RF Exposure MPE

FCC ID: LDKXSCLCR15

RF Exposure Info

Download: PDF
FCCID_598012

MPE Calculations (Mobile) The device is not a portable device (i.e. intended to be worn on the body or be hand-held), so it is classified as being either a mobile device or a fixed mounted device. The userís manual specifies a minimum separation distance of at least 20cm, consistent with this classification. FCC part 1.1310, Table 1 limits the power density for uncontrolled exposure. The power density, Pd (mW/cm2 ) calculated from the maximum EIRP, Pt (mW) and the distance, d (m), between the transmitting antenna and the closest person, can be calculated using: Formula is: Pd = Pt / (4*pi*d2) MPE Limit Pd at 20cm Distance where Pd Frequency (MHz) Eirp (mW) (mW/cm2) (mW/cm2) = Limit (cm) 2400 - 4990 1 1900.93 0.38 12.3 Output Power Antenna gain EIRP Total EIRP Band Mode Channels Available Channels Used Peak Average (Max) dBm W W dBm 2400 - 2483.5 CCK - 20.0 7.5 27.5 0.562 11 1 0.562 27.50 2400 - 2483.5 CCK - 20.0 7.5 27.5 0.562 11 1 0.562 27.50 4940 - 4990 OFDM - 21.4 7.5 28.9 0.776 10 1 0.776 28.90 Totals: 3 1.901 32.79 MPE exposure is based on two 2.4GHz pre-approved modules with one 4.9GHz transmitter. Device can be programmed to transmitt simultaneously. Formula is: Pd = Pt / (4*pi*d2) MPE Limit Pd at 20cm Distance where Pd Frequency (MHz) Eirp (mW) (mW/cm2) (mW/cm2) = Limit (cm) 2400 - 4990 1 1687.02 0.34 11.6 Output Power Antenna gain EIRP Total EIRP Band Mode Channels Available Channels Used Peak Average (Max) dBm W W dBm 2400 - 2483.5 CCK - 20.0 7.5 27.5 0.562 11 1 0.562 27.50 2400 - 2483.5 CCK - 20.0 7.5 27.5 0.562 11 1 0.562 27.50 2400 - 2483.5 CCK - 20.0 7.5 27.5 0.562 11 1 0.562 27.50 Totals: 3 1.687 32.27 MPE exposure is based on three 2.4GHz transmitter. Device can be programmed to transmitt simultaneously. Formula is: 2 Pd = Pt / (4*pi*d ) MPE Limit Pd at 20cm Distance where Pd Frequency (MHz) Eirp (mW) (mW/cm2) (mW/cm2) = Limit (cm) 2400 - 4990 1 2114.84 0.42 13.0 Output Power Antenna gain EIRP Total EIRP Band Mode Channels Available Channels Used Peak Average (Max) dBm W W dBm 2400 - 2483.5 CCK - 20.0 7.5 27.5 0.562 11 1 0.562 27.50 4940 - 4990 OFDM - 21.4 7.5 28.9 0.776 10 1 0.776 28.90 4940 - 4990 OFDM - 21.4 7.5 28.9 0.776 10 1 0.776 28.90 Totals: 3 2.115 33.25 MPE exposure is based on two 4.9GHz transmitter and one 2.4GHz radio. Device can be programmed to transmitt simultaneously.

MPE Calculations (Fixed Location) The device is not a portable device (i.e. intended to be worn on the body or be hand-held), so it is classified as a fixed mounted device. The userís manual specifies a minimum separation distance of at least 35cm, consistent with this classification. FCC part 1.1310, Table 1 limits the power density for uncontrolled exposure. The power density, Pd (mW/cm2 ) calculated from the maximum EIRP, Pt (mW) and the distance, d (m), between the transmitting antenna and the closest person, can be calculated using: Formula is: Pd = Pt / (4*pi*d2) MPE Limit Pd at 20cm Distance where Pd Frequency (MHz) Eirp (mW) (mW/cm2) (mW/cm2) = Limit (cm) 2400 - 4990 1 22401.78 4.46 42.2 Output Power Antenna gain EIRP Total EIRP Band Mode Channels Available Channels Used Peak Average (Max) dBm W W dBm 2400 - 2483.5 CCK - 13.0 21.0 34.0 2.51 11 1 2.512 34.00 2400 - 2483.5 CCK - 13.0 21.0 34.0 2.51 11 1 2.512 34.00 4940 - 4990 OFDM - 21.4 21.0 42.4 17.38 10 1 17.378 42.40 Totals: 3 22.402 43.50 MPE exposure is based on two 2.4GHz pre-approved modules with one 4.9GHz transmitter. Device can be programmed to transmitt simultaneously. Formula is: 2 Pd = Pt / (4*pi*d ) MPE Limit Pd at 20cm Distance where Pd Frequency (MHz) Eirp (mW) (mW/cm2) (mW/cm2) = Limit (cm) 2400 - 4990 1 7535.66 1.50 24.5 Output Power Antenna gain EIRP Total EIRP Band Mode Channels Available Channels Used Peak Average (Max) dBm W W dBm 2400 - 2483.5 CCK - 13.0 21.0 34.0 2.512 11 1 2.512 34.00 2400 - 2483.5 CCK - 13.0 21.0 34.0 2.512 11 1 2.512 34.00 2400 - 2483.5 CCK - 13.0 21.0 34.0 2.512 11 1 2.512 34.00 Totals: 3 7.536 38.77 MPE exposure is based on three 2.4GHz transmitter. Device can be programmed to transmitt simultaneously. Formula is: Pd = Pt / (4*pi*d2) MPE Limit Pd at 20cm Distance where Pd Frequency (MHz) Eirp (mW) (mW/cm2) (mW/cm2) = Limit (cm) 2400 - 4990 1 37267.90 7.41 54.5 Output Power Antenna gain EIRP Total EIRP Band Mode Channels Available Channels Used Peak Average (Max) dBm W W dBm 2400 - 2483.5 CCK - 13.0 21.0 34.0 2.512 11 1 2.512 34.00 4940 - 4990 OFDM - 21.4 21.0 42.4 17.38 10 1 17.378 42.40 4940 - 4990 OFDM - 21.4 21.0 42.4 17.38 10 1 17.378 42.40 Totals: 3 37.268 45.71 MPE exposure is based on two 4.9GHz transmitter and one 2.4GHz radio. Device can be programmed to transmitt simultaneously.


Document Created: 2005-10-20 14:04:52
Document Modified: 2005-10-20 14:04:52
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC