Regulatory Compliance Statement

FCC ID: LDKC11111696

Users Manual

Download: PDF
FCCID_3890974

Draft of FCC and Canada Statements FCC Supplier Declaration of Conformity This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications.  This device may not cause harmful interference  This device must accept any interference received, including interference that may cause undesired operation Operation of this equipment in a residential area is likely to cause harmful interference in which case, users will be required to correct the interference at their own expense. Radio Compliance This system uses both licensed and licensed exempt radio frequencies. The radios have been evaluated to the following The Wi-Fi Radio has been evaluated to 47 Code of Federal Regulations Part 15.247 and Part 15.407. Part 15 Radio Systems operating outdoors in the 5150-5250 MHz band must comply with the antenna installation requirements as set forth in the FCC Part 15.407 rules. The LTE radio has been evaluated to 47 Code of Federal Regulation Part 24 and 27. The LTE radio operates on licensed frequency bands and requires a radio license to operate. It must be operated under the control of a Licensed Service Provider or Wireless Carrier. Modifications by user or installer Modifying the equipment without Cisco’s authorization may result in the equipment no longer complying with FCC requirements for Class A digital devices. In that event, your right to use the equipment may be limited by FCC regulations, and you may be required to correct any interference to radio or television communications at your own expense. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. RF Exposure Compliance

Draft of FCC and Canada Statements FCC RF Exposure Compliance This product has been found to be compliant to the requirements set forth in CFR 47 Section 1.1307 addressing RF Exposure from radio frequency devices as defined in Evaluating Compliance with FCC Guidelines for Human Exposure to Radio Frequency Electromagnetic Fields. To maintain compliance, the minimum separation distance from the antenna to general bystander is 20 cm (7.87 inches) or more from the body of all persons. . Canada EMC This Class A digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada Radio (Wi Fi) This product complies with RSS-247 of the Industry Canada Rules. Operation is subject to the following two conditions:  This device may not cause harmful interference  This device must accept any interference received, including interference that may cause undesired operation Ce dispositif est conforme à la norme RSS-247 d'Industrie Canada applicable aux appareils radio exempts de licence. Son fonctionnement est sujet aux deux conditions suivantes:  le dispositif ne doit pas produire de brouillage préjudiciable  ce dispositif doit accepter tout brouillage reçu, y compris un brouillage susceptible de provoquer un fonctionnement indésirable The device for operation in the band 5150–5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite system; For devices with detachable antenna(s), the maximum antenna gain permitted for devices in the bands 5250-5350 MHz and 5470-5725 MHz shall be such that the equipment still complies with the e.i.r.p. limit;

Draft of FCC and Canada Statements For devices with detachable antenna(s), the maximum antenna gain permitted for devices in the band 5725-5850 MHz shall be such that the equipment still complies with the e.i.r.p. limits as appropriate; and For systems that are capable of operating outdoors or with antennas mounted outdoors where applicable antenna type(s), antenna models(s), and worst-case tilt angle(s) necessary to remain compliant with the e.i.r.p. elevation mask requirement set forth in section 6.2.2.3 shall be clearly indicated. LTE This product complies with the RSS-130, RSS-132, RSS-133, RSS-139, RSS-195, RSS-199 of the Industry Canada Rules. Radiation Exposure Statement This equipment complies with IC radiation exposure limits set forth in an uncontrolled environment. This equipment should be installed and operated with minimum distance 20 cm (7.87 in.) between the radiator and your body. Déclaration D'exposition Aux Radiations Cet équipement est conforme aux limites d'exposition aux rayonnements IC établies pour un environnement non contrôlé. Cet équipement doit être installé et utilisé avec un minimum de 20 cm (7.87 in.) de distance entre la source de rayonnement et votre corps. Was this Document Helpful?


Document Created: 2019-03-23 13:44:43
Document Modified: 2019-03-23 13:44:43
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC