Manual

FCC ID: M82-AIM8Q

Users Manual

Download: PDF
FCCID_3484518

AIM8Q      Computer




    User Manual




   it & m 1%
                      V1.0


Copyright
The documentation and the software included with this product are copyrighted
2017 by Advantech Co., Ltd. All rights are reserved. Advantech Co., Ltd. reserves
the right to make improvements in the products described in this manual at any time
without notice. No part of this manual may be reproduced, copied, translated or
transmitted in any form or by any means without the prior written permission of
Advantech Co., Ltd. Information provided in this manual is intended to be accurate
and reliable. However, Advantech Co., Ltd. assumes no responsibility for its use, nor
for any infringements of the rights of third parties, which may result from its use.



Acknowledgements
All other product names or trademarks are properties of their respective owners.


Declaration of Conformity
CE Conformity Statement
Radio products with the CE alert marking comply with the R&TTE Directive
(1999/5/EC) issued by the Commission of the European Community. Compliance
with this directive implies conformity to the following European Norms (in brackets
are the equivalent international standards).
+« EN 60950—1 (IEC60950—1) — Product Safety
*« EN 300 328 Technical requirement for radio equipment
*« ET $301 489 General EMC requirements for radio equipment
Products that contain the radio transmitter are labeled with CE alert marking and
may also carry the CE logo.

FCC Compliance Statement
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions,          may cause harmful
interference to radio communications.         However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one of the following measures:
*« Reorient or relocate the receiving antenna.
*« Increase the separation between the equipment and receiver.
*« Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
*« Consult the dealer or an experienced radio/TV technician for help.


To assure continued compliance, any changes or modifications not expressly
approved by the party responsible for compliance could void the user‘s authority to
operate this equipment.       (Example: use only shielded interface cables when
connecting to computer or peripheral devices).


This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
1) This device may not cause harmful interference, and
2) This device must accept any interference received, including interference that
   may cause undesired operation.


15.21
Any changes or modifications not expressly approved by the party responsible for
compliance could void the authority to operate equipment.
This device and its antenna must not be co-located or operating in conjunction with
any other antenna or transmitter.
End-users and installers must be provided with antenna installation instructions and
transmitter operating conditions for satisfying RF exposure compliance.
For product available in the USA/Canada market, only channel 1~11 can be operated.
Selection of other channels is not possible.



FCC Radiation Exposure Statement
This equipment complies with FCC RF radiation exposure limits set forth for an
uncontrolled environment for body-worn configuration in direct contact to the
phantom.
This device complies with FCC radiation exposure limits set forth for an uncontrolled
environment.


This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. End user must follow the specific operating instructions
for satisfying RF exposure compliance. This transmitter must not be co-located or
operating in conjunction with any other antenna or transmitter.

The portable device is designed to meet the requirements for

exposure to radio waves established by the Federal Communications

Commission (USA). These requirements set a SAR limit of 1.6 W/kg

averaged over one gram of tissue. The highest SAR value reported under
this standard during product certification for use when properly worn on the body




                                          4


IC warning statement
This device complies with Industry Canada’s licence-exempt RSSs. Operation is
subject to the following two conditions: (1) This device may not cause interference;
and (2) This device must accept any interference, including interference that may
cause undesired operation of the device.

Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux
appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions
suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de
l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est
susceptible d'en compromettre le fonctionnement.

This radio transmitter has been approved by Industry Canada to operate with the
antenna types listed below with the maximum permissible gain and required
antenna impedance are strictly prohibited for use with this device.

Le present emetteur radio a ete approuve par Industrie Canada pour fonctionner
avec les types d'antenne enumeres ci-dessous et ayant un gain admissible maximal
et l'impedance requise pour chaque type d'antenne. Les types d'antenne non inclus
dans cette liste, ou dont le gain est superieur au gain maximal indique, sont
strictement interdits pour l'exploitation de l'emetteur.

(i)the device for operation in the band 5150–5250 MHz is only for indoor use to
reduce the potential for harmful interference to co-channel mobile satellite systems;
(For devices installed in vehicles point i. is not required.)

Users should also be advised that high-power radars are allocated as primary users
(i.e. priority users) of the bands 5250-5350 MHz and 5650-5850 MHz and that these
radars could cause interference and/or damage to LE-LAN devices.


(i) l'appareil pour fonctionner dans la bande 5150-5250 MHz est réservé à une
utilisation en intérieur afin de réduire les risques d'interférences nuisibles à la
co-canal systèmes mobiles par satellite;


Devraient également être informés les utilisateurs que les radars à haute puissance
sont désignés comme utilisateurs principaux (c.-à-utilisateurs prioritaires) des
bandes 5250-5350 MHz et 5650-5850 MHz et que ces radars pourraient provoquer des
interférences et / ou endommager les appareils LE-LAN.
                                            5


IC Radiation Exposure Statement

This EUT is compliance with SAR for general population/uncontrolled exposure limits
in IC RSS-102. This equipment should be installed and operated with minimum
distance 0 cm between the radiator & your body.

Cet EUT est la conformite avec SAR pour la population generale / les limites
d'exposition incontrolees dans IC RSS-102. Cet equipement doit etre installe et
utilise a une distance minimale de 0 cm entre le radiateur et votre corps.


This equipment complies with ISED radiation exposure limits set forth for an
uncontrolled environment. End user must follow the specific operating instructions
for satisfying RF exposure compliance. This transmitter must not be co-located or
operating in conjunction with any other antenna or transmitter.

The portable device is designed to meet the requirements for exposure to radio
waves established by the ISED. These requirements set a SAR limit of 1.6 W/kg
averaged over one gram of tissue. The highest SAR value reported under this
standard during product certification for use when properly worn on the body.
Cet équipement est conforme aux limites d’exposition aux rayonnements ISED
établies pour un environnement non contrôlé. L’utilisateur final doit suivre les
instructions spécifiques pour satisfaire les normes. Cet émetteur ne doit pas être
co-implanté ou fonctionner en conjonction avec toute autre antenne ou
transmetteur.



NCC Warning Statement
Article 12
Without permission, any company, firm or user shall not alter the frequency,
increase the power, or change the characteristics and functions of the original design
of the certified lower power frequency electric machinery.


Article 14
The application of low power frequency electric machineries shall not affect the
navigation safety nor interfere a legal communication, if an interference is found,
the service will be suspended until improvement is made and the interference no
longer exists.


                                          6


Safety Instructions
 1. Read these safety instructions carefully.
 2. Keep this user manual for later reference.
 3. Disconnect this equipment from AC outlet before cleaning. Do not use liquid or
       spray detergents for cleaning.
       Keep this equipment away from hazard locations.
       Put this equipment on a reliable surface during installation. Dropping it or
       letting it fall could cause damage.
       Do not leave this equipment in an environment unconditioned where the
       storage temperature under —20°C or above 60°C, it may damage the
       equipment.
       Make sure the voltage of the power source is correct before connecting the
       equipment to the power outlet.
       Place the AC power adapter such a way that people cannot step on it. Do not
       place anything over the power adapter.
       All cautions and warnings on the equipment should be noted.
   .   If the equipment is not used for long time, disconnect it from the power
       source to avoid being damaged by transient over—voltage.
 11.   Never pour any liquid into slots of the AIM8Q Series. This could cause
       fire or electrical shock.
 12.   Never open or disassemble the equipment. For safety reasons, the equipment
       should be opened only by qualified service personnel.
 13.   If any of the following situations arises, get the equipment checked by service
       personnel:
       a. The power adapter plug is damaged.
       b. Liquid has penetrated into the equipment.
       c. The equipment has been exposed to moisture.
       d. The equipment does not work well or you cannot get it to work according to
          user manual.
       e. The equipment has obvious signs of breakage.
 14.   This product is intended to be supplied by a UL Listed Power Adapter or DC
       power source, rated 9.0 Vdc, 2A min for model AIM8Q and Tma 50 degree C,
       if need further assistance, please contact Advantech for further information.


Battery Safety
Caution: Danger of explosion if battery is incorrectly replaced. Replace only with the
same type recommended by the manufacturer, discard used batteries according to
the manufacturer‘s instructions.



Attention : Danger d‘explosion si la batterie est inexactement remplacée. Remplacez
seulement avec la méme chose ou le type recommandé par le fabricant, jettent les
batteries utilisées instructions de s selon fabricant des‘.



Mistreat the battery used in this device may present a risk of fire or chemical burn.
Do not attempt to disassemble the computer or its accessories.
Only qualified personal is allowed to replace the battery.
Do not dispose batteries in a fire and check with local authorities for disposal
instructions.



AIM8Q can only be equipped with standard battery pack with Getac,
AIM—BAT—8, 4900mAH Polymer Lithium lon Battery. Use of another battery may
present a risk of fire or explosion.


Battery Charge Notice
It is important to consider the environment temperature whenever you are charging
the Lithium—lon battery pack. The process is more efficient at normal room
temperature or slightly cooler. It is essential that you charge batteries within the
stated range of 0°C to 40°C. Charging batteries outside of the specified range could
damage the batteries and shorten their charging life cycle.


Storage and Safety Notice
Although charge Lithium—lon batteries may be left unused for several months, their
capacity may be depleted due to the buildup of internal resistance. If this happens
they will require recharging prior to use. Lithium lon batteries may be stored at
temperatures between —10°C to 60°C, however they may be depleted more rapidly
at the high end of this range. It is recommended to store AIM8Q within normal room
temperature ranges.


WEEE
EN




Following information is only for EU—member states:
                                                                 Hm
The use of the symbol indicates that this product may not be treated as household
waste. By ensuring this product is disposed of correctly, you will help prevent
potential negative consequences for the environment and human health, which
could otherwise be caused by inappropriate waste handling of this product. For more
information about recycling of this product, please contact your local city office,
your household waste disposal service or the shop where you purchased the product.



Technical Support and Assistance
1. Visit the Advantech website at http://support.advantech.com where you can find
the latest information about the product.
2. Contact your distributor, sales representative, or Advantech‘s customer service
center for technical support if you need additional assistance. Please have the
following information ready before you call:
— Product name and serial number
— Description of your peripheral attachments
— Description of your software (operating system, version, application software,
etc.)
— A complete description of the problem
— The exact wording of any error messages


TABLE OF CONTENT
Chapter 1 IntFOUUCHION...22122220202000020eveeerrerrrrrrrrrerrrerrrerrrrerrrerrrerrrrrerrrerrrrrrrerererrrrerer es 12
   1.1 SymbolSs US@d in this M@BNU@I....1.....2222222222022220200028s66r iss rrs e e ie e se re se se re se ns e eeee se se ee se se ea e e ea aee 13

   1.2 PFOUUCt F@AtUT@S ...............200eeseseessees es se es es se es sesresr es se se esn se resr esn se re se ie resres en sn esn es rnsr es en se ea en es 13

   1.3 PACK@G@ CONT@NES .........22220222220022222222rse02rrsea e ies er es se se se se se se se se se se se se ae se se ae se se ae es aare se aa n e ea n e es 13

   1.4 PrOGUCt SD@CIfIC@tIONS ........2222022222222222222rse226 kss 66 ie se ie se se se se se se se se se se se se ae se se ae se se ae es ea n e ea n e es 14

   1.4.1 Technical SDeCifiC@tIONS ...........222202060e0e 60006600666 666 e 66e e e e e e e e e e e e e e e e e es 14

   1.4.2 Product QutlOOK and DIM@NSIONS ................22266 6e se se es se e e ce e e en en en e e 6e es 16

   1.5 Exploring the AIMB8C.........222..202220222020ssssrrssssrressssrre es es se es se se se ss se esn se esn se se ea se esn se se en e e e ae e 17

   1.5.1 FFONE Vi@W 1222206600006 e e en e e en e e en e e en e en en n en e en e e en e e en en n e en en e en e e en e e e e e e es 17

   1.5.2 R@AF VI@W........606 00e e e e e en en e e en e e en e e en e e n e en en en en e e en e e n e e n e e en en e en e e en e e e e e es 18

   J i ts e 19

   y oo isiA e 20

   1.5.5 BOTEOM VI@W 1......2222222 266666 e e e e e e e e e e en en en e e en e e en e en en n e en en e en e e en e e e e e e es 20

Chapter 2 GettiN§ St@FE@Q ....12020020202202e20ee¥¥ererererrrerrrerrrrrrrrerrrerrrrrerrrerererrrrerererrrrrrr es 21
   2.1 Ch@rg@ th@ COMPUt@F ...........222.222222222222s22r iss r iess sre es sr se se se se se se se se sse se ee se se ae se se ae se se es e se aa e e ea es 21

   2.2 TUFM OM th@ COMPUU@F....2222..222222222200222s602r iess r iess sr se se se se se se se se se se sse se ee se se ae se se ae se se es e se aa e e ea es 22

   plesis Cc t ol ie 22

   2.4 OPETAt@ th@ COMPUE@F....12....2222222222002220600r iess r iess srres se es se se se se se se se sse se ee se se ae se se ae se se es e se aa e e ea es 23

   2.5 LED INCiIC@tOF St@tUS........2.022022002200e2260ee0ee se es re se es es en se esn se ns n es resre se ie resr es r esn es en se rar es en snn en en es 23

Chapter 3 BASIC S@UUPS.........2.202022020eveeerrerrrerrrrrrrrrerrrerrrrerrrerrrerrrrrerrrerrrrrrrrerererrrrrrr es 24

   3.1 Android            6.0.1 BASIC S@tHINGS ..............2..02222222222rs2rrs se es se ie se se se se se se se se se se se se es e se ea se se e e e e aa e 25

Chapter 4 RUNNiNQ @aPPUCATIONS.......2.22020020202 22e¥ reerrerere e rrrerrrerrrrerrrerererrrrrrrrrerrrerr es 26
   4.1 InStalling @PPIIC@TIONS .........2222..222202222020222se02r iss 6e ies er ies se se se se se se se se se se se ae se se ae se se ae es eaaeea e e es 27

   4.1.1 Install applications with Android 6.0.1 ...........222222000s se se se se se se es 6e es 28

Chapter 5 MAINE@NANC@® .........020.0000eee¥eerrrerrrrrerererrrerrrerrrrerrrerererrrrrerrrerererrrerererrrrerer es 29




                                                                               10


5.1 Maintaining the LCD DiSPIAY........11....022222222020020606rrs e e ie er ies se re se se se se se se se eereaee se se aareeeaa e e es 29

5.2 Cleaning the@ AIMBC.                              ..............lllzvzlrrssrrrrssarrrssarrrearrrssaarresaar es es e es es e es se re se eeeaaaaes 29

5.3 TFOUbDI@ SAOOTING ........22222222222222222222rss2r iss r iess r ie se se ie se se se se se se es se se se se se ae se se ae es aa e se aa e ee aa e es 29

5.4 ENERGY STAR......00..0002002ms2ss6rsssrsss es se es se es se se es es es ss es es es es resressre se re se re se re se se en esn esn ee en ee en es 30




                                                                           11


Chapter 1 Introduction

Congratulations on your purchase of the AIM8Q Computer.


AIM8Q is equipped with Qualcomm APQ8074 and supports Android 6.0 OS.


This product combines stylish design with reliable performance and powerful
functionality to best suit all your needs, in a wide range of working conditions. This
user manual outlines all you need to know to set up and use your AIM8Q. If you
have any further questions or queries, contact our technical support team via our
website:


http://support.advantech.com.tw/




                                          12


1.1 Symbols Used in this Manual
                            Denotes information that must be observed.

     A                      Failure to do so may result in personal harm or damage to
                            the product.


     (hyd                   Denotes information that must be observed.

     @                      This is informative notification to have a better

                            experience while using this computer.




1.2 Product Features

*« Low power Intel® ATOM®*" / Qualcomm® Snapdragon"" processor designed for
     mobile applications.
* Support Android 6.0 (AJIM8Q) OS.
* 8" WUXGA projected capacitive multi touch display.
*« —10°C to 50°C, IP65, MIL—STD 810G / 4ft drop compliant.
*« Compact/slim design: 14.5 mm height, 600g weight.
*« Seamless communications, including Wi—Fi, BT, NFC, 3G74G.
*« Optional extension modules, including 1D/2D barcode scanner, MSR, RJ45+COM,
   UHF RFID Reader and more.
*« Optional dock stations, including VESA/Vehicle dock & multi charger design.




1.3 Package Contents
Ensure all the following items are present when you receive your       AIM8Q. If   f any
of these items are missing, contact your dealer immediately.


«_   AIM8Q Computer

* Startup Manual
*« AC power adaptor




                                            13


1.4 Product Specifications

1.4.1 Technical Specifications

Model Name                      AIM8Q

                CPU             Qualcomm APQ8074

Computing       Max Speed       2.2 GHz

System          Memory          2GB LPDDR3

                OS              Android 6.0.1 32 bit

                On-board
                                32GB/64GB ( Default 32GB)
Storage         eMMC

                Micro-SD        Micro-SD Card Slot for Storage Expansion

                Display Type    8” TFT IPS LCD Panel

                Max
                               WUXGA, 1200x1920, 400 nits
Display         Resolution

                Touch Type      Projected Capacitive Multi-Touch

                Class Type      G/G Direct Bonding, Corning GG3 Glass

                WIFI            Dual Band : 802.11ac (5Ghz) or 802.11n(2.4Ghz)

                Bluetooth       Bluetooth v4.0 CLASS II/BLE

                NFC             Read/ Write Device Compatible With ISO15693, ISO14443A, ISO14443B, Felica

                (13.5MHz)

                AGPS            AGPS
Communication
                GPS            GPS & GLONASS & Beidou



                WWAN/ LTE       Mini-PCIe Module

                                NA

                                Micro-SIM Slot

Audio                           Build-In Digital MIC, x1 80dB 1Watt SPK 0.5M, x1 Audio combo jack

                               x1 Micro USB 2.0 (OTG & Charging)

                I/O Port        x1 Micro HDMI: Display
Connectivity
                Interfaces      x1 AIM Dock 16-pin Pogo Connector: USB 3.0

                                x1 AIM Extension 14-pin Pogo Connector: USB 2.0 + TX/RX + Power

                Front           5MP Fixed Focus
Camera
                Rear            13MP Auto Focus with LED Flash

Sensor                          G-sensor + E-compass, Gyroscope, ALS


                                                       14


                                  x1 Power Button

Hard Buttons        Function      x2 Volume Control Button

                                  x1 Programmable Button ( Default as BCR Trigger Key)

System Indicators                 x1 Power / Battery Status

Power Input         Micro USB     DC 5V, 3A                               DC 9V, 2A

                                  Swappable Battery with Battery Meter
                    Capacity      3.8Vdo ; 4900mAH ; 18.62/h
petey               Operating     0~40 °C (Charging)
                    Temperature   —10~50 °C (Discharging)


                    Temperature   Operating: —10°C ~ +50°C, Storage: —20°C ~ +60°C

                    Operating

Environment         & Storage     5% ~95% @ 40° C (non—condensing)

                    Humidity

                    Vibration     Operation: (5—500GHz) 1G, Non—operating: (5—500GHz) 0.04PSD

Ingress             Dust/ Water
                                  IP—65 compliant
Protection          Resistance

                    Dimensions    142 x 240 x 14.5mm (W x H x D)
Ingress
                    Weight        600g
Protection
                    Color         Black/Orange, Grey/Blue, White/Blue




                                                        15


1.4.2 Product Outlook and Dimensions




                                 16


1.5 Exploring the            AIM8Q


1.5.1 Front View




        No.                            Component

1                  Front Camera

                   Power LED
N




                   Light Sensor
W




                   Speaker
&




                                  17


1.5.2 Rear View




        No.                               Component

                  Extension Module

                  NFC
N




                  Rear Camera with LED Flash
W




                  Battery Cover
&




                                     18


1.5.3 Right View




        No.                              Component
                   SIM & SD Card Door
—A




                   Programmable Key (Default BCR)
NJ




                   Pogo Pin (USB3.0)
W




                   Micro USB Door
&




                                    19


1.5.4 Left View




         No.                             Component
                    Micro HDMI Door

                    Power Button

                    Volume Key UP/Down




1.5.5 Bottom View




         No.                             Component
                    Audio Jack (Headset Combo)

                                   20


Chapter 2 Getting Started


2.1 Charge the Computer
To charge the embedded battery in AIM8Q      , connect   the Micro USB adaptor on
the AIM8Q    computer.




                                             - Micro USB Connector




  Ves                    Please charge for at least one hour when you use this
                         computer for the first time.




                                        21


2.2 Turn on the Computer
Push the Power Button (located at no. 2 of Section 1.5.4 Left View.) for 3 seconds to
start the computer.




                                              - Power Button




2.3 Sleep Mode
While the computer is running, push the Power Button for 1 second will move the
equipment into sleep mode for power saving. Push the Power Button again will
enable the backlight again.




                                         22


2.4 Operate the computer
    AIM8Q is s equipped with a 8" Capacitive Touch Panel. Use finger to touch the
following Active Area to operate the computer.




2.5 LED indicator status

   AIM8Q is     s equipped with one LED indicator for battery status. The following
shows LED status for different power states.


This power LED has three colors: Red, Green, and Blue.


a) The Red LED blinks when internal battery capacity is below 10% to warn the user
   to charge.
b) The Blue LED lights up when internal battery is being charged.
c) The Green LED lights up when internal battery has been fully charged.




                                           23


Chapter 3 Basic Setups
 Note      WLAN access requires a separate purchase of an access
           point. Contact a wireless service provider for more
           information.



 Note      Screens used in this manual are for illustrative purposes
           only. Actual screens may vary depending on your product
           version and pre—installed Operating System versions.




                          24


3.1 Andr oid 6.0.1 Basic Settings
Android 6.0.1 Home Screen




         No.                                 Function

                       Back
—A




                       Home
NJ




                       Background Applications
W




                       Program Launcher
&




                                     25


Tap top of the screen and scroll down for Settings menu




                            Eit
                            Tuesday, March 21




          No.                                        Function

                         Connect WLAN
on




                         Battery Status
oo




                        Adjust Backlight
~




                         Connect Bluetooth
co




                                                26


Chapter 4 Running applications
4.1 Installing applications
There are multiple ways to install applications on AIM8       this     section
shows the steps to install applications via Micro SD cards.
1.   Before installation, please ensure your Micro SD card has been correctly
     formatted with FAT32 file system.
2. Copy .apk (Android) on the Micro SD card.
3. Open the Micro SD card slot on the top of the device and inset the card.




                                                - Micro SD Slot




                                          27


4.1.1 Install applications with Android 6.0.1
                                                                                          Lt & 200   ESn

                                 Settings                                                            a


                                 Wireless & networks



                                 ®#          wen             %     Bluetooth


                                 O          Data usage             More



                                 Device


                                 n          Display          ‘     Sound & notification




                                 ©        Apps               1BE   Storage & USB


                                 @          Battery          #     Memory


                                            Users                  Tap & pay




                                 Personal


                                 9          Location         fl     Security




                                 E          Accounts         @     Language & input




                                 €          Backup & reset



                                 System


                                 ©          Date& time       "     Accessibility




a) Go to Settings               b) Go to Storage & USB
                                c) Choose SD Card
                                d) Tap .apk file to install the application




                           28


Chapter 5 Maintenance


5.1 Maintaining the LCD Display

*« Do not scratch the surface of the screen with any hard objects.
* Do not spray liquid directly on the screen or allow excess liquid to drip down inside
the device.
+ Do not place anything, such as food and drink, on the screen at any time to prevent
damage to the screen.
* Clean the LCD display only with a soft cloth dampened with denatured alcohol or a
proprietary LCD screen cleaner.




5.2 Cleaning the AIM8Q

1. Turn off the device and unplug the power cord.
2. Wipe the screen and exterior with a soft, damp cloth moistened only with water.
Do not use liquid or aerosol cleaners on the screen, as these will discolor the finish
and damage the screen.




5.3 Trouble Shooting

 When System behaves abnormally, such as
 1.   Failure to power on.
 2.   Failure to power off.
 3.   Power LED does not light up when DC power plug in.
 4    System does not respond to touch behaviors.


 Contact your distributer, sales representative, or Advantech‘s customer service
 center for technical support if you need additional assistance. Please have the
 following information ready before you call:
 m    Product name and serial number.
 m    Descriptions of your peripheral attachments.
 m    Descriptions of your software (operating system, version, application software,
      etc.)

                                          29


 a    A complete description of the problem.
 @    The exact wording of any error messages.
 m    Symptoms, photo or video if available.




5.4 ENERGY STAR

An ENERGY STAR qualified computer delivers substantial savings over a conventional
computer. Desktop, integrated desktop, and notebook (laptop) computers,
workstations, small—scale servers, and thin clients are all eligible to earn the
ENERGY STAR, and those that do are now more efficient than ever.
It is an honor for Advantech to provide you such products.



What is ENERGY STAR?
ENERGY STAR is a U.S. Environmental Protection Agency (EPA) voluntary program
that helps businesses and individuals save money and protect our climate through
superior energy efficiency.
The ENERGY STAR program was established by EPA in 1992, under the authority of
the Clean Air Act Section 103(g). Section103(g) of the Clean Air Act directs the
Administrator to "conduct a basic engineering research and technology program to
develop, evaluate, and demonstrate non—regulatory strategies and technologies for
reducing air pollution."


In 2005, Congress enacted the Energy Policy Act. Section 131 of the Act amends
Section 324 (42 USC 6294) of the Energy Policy and Conservation Act, and
"established at the Department of Energy and the Environmental Protection Agency
a voluntary program to identify and promote energy—efficient products and buildings
in order to reduce energy consumption, improve energy security, and reduce
pollution through voluntary labeling of or other forms of communication about
products and buildings that meet the highest energy efficiency standards."


For more information, please visit www.energystar.gov




                                          30


AIM8Q display goes to dark and enter suspend mode after 1
min idle. To wake it from sleep mode, simply press the power button on the back
cover, while under sleep mode it allows the device to save 80% or more energy.


Power Management System:
Lists of default power management systems
Balanced
(Default)        AIM8Q; Idle 1 min. closes screen and enter sleep mode.
High            Never idle and never enters sleep mode.
performance




                                        31



Document Created: 2017-07-14 21:55:42
Document Modified: 2017-07-14 21:55:42

© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC