~30MHz: the amplitude of spurious emissions attenuated more than 20dB below the permissible value to be report. Report No.: RF180912C10-4 Page No. 20 / 34 Report Format Version: 6.1.1

DETECTOR FREQUENCY RANGE 9kHz ~ 1GHz Quasi-Peak (QP) FUNCTION CHANNEL TX Channel 39 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M EMISSION ANTENNA TABLE RAW CORRECTION FREQ. LIMIT MARGIN NO. LEVEL HEIGHT ANGLE VALUE FACTOR (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 31.84 36.7 QP 40.0 -3.3 1.50 V 60 47.7 -11.0 2 62.95 37.8 QP 40.0 -2.2 1.99 V 320 47.9 -10.1 3 257.38 40.1 QP 46.0 -5.9 1.50 V 151 49.3 -9.2 4 432.37 41.9 QP 46.0 -4.1 1.00 V 117 46.4 -4.5 5 444.03 41.1 QP 46.0 -4.9 1.00 V 129 45.4 -4.3 6 799.84 37.9 QP 46.0 -8.1 1.50 V 128 35.6 2.3 Remarks: 1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) – Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit of frequency range 30MHz~1000MHz. 4. Margin value = Emission Level – Limit value 5. The emission levels were very low against the limit of frequency range 9kHz~30MHz: the amplitude of spurious emissions attenuated more than 20dB below the permissible value to be report. Report No.: RF180912C10-4 Page No. 21 / 34 Report Format Version: 6.1.1

4.2 Conducted Emission Measurement 4.2.1 Limits of Conducted Emission Measurement Conducted Limit (dBuV) Frequency (MHz) Quasi-peak Average 0.15 - 0.5 66 - 56 56 - 46 0.50 - 5.0 56 46 5.0 - 30.0 60 50 Note: 1. The lower limit shall apply at the transition frequencies. 2. The limit decreases in line with the logarithm of the frequency in the range of 0.15 to 0.50MHz. 4.2.2 Test Instruments Description & Manufacturer Model No. Serial No. Cal. Date Cal. Due Test Receiver ESR3 102412 Feb. 08, 2018 Feb. 07, 2019 ROHDE & SCHWARZ RF signal cable (with 10dB PAD) 5D-FB Cable-cond2-01 Sep. 05, 2018 Sep. 04, 2019 Woken LISN ROHDE & SCHWARZ ESH2-Z5 100100 Feb. 05, 2018 Feb. 04, 2019 (EUT) LISN ROHDE & SCHWARZ ESH3-Z5 100312 Aug. 13, 2018 Aug. 12, 2019 (Peripheral) Software BV ADT_Cond_ NA NA NA ADT V7.3.7.4 Note: 1. The calibration interval of the above test instruments is 12 months and the calibrations are traceable to NML/ROC and NIST/USA. 2. The test was performed in HwaYa Shielded Room 2. 3. The VCCI Site Registration No. is C-2047. Report No.: RF180912C10-4 Page No. 22 / 34 Report Format Version: 6.1.1

4.2.3 Test Procedures a. The EUT was placed 0.4 meters from the conducting wall of the shielded room with EUT being connected to the power mains through a line impedance stabilization network (LISN). Other support units were connected to the power mains through another LISN. The two LISNs provide 50 ohm/ 50uH of coupling impedance for the measuring instrument. b. Both lines of the power mains connected to the EUT were checked for maximum conducted interference. c. The frequency range from 150kHz to 30MHz was searched. Emission levels under (Limit - 20dB) was not recorded. Note: The resolution bandwidth and video bandwidth of test receiver is 9kHz for quasi-peak detection (QP) and average detection (AV) at frequency 0.15MHz-30MHz. 4.2.4 Deviation from Test Standard No deviation. 4.2.5 Test Setup Vertical Ground Reference Plane Test Receiver EUT 40cm 80cm LISN Horizontal Ground Reference Plane Note: 1.Support units were connected to second LISN. For the actual test configuration, please refer to the attached file (Test Setup Photo). 4.2.6 EUT Operating Conditions Same as item 4.1.6. Report No.: RF180912C10-4 Page No. 23 / 34 Report Format Version: 6.1.1

4.2.7 Test Results Worst-case data: Quasi-Peak (QP) / Phase Line (L) Detector Function Average (AV) Channel TX Channel 39 Corr. Reading Value Emission Level Limit Margin Freq. No Factor [dB (uV)] [dB (uV)] [dB (uV)] (dB) [MHz] (dB) Q.P. AV. Q.P. AV. Q.P. AV. Q.P. AV. 1 0.18316 10.06 41.38 15.13 51.44 25.19 64.34 54.34 -12.90 -29.15 2 0.59325 10.06 23.24 2.19 33.30 12.25 56.00 46.00 -22.70 -33.75 3 8.58975 10.26 14.27 8.71 24.53 18.97 60.00 50.00 -35.47 -31.03 4 14.01225 10.39 11.55 6.25 21.94 16.64 60.00 50.00 -38.06 -33.36 5 18.24225 10.48 16.37 13.10 26.85 23.58 60.00 50.00 -33.15 -26.42 6 28.50000 10.29 14.74 3.23 25.03 13.52 60.00 50.00 -34.97 -36.48 Remarks: 1. Q.P. and AV. are abbreviations of quasi-peak and average individually. 2. The emission levels of other frequencies were very low against the limit. 3. Margin value = Emission level - Limit value 4. Correction factor = Insertion loss + Cable loss 5. Emission Level = Correction Factor + Reading Value. Report No.: RF180912C10-4 Page No. 24 / 34 Report Format Version: 6.1.1

Quasi-Peak (QP) / Phase Neutral (N) Detector Function Average (AV) Channel TX Channel 39 Corr. Reading Value Emission Level Limit Margin Freq. No Factor [dB (uV)] [dB (uV)] [dB (uV)] (dB) [MHz] (dB) Q.P. AV. Q.P. AV. Q.P. AV. Q.P. AV. 1 0.15924 10.06 29.10 6.23 39.16 16.29 65.50 55.50 -26.34 -39.21 2 1.36050 10.08 6.96 1.99 17.04 12.07 56.00 46.00 -38.96 -33.93 3 8.57625 10.31 14.83 8.49 25.14 18.80 60.00 50.00 -34.86 -31.20 4 13.99875 10.49 12.27 7.42 22.76 17.91 60.00 50.00 -37.24 -32.09 5 18.24450 10.62 15.80 12.69 26.42 23.31 60.00 50.00 -33.58 -26.69 6 25.49850 10.51 12.02 2.56 22.53 13.07 60.00 50.00 -37.47 -36.93 Remarks: 1. Q.P. and AV. are abbreviations of quasi-peak and average individually. 2. The emission levels of other frequencies were very low against the limit. 3. Margin value = Emission level - Limit value 4. Correction factor = Insertion loss + Cable loss 5. Emission Level = Correction Factor + Reading Value. Report No.: RF180912C10-4 Page No. 25 / 34 Report Format Version: 6.1.1

4.3 6dB Bandwidth Measurement 4.3.1 Limits of 6dB Bandwidth Measurement The minimum of 6dB Bandwidth Measurement is 0.5 MHz. 4.3.2 Test Setup Spectrum EUT Attenuator Analyzer 4.3.3 Test Instruments Refer to section 4.1.2 to get information of above instrument. 4.3.4 Test Procedure a. Set resolution bandwidth (RBW) = 100kHz. b. Set the video bandwidth (VBW) ≥ 3 x RBW, Detector = Peak. c. Trace mode = max hold. d. Sweep = auto couple. e. Measure the maximum width of the emission that is constrained by the frequencies associated with the two amplitude points (upper and lower) that are attenuated by 6 dB relative to the maximum level measured in the fundamental emission. 4.3.5 Deviation fromTest Standard No deviation. 4.3.6 EUT Operating Conditions The software provided by client to enable the EUT under transmission condition continuously at lowest, middle and highest channel frequencies individually. Report No.: RF180912C10-4 Page No. 26 / 34 Report Format Version: 6.1.1

4.3.7 Test Result 6dB Bandwidth Minimum Limit Channel Frequency (MHz) Pass / Fail (MHz) (MHz) 0 2402 0.68 0.5 Pass 19 2440 0.68 0.5 Pass 39 2480 0.68 0.5 Pass Spectrum Plot of Worst Value Report No.: RF180912C10-4 Page No. 27 / 34 Report Format Version: 6.1.1

4.4 Conducted Output Power Measurement 4.4.1 Limits of Conducted Output Power Measurement For systems using digital modulation in the 2400–2483.5 MHz bands: 1 Watt (30dBm) 4.4.2 Test Setup EUT Power Sensor Power Meter Attenuator 4.4.3 Test Instruments Refer to section 4.1.2 to get information of above instrument. 4.4.4 Test Procedures A peak power sensor was used on the output port of the EUT. A power meter was used to read the response of the peak power sensor. Record the power level. 4.4.5 Deviation from Test Standard No deviation. 4.4.6 EUT Operating Conditions Same as item 4.3.6. 4.4.7 Test Results Channel Frequency (MHz) Peak Power (mW) Peak Power (dBm) Limit (dBm) Pass/Fail 0 2402 1.442 1.59 30 Pass 19 2440 1.611 2.07 30 Pass 39 2480 1.660 2.20 30 Pass Report No.: RF180912C10-4 Page No. 28 / 34 Report Format Version: 6.1.1

4.5 Power Spectral Density Measurement 4.5.1 Limits of Power Spectral Density Measurement The Maximum of Power Spectral Density Measurement is 8dBm in any 3 kHz. 4.5.2 Test Setup Spectrum EUT Attenuator Analyzer 4.5.3 Test Instruments Refer to section 4.1.2 to get information of above instrument. 4.5.4 Test Procedure a. Set analyzer center frequency to DTS channel center frequency. b. Set the span to 1.5 times the DTS bandwidth. c. Set the RBW to: 3 kHz ≤ RBW ≤ 100 kHz. d. Set the VBW ≥ 3 × RBW. e. Detector = peak. f. Sweep time = auto couple. g. Trace mode = max hold. h. Allow trace to fully stabilize. i. Use the peak marker function to determine the maximum amplitude level within the RBW. 4.5.5 Deviation from Test Standard No deviation. 4.5.6 EUT Operating Condition Same as item 4.3.6 Report No.: RF180912C10-4 Page No. 29 / 34 Report Format Version: 6.1.1

4.5.7 Test Results PSD Limit Channel Freq. (MHz) Pass/Fail (dBm/3kHz) (dBm/3kHz) 0 2402 -12.76 8 Pass 19 2440 -11.44 8 Pass 39 2480 -13.84 8 Pass Spectrum Plot of Worst Value Report No.: RF180912C10-4 Page No. 30 / 34 Report Format Version: 6.1.1

4.6 Conducted Out of Band Emission Measurement 4.6.1 Limits of Conducted Out of Band Emission Measurement Below -20dB of the highest emission level of operating band (in 100kHz Resolution Bandwidth). 4.6.2 Test Setup Spectrum EUT Attenuator Analyzer 4.6.3 Test Instruments Refer to section 4.1.2 to get information of above instrument. 4.6.4 Test Procedure Measurement Procedure REF a. Set the RBW = 100 kHz. b. Set the VBW ≥ 300 kHz. c. Detector = peak. d. Sweep time = auto couple. e. Trace mode = max hold. f. Allow trace to fully stabilize. g. Use the peak marker function to determine the maximum power level in any 100 kHz band segment within the fundamental EBW. Measurement Procedure OOBE a. Set RBW = 100 kHz. b. Set VBW ≥ 300 kHz. c. Detector = peak. d. Sweep = auto couple. e. Trace Mode = max hold. f. Allow trace to fully stabilize. g. Use the peak marker function to determine the maximum amplitude level. 4.6.5 Deviation from Test Standard No deviation. 4.6.6 EUT Operating Condition Same as item 4.3.6 4.6.7 Test Results The spectrum plots are attached on the following pages. D1 line indicates the highest level, and D2 line indicates the 20dB offset below D1. It shows compliance with the requirement. Report No.: RF180912C10-4 Page No. 31 / 34 Report Format Version: 6.1.1

CH 0 CH 19 CH 39 CH 0 Band edge CH 39 Band edge Report No.: RF180912C10-4 Page No. 32 / 34 Report Format Version: 6.1.1

5 Pictures of Test Arrangements Please refer to the attached file (Test Setup Photo). Report No.: RF180912C10-4 Page No. 33 / 34 Report Format Version: 6.1.1

Appendix – Information on the Testing Laboratories We, Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, were founded in 1988 to provide our best service in EMC, Radio, Telecom and Safety consultation. Our laboratories are FCC recognized accredited test firms and accredited and approved according to ISO/IEC 17025. If you have any comments, please feel free to contact us at the following: Linko EMC/RF Lab Hsin Chu EMC/RF/Telecom Lab Tel: 886-2-26052180 Tel: 886-3-6668565 Fax: 886-2-26051924 Fax: 886-3-6668323 Hwa Ya EMC/RF/Safety Tel: 886-3-3183232 Fax: 886-3-3270892 Email: service.adt@tw.bureauveritas.com Web Site: www.bureauveritas-adt.com The address and road map of all our labs can be found in our web site also. --- END --- Report No.: RF180912C10-4 Page No. 34 / 34 Report Format Version: 6.1.1


Document Created: 2019-03-26 17:39:21
Document Modified: 2019-03-26 17:39:21
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC