C2PC

FCC ID: LO6-DVRS700

Cover Letter(s)

Download: PDF
FCCID_4101187

13th November 2018 To Whom It May Concern Subject: Class II Permissive Change Request Applicant: Futurecom Systems Group ULC Product: MOBEXCOM DVR Digital Vehicular Repeater Model: MOBEXCOM DVR 700 FCC ID: LO6-DVRS700 Dear Sir/Madam, I hereby appoint UltraTech Engineering Labs Inc. (UltraTech) to act as my agent in preparation of this application to FCC for a Class II Permissive Change under FCC Rules. This change is one of many that were approved by the FCC and/or TIMCO and/or UltraTech. Customers of Futurecom intend to use Mobexcom DVR 700 transmitting simultaneously with Companion Mobile radio (FCC ID: AZ492FT7118), using various combinations of antennas. See the attached MPE/SAR Assessment Reports. The antennas used for this Class II Permissive Change are HAF4016A for the Mobexcom DVR 700 and HAD4016A, HAD4017A, HAD4021A, HAD4006A, HAD4007A, HAD4008A, HAD4009A, HAD4022A, RAD4010ARB, HAE6010A, HAE6011A, HAE6012A, HAE6013A, HAE6031A, HAE4003A, HAE4011A, HAE6015A, HAE6016A, RAE4014ARB, HAE4004A, HAE4012A, HAE4013A, RAE4015ARM, RAE40416ARB, HAF4013A, HAF4014A, HAF4016A, HAF4017A, AN000131A01, PMAN5100A, AN000163A01, AN000163A05 and PMAN5101A for the Companion Mobile radio. A Class II Permissive Change is required to certify minimum distances between the vehicle and bystanders with both the Mobexcom DVR 700 and the Motorola mobile radio. SAR Computational Simulations were performed on the Mobexcom DVR 700 and the mobile radio with different antennas mounted on a car. The combined system (the DVR and the Mobile Radio) have no effect on the RF performance but the aggregate exposure and power are both higher for the combined system. The operation of the DVR System can be found on pages 6 through 8 of the draft Users Manual. All hardware for this system complies with the requirements of 90.247 and it is the responsibility of the Licensee to comply with the operational requirements of this section. The MPE/SAR Assessment Reports, draft Users Manual, and the RF Safety Booklet are attached. 3277 LANGSTAFF ROAD, Concord, Ontario L4K 5P8, Canada, Tel: (905)660-5548 Fax: (905)660-1380

I also certify that the information provided, properly described the device or system for which Class II Permissive Change is required. Sincerely, Tony Bombera, P.Eng. 2


Document Created: 2018-11-29 12:17:18
Document Modified: 2018-11-29 12:17:18
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC