User Manual

FCC ID: M45-46066

Users Manual

Download: PDF
FCCID_2086463

UBSAN® _profo * Do not turn on Proto X unless controller has been turned on first. FCC STATEMENT AND INDUSTRY CANADA NOTICE: * Keep hands, hair and loose clothing away from spinning blades. 1. This device complies with Part 15 of the FCC Rules and RSS—210 of Industry Canada. * Turn off controller and Proto X when not in use. Operation is subject to the following two conditions: * Parental guidance is recommended. (1) This device may not cause harmful interference, and * Do not submerge into water. This could damage electronic assemblies. (2) This device must accept any interference received, including interference that may * Follow operating instructions exactly. cause undesired operation. * Not intended for children under 8 years old. * Replace any damaged or broken parts before attempting to fly. 2. Changes or modifications not expressly approved by the party responsible for * Do not drop the Proto X by suddenly reducing the throttle. This could compliance could void the user‘s authority to operate the equipment. lead to severe damage. Remark: This device is in accordance with the digital device grade B limitation and the * The Proto X‘s range will also be affected if the battery is not fully 15th regulation of FCC. This limitation requires reasonable anti—interference protection charged. around the residence. The device can transmit radio wave during use and can interrupt * Do not touch the motors after flying. They can becomehot. the mobile communication without proper installment. Interruption will occur for special device. If the device do interrupt the radio or television, please turn the device off then turn it on to adjust. Below are some resolution for your reference: * Move the receiving antenna * Enlarge the distance between the device and receiver CAUTION: Changes or modifications to Do not touch the * Try to not connect the device and the receiver on the same circuit this product not expressly approved by spinning blades or * Ask for professional help from experts the party responsible for compliance may fly over another person‘s void the user‘s authority to operate the head. Adult supervision is 3. This digital apparatus does not exceed the Class B limits for radio nolse emissions equipment. required. from digital apparatus set out in the Radio Interference Regulations of Industry Canada. Battery Requirements for Controller: The Proto X is equipped with a rechargeable 3.7V LiPo battery. Requires: 2 x 1.5V AAA size batteries (not included) Please pay attention to the following cautions for safe use: * Do not dispose of battery into fire or heat. Requirements for USB Charge Cord: * Do not use or leave battery near a heat source, such as fire or a heater. USB Output Jack (not included) * Do not strike battery or throw it against a hard surface. Battery Cautions: * Do not pierce battery. n * Parental guidance is recommended when installing batteries. * Do not disassemble or alter battery. ‘ * Do not power controller by mixing different types of batteries, or old and new batteries. * Tum off power switch after use * Use only batteries of the same or equivalent type as those recommended. * Recycle used batteries. LIPo 90 DAY LIMITED WARRANTY PLEASE DG NOT RETURN YOUR PRODUCT TO THE STORE — Estes will repair or replace factory defects for 90 days from the date of purchase. This warranty specifically does not cover crash damage, misuse or abuse. To make a warranty claim, please contact our product support team at 1—217—398—8970 or e—mail us at productsupport@hobbico.com If requested by Product Support, please send defective product to: Hobby Services, 3002 N Apollo Dr., Suite #1, Champaign, IL 61822 This warranty applies only if the product is operated in compliance with the instructions and warnings provided with each model. Estes assumes no liability except for the exclusive remedy or repair of parts as specified above. Estes shall not be liable for consequential or incidental damages. Some states do not allow the exclusion of consequential or incidental damages so the above exclusion may not apply to you. This warranty gives you specific legal rights and you may also have other rights which vary from state to state. QET READY TO FLY 6 The battery connector will only fit in one way. Do not force the connectors together. Set the Proto X on a level surface until the blue LEDs change from blinking to solid. Switch on controller.

How To FLY FORWARD FORWARD ; ; BAGKWARD RIGHT CORRECTINQG DRIFT REPLACEMENT BLADES It is normal for the Proto X to drift slightly. Howeverif it drifts in any FRONT direction consistently press the trim button opposite the movement Gray Blades, Blue LEDs as many times a needed to eliminate the drift. REAR Black Blades, Red LEDs LANDINQ SAFELY LINK THE TRANSMITTER When the battery voltage begins to run low, the LEDs will begin Hold the throttle stick at full down and turn on the controller. .. to flash. It is time to land before the built in low voltage cut off Wait until the red LED turns green. reduces power to the motors. ())kU TROUBLESHOOTING PROBLEM: Controller cannot be linked to the ProtoX. SOLUTION: Throttle position needs to be at zero. PROBLEM: Controller LED flashing after binding. SOLUTION: Replace batteries. PROBLEM: Proto X shaking. SOLUTION: Check if the canopy, chassis and rotors are damaged. PROBLEM: Will not take off. SOLUTION: Check that the rotor blades are properly installed.


Document Created: 2013-09-27 09:28:23
Document Modified: 2013-09-27 09:28:23
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC