RF Exposure Report

FCC ID: LDKTG2050

RF Exposure Info

Download: PDF
FCCID_1804369

         FCC Part 1 Subpart I
        FCC Part 2 Subpart J
  INDUSTRY CANADA RSS 102 ISSUE 3

        RF EXPOSURE REPORT

                 FOR

802.11 a/b/g/n 2X2 ACCESS POINT MODULE

        MODEL NUMBER: AP802

          FCC ID: LDKTG2050
           IC: 2461B-TG2050

    REPORT NUMBER: 12U14476-12

   ISSUE DATE: SEPTEMBER 14, 2012

             Prepared for
         CISCO SYSTEMS, INC.
       170 WEST TASMAN DRIVE
      SAN JOSE, CA 95134, U.S.A.

               Prepared by
                 UL CCS
         47173 BENICIA STREET
       FREMONT, CA 94538, U.S.A.
           TEL: (510) 771-1000
           FAX: (510) 661-0888


REPORT NO: 12U14476-12                                               DATE: SEPTEMBER 14, 2012
EUT: 802.11 a/b/g/n 2X2 ACCESS POINT MODULE                                     MODEL: AP802

                                        Revision History



          Issue
 Rev.     Date          Revisions                                                    Revised By
  --      09/14/12      Initial Issue                                                F. Ibrahim




                                          Page 2 of 17
UL CCS                                                                      FORM NO: CCSUP4701H
47173 BENICIA STREET, FREMONT, CA 94538, USA          TEL: (510) 771-1000      FAX: (510) 661-0888
   This report shall not be reproduced except in full, without the written approval of UL CCS.


REPORT NO: 12U14476-12                                                                               DATE: SEPTEMBER 14, 2012
EUT: 802.11 a/b/g/n 2X2 ACCESS POINT MODULE                                                                     MODEL: AP802

                                               TABLE OF CONTENTS
1.     ATTESTATION OF TEST RESULTS .................................................................................... 4

2.     TEST METHODOLOGY ........................................................................................................ 5

3.     REFERENCES ...................................................................................................................... 5

4.     FACILITIES AND ACCREDITATION .................................................................................... 5

5.     MAXIMUM PERMISSIBLE EXPOSURE ............................................................................... 6
     5.1.    LIMITS APPLICABLE TO THE EUT ............................................................................... 9
     5.2.    INDUSTRY CANADA EXEMPTION ............................................................................... 9
     5.3.    RESULTS ..................................................................................................................... 10




                                                             Page 3 of 17
UL CCS                                                                                                    FORM NO: CCSUP4701H
47173 BENICIA STREET, FREMONT, CA 94538, USA                                  TEL: (510) 771-1000            FAX: (510) 661-0888
      This report shall not be reproduced except in full, without the written approval of UL CCS.


REPORT NO: 12U14476-12                                               DATE: SEPTEMBER 14, 2012
EUT: 802.11 a/b/g/n 2X2 ACCESS POINT MODULE                                     MODEL: AP802


1. ATTESTATION OF TEST RESULTS
COMPANY NAME:                CISCO SYSTEMS, INC.
                             170 WEST TASMAN DRIVE
                             SAN JOSE, CA 95134

EUT DESCRIPTION:             802.11 a/b/g/n 2X2 ACCESS POINT MODULE

MODEL:                       AP802


                                 APPLICABLE STANDARDS
                         STANDARD                                      TEST RESULTS
         FCC PART 1 SUBPART I & PART 2 SUBPART J                              Pass
            INDUSTRY CANADA RSS 102 ISSUE 3                                   Pass


UL CCS calculated the RF Exposure of the above equipment in accordance with the
requirements set forth in the above standards, using test results reported in the test report
documents referenced below and/or documentation furnished by the applicant. All indications of
Pass/Fail in this report are opinions expressed by UL CCS based on interpretations of these
calculations. The results show that the equipment is capable of demonstrating compliance with
the requirements as documented in this report.

Note: The results documented in this report apply only to the tested sample, under the
conditions and modes of operation as described herein. This document may not be altered or
revised in any way unless done so by UL CCS and all revisions are duly noted in the revisions
section. Any alteration of this document not carried out by UL CCS will constitute fraud and
shall nullify the document. This report must not be used by the client to claim product
certification, approval, or endorsement by NVLAP, NIST, any agency of the Federal
Government, or any agency of any government.

Approved & Released For UL CCS By:                  Tested By:




FRANK IBRAHIM                                       DAVID GARCIA
WiSE PROJECT LEADER                                 EMC ENGINEER
UL CCS                                              UL CCS




                                          Page 4 of 17
UL CCS                                                                      FORM NO: CCSUP4701H
47173 BENICIA STREET, FREMONT, CA 94538, USA          TEL: (510) 771-1000      FAX: (510) 661-0888
   This report shall not be reproduced except in full, without the written approval of UL CCS.


REPORT NO: 12U14476-12                                               DATE: SEPTEMBER 14, 2012
EUT: 802.11 a/b/g/n 2X2 ACCESS POINT MODULE                                     MODEL: AP802


2. TEST METHODOLOGY
All calculations were made in accordance with FCC OET Bulletin 65 Edition 97-01 and IC Safety
Code 6.


3. REFERENCES
All measurements were made as documented in test report UL CCS Document “12U14476-1B
FCC IC DTS WLAN Report” for operation in the 2.4 GHz band and UL CCS Document
“12U14476-2A FCC IC UNII WLAN Report” for operation in the 5 GHz bands.

For the licensed bands, measurements were made as documented in the following sheets:

Bills2_C819HG_4G_A_MC7710_MPE_Gain_TRP_EIRP_summary
Bills2_C819HG_4G_G_MC7700_MPE_Gain_TRP_EIRP_summary
Bills2_C819HG_4G_V_MC7750_MPE_Gain_TRP_EIRP_summary
Bills2_C819HGW_+7_A_MC8705_MPE_Gain_TRP_EIRP_summary
Bills2_C819HGW_+7_E_MC8705_MPE_Gain_TRP_EIRP_summary
Bills2_C819HGW_+7_V_MC5728V_MPE_Gain_TRP_EIRP_summary
EHWIC_4G_LTE_A_MC7700_MPE_Gain_TRP_EIRP_summary
EHWIC_4G_LTE_G_MC7710_MPE_Gain_TRP_EIRP_summary
EHWIC-4G_V_MC7750_MPE_Gain_TRP_EIRP_summary
Heroes_C812G_CiFi_+7_E_MC8705_MPE_Gain_TRP_EIRP_summary
Heroes_C812G_CiFi_+7_N_MC8705_MPE_Gain_TRP_EIRP_summary
Heroes_C812G_CiFi+7_V_MC5728V_MPE_Gain_TRP_EIRP_summary
McLaren2_C881GW_V_A_MC5728V_MPE_Gain_TRP_EIRP_summary
McLaren2_C887VAGW_+7_A_MC8705_MPE_Gain_TRP_EIRP_summary
McLaren2_C887VAGW+7_E_MC8705_MPE_Gain_TRP_EIRP_summary

Output power, Duty cycle and Antenna gain data is excerpted from the applicable test reports,
and from product documentation provided by the applicant.

Antenna gain data is excerpted from the applicable test reports, and from product
documentation provided by the applicant.

4. FACILITIES AND ACCREDITATION
The test sites and measurement facilities used to collect data are located at 47173 Benicia
Street, Fremont, California, USA.

UL CCS is accredited by NVLAP, Laboratory Code 200065-0. The full scope of accreditation
can be viewed at http://www.ccsemc.com.




                                          Page 5 of 17
UL CCS                                                                      FORM NO: CCSUP4701H
47173 BENICIA STREET, FREMONT, CA 94538, USA          TEL: (510) 771-1000      FAX: (510) 661-0888
   This report shall not be reproduced except in full, without the written approval of UL CCS.


REPORT NO: 12U14476-12                                               DATE: SEPTEMBER 14, 2012
EUT: 802.11 a/b/g/n 2X2 ACCESS POINT MODULE                                     MODEL: AP802

5. MAXIMUM PERMISSIBLE EXPOSURE

FCC RULES

§1.1310 The criteria listed in Table 1 shall be used to evaluate the environmental impact of
human exposure to radio-frequency (RF) radiation as specified in §1.1307(b), except in the case
of portable devices which shall be evaluated according to the provisions of §2.1093 of this
chapter.




                                          Page 6 of 17
UL CCS                                                                      FORM NO: CCSUP4701H
47173 BENICIA STREET, FREMONT, CA 94538, USA          TEL: (510) 771-1000      FAX: (510) 661-0888
   This report shall not be reproduced except in full, without the written approval of UL CCS.


REPORT NO: 12U14476-12                                               DATE: SEPTEMBER 14, 2012
EUT: 802.11 a/b/g/n 2X2 ACCESS POINT MODULE                                     MODEL: AP802

IC RULES

IC Safety Code 6, Section 2.2.1 (a) A person other than an RF and microwave exposed worker
shall not be exposed to electromagnetic radiation in a frequency band listed in Column 1 of
Table 5, if the field strength exceeds the value given in Column 2 or 3 of Table 5, when
averaged spatially and over time, or if the power density exceeds the value given in Column 4 of
Table 5, when averaged spatially and over time.




                                          Page 7 of 17
UL CCS                                                                      FORM NO: CCSUP4701H
47173 BENICIA STREET, FREMONT, CA 94538, USA          TEL: (510) 771-1000      FAX: (510) 661-0888
   This report shall not be reproduced except in full, without the written approval of UL CCS.


REPORT NO: 12U14476-12                                                 DATE: SEPTEMBER 14, 2012
EUT: 802.11 a/b/g/n 2X2 ACCESS POINT MODULE                                       MODEL: AP802

EQUATIONS

Power density is given by:

S = EIRP / (4 * Pi * D^2)
where
S = Power density in W/m^2
EIRP = Equivalent Isotropic Radiated Power in W
D = Separation distance in m

Power density in units of W/m^2 is converted to units of mW/cm^2 by dividing by 10.


Distance is given by:

D = SQRT (EIRP / (4 * Pi * S))
where
D = Separation distance in m
EIRP = Equivalent Isotropic Radiated Power in W
S = Power density in W/m^2


Where applicable (for example, multi-slot cell phone applications) a duty cycle factor may be
applied.

Source-based time-averaged EIRP = (DC / 100) * EIRP
where
DC = Duty Cycle in %, as applicable
EIRP = Equivalent Isotropic Radiated Power in W


For multiple chain devices, and colocated transmitters operating simultaneously in frequency
bands where the limit is identical, the total power density is calculated using the total EIRP
obtained by summing the Power * Gain product (in linear units) of each transmitter.

Total EIRP = (P1 * G1) + (P2 * G2) + ... + (Pn * Pn)
where
Px = Power of transmitter x
Gx = Numeric gain of antenna x


For multiple colocated transmitters operating simultaneously in frequency bands where different
limits apply, either the lowest limit applicable to the co-located transmitters can be applied or a
fraction of the exposure limit is established for each band, such that the sum of the fractions is
less than or equal to one.

In the table(s) below, Power and Gain are entered in units of dBm and dBi respectively and
conversions to linear forms are used for the calculations.




                                           Page 8 of 17
UL CCS                                                                       FORM NO: CCSUP4701H
47173 BENICIA STREET, FREMONT, CA 94538, USA           TEL: (510) 771-1000      FAX: (510) 661-0888
   This report shall not be reproduced except in full, without the written approval of UL CCS.


REPORT NO: 12U14476-12                                               DATE: SEPTEMBER 14, 2012
EUT: 802.11 a/b/g/n 2X2 ACCESS POINT MODULE                                     MODEL: AP802

   5.1.       LIMITS APPLICABLE TO THE EUT
For mobile radio equipment operating in the cellular phone band, the lowest power density limit
is calculated using the lowest frequency, as 824 MHz / 1500 = 0.55 mW/cm^2 (FCC) and 824
MHz / 150 = 5.5 W/m^2 (IC).

For operation in the PCS band, the 2.4 GHz band and the 5 GHz bands, from FCC §1.1310
Table 1 (B), the maximum value of S = 1.0 mW/cm^2 and from IC Safety Code 6, Section 2.2
Table 5 Column 4, S = 10 W/m^2.
From FCC §1.1310 Table 1 (B), the maximum value of S = 1.0 mW/cm^2

From IC Safety Code 6, Section 2.2 Table 5 Column 4, S = 10 W/m^2


   5.2.       INDUSTRY CANADA EXEMPTION
RSS-102 Clause 2.5.2 RF exposure evaluation is required if the separation distance between
the user and the device’s radiating element is greater than 20 cm, except when the device
operates as follows:
   •below 1.5 GHz and the maximum e.i.r.p. of the device is equal to or less than 2.5 W;
   •at or above 1.5 GHz and the maximum e.i.r.p. of the device is equal to or less than 5 W.




                                          Page 9 of 17
UL CCS                                                                      FORM NO: CCSUP4701H
47173 BENICIA STREET, FREMONT, CA 94538, USA          TEL: (510) 771-1000      FAX: (510) 661-0888
   This report shall not be reproduced except in full, without the written approval of UL CCS.


REPORT NO: 12U14476-12                                                   DATE: SEPTEMBER 14, 2012
EUT: 802.11 a/b/g/n 2X2 ACCESS POINT MODULE                                         MODEL: AP802

   5.3.           RESULTS

     Band            (GHz)      0.8   2.4     2.4     5       5
     Mode                      GSM WLAN WLAN WLAN WLAN
  Transmitter                  Cell Chain 0 Chain 1 Chain 0 Chain 1
  Separation         (cm)
                                20      20      20        20      20
   Distance
 Output Power        (dBm)     33.9    20.5    20.2       22.2   22.1
 Antenna Gain        (dBi)      4.1    4.0      4.0       6.0     6.0
   Duty Cycle        (%)      25       100     100        100    100
 Source Based       (mW)
                            1570.1    283.8    264.2   657.7     648.6
      EIRP
   FCC Power      (mW/cm^2)
                             0.31      0.06    0.05       0.13   0.13
     Density
   FCC Power      (mW/cm^2)
  Density Limit              0.53       1        1         1       1
    IC Power       (W/m^2)
     Density                 3.125     0.565   0.526   1.309     1.291
    IC Power       (W/m^2)
  Density Limit               5.3       10      10        10      10
Fraction of Limit    (%)
                               59.0     5.6     5.3       13.1   12.9
     Sum of          95.9
  Fractions (%)




                                          Page 10 of 17
UL CCS                                                                       FORM NO: CCSUP4701H
47173 BENICIA STREET, FREMONT, CA 94538, USA           TEL: (510) 771-1000      FAX: (510) 661-0888
   This report shall not be reproduced except in full, without the written approval of UL CCS.


REPORT NO: 12U14476-12                                                 DATE: SEPTEMBER 14, 2012
EUT: 802.11 a/b/g/n 2X2 ACCESS POINT MODULE                                       MODEL: AP802




     Band             (GHz)       1.9   2.4     2.4     5       5
     Mode                        GSM WLAN WLAN WLAN WLAN
  Transmitter                    Cell Chain 0 Chain 1 Chain 0 Chain 1
  Separation          (cm)
                                  20       20      20         20      20
   Distance
 Output Power        (dBm)       30.9     20.5    20.2       22.2    22.1
 Antenna Gain         (dBi)       4.6     4.0      4.0       6.0      6.0
   Duty Cycle          (%)        25      100      100       100     100
 Source Based       (mW)
                                 883.0   283.8    264.2     657.7   648.6
      EIRP
   FCC Power      (mW/cm^2)
                                 0.18     0.06    0.05       0.13    0.13
     Density
   FCC Power      (mW/cm^2)
  Density Limit                    1       1        1         1        1
    IC Power       (W/m^2)
     Density                     1.757   0.565    0.526     1.309    1.291
    IC Power       (W/m^2)
  Density Limit                   10       10      10         10      10
Fraction of Limit    (%)
                                 17.6      5.6     5.3       13.1    12.9
     Sum of           54.5
  Fractions (%)




                                          Page 11 of 17
UL CCS                                                                        FORM NO: CCSUP4701H
47173 BENICIA STREET, FREMONT, CA 94538, USA            TEL: (510) 771-1000      FAX: (510) 661-0888
   This report shall not be reproduced except in full, without the written approval of UL CCS.


REPORT NO: 12U14476-12                                                 DATE: SEPTEMBER 14, 2012
EUT: 802.11 a/b/g/n 2X2 ACCESS POINT MODULE                                       MODEL: AP802




     Band             (GHz)      0.8    2.4     2.4     5       5
     Mode                       CDMA WLAN WLAN WLAN WLAN
  Transmitter                    Cell Chain 0 Chain 1 Chain 0 Chain 1
  Separation          (cm)
                                  20       20      20         20      20
   Distance
 Output Power        (dBm)       25.0     20.5    20.2       22.2    22.1
 Antenna Gain         (dBi)       4.5     4.0      4.0       6.0      6.0
   Duty Cycle          (%)        100     100      100       100     100
 Source Based       (mW)
                                 889.2   283.8    264.2     657.7   648.6
      EIRP
   FCC Power      (mW/cm^2)
                                 0.18     0.06    0.05       0.13    0.13
     Density
   FCC Power      (mW/cm^2)
  Density Limit                  0.53      1        1         1        1
    IC Power       (W/m^2)
     Density                     1.770   0.565    0.526     1.309    1.291
    IC Power       (W/m^2)
  Density Limit                   5.3      10      10         10      10
Fraction of Limit    (%)
                                 33.4      5.6     5.3       13.1    12.9
     Sum of           70.3
  Fractions (%)




                                          Page 12 of 17
UL CCS                                                                        FORM NO: CCSUP4701H
47173 BENICIA STREET, FREMONT, CA 94538, USA            TEL: (510) 771-1000      FAX: (510) 661-0888
   This report shall not be reproduced except in full, without the written approval of UL CCS.


REPORT NO: 12U14476-12                                                   DATE: SEPTEMBER 14, 2012
EUT: 802.11 a/b/g/n 2X2 ACCESS POINT MODULE                                         MODEL: AP802




     Band           (GHz)      1.9    2.4     2.4     5       5
     Mode                     CDMA WLAN WLAN WLAN WLAN
  Transmitter                  Cell Chain 0 Chain 1 Chain 0 Chain 1
  Separation         (cm)
                                20      20      20        20      20
   Distance
 Output Power       (dBm)      24.5    20.5    20.2       22.2   22.1
 Antenna Gain       (dBi)       4.3     4.0     4.0       6.0     6.0
   Duty Cycle        (%)       100     100     100        100    100
 Source Based       (mW)
                              753.4    283.8   264.2   657.7     648.6
      EIRP
   FCC Power      (mW/cm^2)
                               0.15    0.06    0.05       0.13   0.13
     Density
   FCC Power      (mW/cm^2)
  Density Limit                  1       1       1         1       1
    IC Power       (W/m^2)
     Density                   1.500   0.565   0.526   1.309     1.291
    IC Power       (W/m^2)
  Density Limit                 10      10      10        10      10
Fraction of Limit    (%)
                               15.0     5.6     5.3       13.1   12.9
     Sum of          51.9
  Fractions (%)




                                          Page 13 of 17
UL CCS                                                                       FORM NO: CCSUP4701H
47173 BENICIA STREET, FREMONT, CA 94538, USA           TEL: (510) 771-1000      FAX: (510) 661-0888
   This report shall not be reproduced except in full, without the written approval of UL CCS.


REPORT NO: 12U14476-12                                                    DATE: SEPTEMBER 14, 2012
EUT: 802.11 a/b/g/n 2X2 ACCESS POINT MODULE                                          MODEL: AP802




      Band            (GHz)        0.8          2.4     2.4     5       5
     Mode                         WCDMA        WLAN WLAN WLAN WLAN
  Transmitter                      Cell       Chain 0 Chain 1 Chain 0 Chain 1
  Separation          (cm)
                                     20         20         20      20        20
   Distance
 Output Power        (dBm)          23.9        20.5       20.2   22.2      22.1
 Antenna Gain         (dBi)         4.0         4.0        4.0     6.0      6.0
   Duty Cycle          (%)          100         100        100    100       100
 Source Based        (mW)
                                   618.0       283.8   264.2      657.7    648.6
      EIRP
   FCC Power      (mW/cm^2)
                                    0.12        0.06       0.05   0.13      0.13
     Density
   FCC Power      (mW/cm^2)
  Density Limit                    0.533         1          1       1        1
    IC Power        (W/m^2)
     Density                       1.230       0.565   0.526      1.309    1.291
    IC Power        (W/m^2)
  Density Limit                     5.33         10        10      10        10
Fraction of Limit     (%)
                                    23.1        5.6        5.3    13.1      12.9
     Sum of           60.0
  Fractions (%)




                                           Page 14 of 17
UL CCS                                                                       FORM NO: CCSUP4701H
47173 BENICIA STREET, FREMONT, CA 94538, USA           TEL: (510) 771-1000      FAX: (510) 661-0888
   This report shall not be reproduced except in full, without the written approval of UL CCS.


REPORT NO: 12U14476-12                                                 DATE: SEPTEMBER 14, 2012
EUT: 802.11 a/b/g/n 2X2 ACCESS POINT MODULE                                       MODEL: AP802




     Band             (GHz)     1.9    2.4     2.4     5       5
     Mode                      WCDMA WLAN WLAN WLAN WLAN
  Transmitter                   Cell Chain 0 Chain 1 Chain 0 Chain 1
  Separation          (cm)
                                  20       20      20         20      20
   Distance
 Output Power        (dBm)       23.5     20.5    20.2       22.2    22.1
 Antenna Gain         (dBi)       5.7     4.0      4.0       6.0      6.0
   Duty Cycle          (%)        100     100      100       100     100
 Source Based       (mW)
                                 824.1   283.8    264.2     657.7   648.6
      EIRP
   FCC Power      (mW/cm^2)
                                 0.16     0.06    0.05       0.13    0.13
     Density
   FCC Power      (mW/cm^2)
  Density Limit                    1       1        1         1        1
    IC Power       (W/m^2)
     Density                     1.640   0.565    0.526     1.309    1.291
    IC Power       (W/m^2)
  Density Limit                   10       10      10         10      10
Fraction of Limit    (%)
                                 16.4      5.6     5.3       13.1    12.9
     Sum of           53.3
  Fractions (%)




                                          Page 15 of 17
UL CCS                                                                        FORM NO: CCSUP4701H
47173 BENICIA STREET, FREMONT, CA 94538, USA            TEL: (510) 771-1000      FAX: (510) 661-0888
   This report shall not be reproduced except in full, without the written approval of UL CCS.


REPORT NO: 12U14476-12                                                 DATE: SEPTEMBER 14, 2012
EUT: 802.11 a/b/g/n 2X2 ACCESS POINT MODULE                                       MODEL: AP802




     Band             (GHz)       0.8      2.4     2.4     5       5
     Mode                         LTE     WLAN WLAN WLAN WLAN
  Transmitter                     Cell   Chain 0 Chain 1 Chain 0 Chain 1
  Separation          (cm)
                                  20       20      20         20      20
   Distance
 Output Power        (dBm)       23.5     20.5    20.2       22.2    22.1
 Antenna Gain         (dBi)       3.8      4.0     4.0       6.0      6.0
   Duty Cycle          (%)        100     100      100       100     100
 Source Based       (mW)
                                 542.0   283.8    264.2     657.7   648.6
      EIRP
   FCC Power      (mW/cm^2)
                                 0.11     0.06    0.05       0.13    0.13
     Density
   FCC Power      (mW/cm^2)
  Density Limit                  0.53       1       1         1        1
    IC Power       (W/m^2)
     Density                     1.079    0.565   0.526     1.309    1.291
    IC Power       (W/m^2)
  Density Limit                   5.3      10      10         10      10
Fraction of Limit    (%)
                                 20.4      5.6     5.3       13.1    12.9
     Sum of           57.3
  Fractions (%)




                                          Page 16 of 17
UL CCS                                                                        FORM NO: CCSUP4701H
47173 BENICIA STREET, FREMONT, CA 94538, USA            TEL: (510) 771-1000      FAX: (510) 661-0888
   This report shall not be reproduced except in full, without the written approval of UL CCS.


REPORT NO: 12U14476-12                                                 DATE: SEPTEMBER 14, 2012
EUT: 802.11 a/b/g/n 2X2 ACCESS POINT MODULE                                       MODEL: AP802




     Band             (GHz)       1.7      2.4     2.4     5       5
     Mode                         LTE     WLAN WLAN WLAN WLAN
  Transmitter                     Cell   Chain 0 Chain 1 Chain 0 Chain 1
  Separation          (cm)
                                  20       20      20         20      20
   Distance
 Output Power        (dBm)       23.0     20.5    20.2       22.2    22.1
 Antenna Gain         (dBi)       5.4      4.0     4.0       6.0      6.0
   Duty Cycle          (%)        100     100      100       100     100
 Source Based       (mW)
                                 683.9   283.8    264.2     657.7   648.6
      EIRP
   FCC Power      (mW/cm^2)
                                 0.14     0.06    0.05       0.13    0.13
     Density
   FCC Power      (mW/cm^2)
  Density Limit                    1        1       1         1        1
    IC Power       (W/m^2)
     Density                     1.361    0.565   0.526     1.309    1.291
    IC Power       (W/m^2)
  Density Limit                   10       10      10         10      10
Fraction of Limit    (%)
                                 13.6      5.6     5.3       13.1    12.9
     Sum of           50.5
  Fractions (%)



                                    END OF REPORT




                                          Page 17 of 17
UL CCS                                                                        FORM NO: CCSUP4701H
47173 BENICIA STREET, FREMONT, CA 94538, USA            TEL: (510) 771-1000      FAX: (510) 661-0888
   This report shall not be reproduced except in full, without the written approval of UL CCS.



Document Created: 2012-09-17 15:12:19
Document Modified: 2012-09-17 15:12:19

© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC