Attestation Statement of Compliance to Part 15

FCC ID: LDKXSNIAG13

Attestation Statements

Download: PDF
FCCID_537333

Ciseo Systews Cisco Systems, Inc. 170 West Tasman Drive San Jose, CA 95134—1706 Phone: 408 526—4000 Fax: 408 526—4100 http://www.cisco.com Date: 4/5/2005 Attestation Statement of Compliance to Part 15 Regulations ECC ID: LDKXSNIAG13 The above device meets the various requirements as spelled out in Part 15 Subpart A and Part 15 Subpart C. Part 15.15 compliance: There are no user accessible controls that allow the end user to adjust the power output, channel set or frequency selection that would result in a non conformance to ECC regulations. The channels sets and maximum allowed power for the highest gain antenna is preset at the factory. Part 15.27; Any special accessories approved with this radio such as antenna cables, antennas, and such are available directly from Cisco Systems. Further the systems are shipped with a set of the low gain antennas if a customer does not order any of our alternative antennas. Part 15.203. The radio can only be connected to the Cisco antennas via a non standard Reverse TNC Connector which is part of the radio card platform. Part 15.204, the Cisco manual clearly lists the antennas that have been approved with this product. The manual will contain a warning statement about the use on non approved antennas. Sincerely, Tss yste Lf#y ~se4er(Aigs 5ks 2* Sudip Das, EMC Engineer Cisco Systems, Inc.


Document Created: 2005-04-05 13:07:55
Document Modified: 2005-04-05 13:07:55
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC