MPE Calculation

FCC ID: LDKC11011757

RF Exposure Info

Download: PDF
FCCID_4279166

                                                              MPE CALCULATION
                                                              FCC ID: LDKC11011757
                                                          Host Model: C1121X-8PLTEPWB



RF Exposure Requirements:                                                              47 CFR §1.1307(b)
RF Radiation Exposure Limits:                                                          47 CFR §1.1310
RF Radiation Exposure Guidelines:                                                      FCC OST/OET Bulletin Number 65

EUT Frequency Band:                                                                    2412-2462 MHz, 5150-5250 MHz,
                                                                                       5470-5725 MHz, 5725-5850 MHz
Limits for General Population/Uncontrolled Exposure in the band of:                    1500-100,000 MHz
Power Density Limit:                                                                   1 mW / cm2


Equation:           S = PG / 4πR2 or R = √PG / 4πS
         Where,     S = Power Density
                    P = Power Input to Antenna
                    G = Antenna Gain
                    R = distance to the center of radiated antenna
______________________________________________________________________________________________________________________
EUT: Cisco Wireless Router, Model No.: C1121X-8PLTEPWB
Internal PIFA Antenna

Prediction distance 20cm
(WLan 2.4GHz): Power = 20 dBm, Antenna Gain = 2.14 dBi, Directional Gain = 5.14 dBi, Power density = 0.0818 mW/cm2
(WLan 5GHz): Power = 20.7 dBm, Antenna Gain = 4 dBi, Directional Gain = 7 dBi, Power density = 0.148 mW/cm2
               CH     Conducted Antenna Directiona                         Tolerance                        Calculated     MPE
                                                             Tune-Up       Max Power      Measurement
              Freq      Power     Gain        l Gain                                                           MPE         Limit    Pass/
 Type                                                       Tolerance         (dBm)       Distance (cm)
             (MHz)      (dBm)     (dBi)        (dBi)                                                        (mW/cm2)     (mW/cm2)    Fail
WLAN
            2462          20            2.14       5.14*             ±1dB        21                 20        0.0818        1       Pass
2.4GHz
WLAN
            5795          20.7           4           7*              ±1dB       21.7                20        0.148         1       Pass
5GHz
*Correlated Gain.

Co-location worse case:

2.4GHz WLAN = (0.0818/1) x 100% = 8.18%
5 GHz WLAN = (0.148/1) x 100% = 14.8%


Total MPE Percentage = (8.18+14.8) % = 22.98%< 100%

The Above Result had shown that the device complied with MPE requirement at a prediction distance of 20cm.




Completed By: Deon Dai
SIEMIC, Inc
775 Montague Expressway, Milpitas, CA 95035
Phone: (408) 526-1188
Date: 04/10/2019



Document Created: 2019-04-22 11:45:21
Document Modified: 2019-04-22 11:45:21

© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC