RF Exposure

FCC ID: LDKMICWL1717

RF Exposure Info

Download: PDF
FCCID_3775549

                         INTERTEK TESTING SERVICES

For Standalone SAR test exclusion consideration, when the corresponding SAR Exclusion
Threshold requirement in KDB 447498 is satisfied, standalone SAR evaluation for general
population exposure conditions, by measurement or numerical simulation is not required.

Description the tested model: CP-8832-MIC-WLS

 EUT Description                   :   Cisco IP Conference Phone – Wireless Mic
 Model                             :   CP-8832-MIC-WLS
 Operating Configuration(s)        :   In front of face
 Operating mode (s)                :   Voice call
 Device Category                   :   Portable Device
 Tx Frequency                      :   1921.536 – 1928.448 MHz
 Production tolerance              :   10 dBm (Minimum) to 16 dBm (Maximum)
 Antenna gain                      :   0 dBi = 1.00 (num gain)
 Maximum source-based time-
                                   :   4.2% = (1/24 x100%)
 averaging duty factor
 Minimum separation distance       :   5 mm
                                       FCC KDB 447498 D01
 Applicable FCC KDB                :
                                       FCC KDB 865664 D02

From above data, the source-based time-averaging output power is as follow:

             The Maximum Conducted Power            = 16 dBm
                                                    = 39.8 mW

         The Maximum conducted Power source-based time-averaging output power

                                                    = (39.8 * 0.042) mW
                                                    = 1.67 mW
In the frequency range of 100MHz to 6GHz and test separation distance ≤ 50mm, the SAR
Exclusion Threshold will be determined as follow,

         The SAR exclusion threshold        = (3.0 × TD ) / F (GHz )
                                            = 10.80 mW

         where TD = 5 mm and F(GHz) = 1.928 GHz


Conclusion

Since the calculated conducted source-based time-averaged output power is 1.67 mW,
which is less than the SAR Exclusion Threshold at 5mm test separation distance 10.80 mW
for general population and uncontrolled exposure, standalone SAR evaluation for general
population exposure conditions, by measurement or numerical simulation is not required.


 FCC ID: LDKMICWL1717
                                                                       RF exposure - 1 of 1



Document Created: 2018-03-05 16:39:27
Document Modified: 2018-03-05 16:39:27

© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC