OPERATIONAL DESCRIPTION

FCC ID: LLP-NTID800

Operational Description

Download: PDF
FCCID_560805

EUT OPERATING CONDITIONS The Wireless Speaker System was powered from 110V, 60Hz mains supply. Tests Description Of Operation 1. Conducted Emissions The EUT was exercised by operating in the test mode with 2. Radiated Emissions maximum transmitting power and following configuration during 3. Carrier Frequency the tests: Separation 4. Spectrum Bandwidth (20dB Carrier Frequency Separation, Number of Hopping Frequency, Bandwidth Measurement) Average Frequency Dwell Time, Band Edge at the Transmitting Antenna and Maximum Permissible Exposure: 5. Number Of Hopping Frequencies 6. Average Frequency Dwell Frequency hopping and modulation are on. Time 7. Maximum Peak Power 8. RF Conducted Spurious Conducted Emissions, Radiated Emissions, Spectrum Emissions at the Transmitter Bandwidth (20dB Bandwidth Measurement), Maximum Peak Antenna Terminal Power, RF Conducted Spurious Emissions at the Transmitter 9. Band Edge Compliance at Antenna Terminal, Peak Power Spectral Density, Maximum the Transmitter Antenna Permissible Exposure and Duty Cycle Correction Factor Terminal 10. Peak Power Spectral Density Frequency hopping is off and the modulation is on. 11. Maximum Permissible Exposure 12. Duty Cycle Correction Factor


Document Created: 2005-07-07 17:01:23
Document Modified: 2005-07-07 17:01:23
© 2025 FCC.report
This site is not affiliated with or endorsed by the FCC