RF Exposure Info

FCC ID: LDKDX700976

RF Exposure Info

Download: PDF
FCCID_2342731

Model Number: CP-DX70 Desktop TelePresence                                               EDCS # 1401425




                             RF Exposure Study - Engineering Analysis per

                                                     FCC 2.1093

                                           Industry Canada RSS-102

                                   Australian ARPANSA Requirements

                                           New Zealand Regulations


                                                     CP-DX70
                                               Desktop Telepresence
                              FCC ID : LDKDX700976 IC: 2461B- DX700976

             Supplementary Appendix to Reports EDCS-1394241, EDCS-1401017




                 Prepared By: Allan Beecroft
                              Cisco Systems Inc
                              170 West Tasman
                              San Jose, CA 95134
                              USA



This report shall not be reproduced except in full without written permission by Cisco Systems Inc


Model Number: CP-DX70 Desktop TelePresence                                               EDCS # 1401425




1.0: Attestation Statement of Compliance

 The Cisco Systems Inc CP-DX70 Series desktop TelePresence has been evaluated for Maximum
 Permissible Exposure in compliance with 47 Code of Federal Regulations 2.1093. The evaluation was
 in accordance with methodology as referenced in FCC Bulletin OET 65C (rev 01-01).

 This report serves as the technical analysis of Cisco of the radios in the CP-DX80 series. The technical
 information referenced for this study was derived from the FCC / Canada test report on the product.

 For purposes of this study, the evaluation was only done with the worse case antennae for each
 programmable power level.

 The limits used for this evaluation are in line with the recommendations of the World Health
 Organizations (WHO) International Committee on Non Ionizing Radiation Protection (ICNIRP) as well
 as the American National Standards Institute (ANSI) C95.1.

 This analysis also complies with the requirements stated in Industry Canada RSS-102 as well as the
 applicable Australian and New Zealand regulations.



_______________________________________________
Allan Beecroft
Technical Leader,
Cisco Systems Inc
170 W Tasman Dr
San Jose, CA 93727
Phone: 408.527.9787
Email: abeecrof@cisco.com



2.0 EUT Description

This is a Cisco DX-70 video-capable desktop TelePresence endpoint which contains an 802.11a/b/g/n
radio and an 802.15 Bluetooth Ver. 3.0 + EDR Radio.




This report shall not be reproduced except in full without written permission by Cisco Systems Inc


Model Number: CP-DX70 Desktop TelePresence                                               EDCS # 1401425




3.0 Methodology
All calculations were made in accordance with ANSI C95.1, and FCC OET 65C.


4.0 Technical Requirements

        4.1 Single Band Operation – Limits

     As referenced by OET 65C / RSS-102

(B) Limits for General Population/Uncontrolled Exposure


   Frequency            Electric Field        Magnetic Field         Power Density        Averaging Time
     Range              Strength (E)          Strength (H)               (S)               |E|2, |H|2 or S
     (MHz)                 (V/m)                  (A/m)                (mW/cm2)              (minutes)

    0.3-1.34                 614                   1.63                  (100)*                  30
    1.34-30                 824/f                 2.19/f                (180/f2)*                30
    30-300                  27.5                  0.073                   0.2                    30
    300-1500                  --                     --                  f/1500                  30
  1500-100,000                --                     --                    1.0                   30

                              f = frequency in MHz        *Plane-wave equivalent power density

NOTE 1: See Section 1 for discussion of exposure categories.

NOTE 2: The averaging time for General Population/Uncontrolled exposure to fixed transmitters is not
        applicable for mobile and portable transmitters. See 47 CFR §§2.1091 and 2.1093 on source-
        based time-averaging requirements for mobile and portable transmitters.




This report shall not be reproduced except in full without written permission by Cisco Systems Inc


Model Number: CP-DX70 Desktop TelePresence                                                    EDCS # 1401425

Excerpt from Australian Radiation Protection Standard

  REFERENCE LEVELS FOR TIME AVERAGED EXPOSURE TO
  RMS ELECTRIC AND MAGNETIC FIELDS (UNPERTURBED
                      FIELDS)
Exposure         Frequency                 E-field          H-field          Equivalent plane
category         range                    strength         strength          wave power flux
                                         (V/m rms)        (A/m rms)            density Seq
                                                                                 (W/m2)


Occupational     100 kHz – 1 MHz        614               1.63 / f          —
                 1 MHz – 10 MHz         614 / f           1.63 / f          1000 / f 2 (see note 5)
                 10 MHz – 400 MHz       61.4              0.163                   10      (see note 5)
                 400 MHz – 2 GHz          3.07 × f 0.5    0.00814 × f 0.5   f/ 40
                 2 GHz – 300 GHz        137               0.364                 50


General public   100 kHz – 150 kHz      86.8              4.86                       —
                 150 kHz – 1 MHz        86.8              0.729 / f                  —
                   1 MHz – 10 MHz         86.8 / f 0.5    0.729 / f                  —
                 10 MHz – 400 MHz       27.4              0.0729                     2   (see note 6)
                                                                            f/
                 400 MHz – 2 GHz          1.37 × f 0.5    0.00364 × f 0.5
                                                                            200
                 2 GHz – 300 GHz        61.4              0.163                   10




5.0 Calculations
The Power Density (mW/cm2) is calculated as follows:

S = PG(Duty Cycle) / 4πR2

Where:
S = power density (in appropriate units, e.g. mW/cm2)
P = power input to the antenna (in appropriate units, e.g., mW)
G = power gain of the antenna in the direction of interest relative to an isotropic radiator
R = distance to the center of radiation of the antenna (appropriate units, e.g., cm)




This report shall not be reproduced except in full without written permission by Cisco Systems Inc


Model Number: CP-DX70 Desktop TelePresence                                                                                                           EDCS # 1401425




6.0 Results



                                                                                     Peak	
  
                                                                   MPE	
                                                                            Power	
  
                                                                                   Transmit	
       Antenna	
                                                       Limit	
  
                 Frequency	
  (MHz)	
                            Distance	
                                                Duty	
  Cycle	
          Density	
                       %	
  of	
  Std	
  
                                                                                    Power	
         Gain	
  (dBi)	
                                                 (cm)	
  
                                                                   (cm)	
                                                                         (mW/cm^2)	
  
                                                                                    (dBm)	
  
     TX	
  
     TX1	
     2412-­‐2462	
  	
  (Wi-­‐Fi)	
                             20	
          15.72	
                  2.6	
                    1	
            0.01	
             1	
                          0.01	
  

     TX1	
     2402-­‐2480	
  	
  	
  	
  	
  	
  	
  (BT)	
              20	
          05.57	
                  2.6	
                    1	
           0.001	
             1	
                     0.001	
  

     TX3	
     5150-­‐5250	
  	
  	
  (Wi-­‐Fi)	
                         20	
          15.50	
                  3.3	
                    1	
            0.02	
             1	
                          0.02	
  

     TX3	
      5250-­‐5350	
  	
  (Wi-­‐Fi)	
                            20	
          15.93	
                  3.1	
                    1	
            0.02	
             1	
                          0.02	
  

     TX3	
      5470-­‐5725	
  	
  (Wi-­‐Fi)	
                            20	
          15.88	
                  3.5	
                    1	
            0.02	
             1	
                          0.02	
  

     TX3	
      5745-­‐5825	
  	
  (Wi-­‐Fi)	
                            20	
          15.09	
                  4.0	
                    1	
            0.02	
             1	
                          0.02	
  



Calculations with additional transmitters
The wifi radio operates in either the 2.4GHz or 5GHz Band but not both at the same time. Bluetooth may be used
with either wi-fi band.




This report shall not be reproduced except in full without written permission by Cisco Systems Inc


Model Number: CP-DX70 Desktop TelePresence                                                                     EDCS # 1401425

Scenario 1 :
Bluetooth and 2.4GHz Radio

TX1 + TX2 = % standard
20     = d (estimate)

 TX1	
                                                             TX2	
                    Total	
  
                                                        0.01	
               0.001	
               0.011	
  
 	
  	
  	
  	
  	
  	
  	
  	
  	
  	
  	
  	
  	
  
                        	
                                                                  	
  
Distance (estimate) = 2.10   cm                                                  < 20cm (Passed)



Scenario 2 :
Bluetooth and 5GHz Radio

TX1 + TX2 = % standard
20     = d (estimate)

 TX1	
                                                             TX2	
                    Total	
  
                                                        0.02	
               0.001	
             0.021	
  
Distance (estimate) = 2.90 cm                                                    < 20cm (Passed)


The configuration above co-location calculation is for the General population /Uncontrolled exposure.
The minimum recommended distance is 20 cm when all antenna’s are within 20 cm boundary.




This report shall not be reproduced except in full without written permission by Cisco Systems Inc



Document Created: 1080-11-04 00:00:00
Document Modified: 1080-11-04 00:00:00

© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC