User Guide

FCC ID: LDK9KG80001

Users Manual

Download: PDF
FCCID_1789040

IMPORTANT SAFETY INSTRUCTIONS Notice to Installers The servicing instructions in this notice are for use by qualified service personnel only. To reduce the risk of electric shock, do not perform any servicing other than that contained in the operating instructions, unless you are qualified to do so. Note to System Installer For this apparatus, the coaxial cable shield/screen shall be grounded as close as practical to the point of entry of the cable into the building.For products sold in the US and Canada, this reminder is provided to call the system installer's attention to Article 820-93 and Article 820-100 of the NEC (or Canadian Electrical Code Part 1), which provides guidelines for proper grounding of the coaxial cable shield. CAUTION: To reduce the risk of electric shock, do not remove cover (or back). No user-serviceable parts inside. Refer servicing to qualified service personnel. WARNING TO PREVENT FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. This symbol is intended to alert you that uninsulated voltage within this product may have sufficient magnitude to cause electric shock.Therefore, it is dangerous to make any kind of contact with any inside part of this product. Ce symbole a pour but d’alerter toute personne qu’un contact This symbol is intended to alert you of the presence of important avec une pièce interne de ce produit, sous tension et non isolée, operating and maintenance (servicing) instructions in the literature pourrait être suffisant pour provoquer un choc électrique. Il est accompanying this product. donc dangereux d’être en contact avec toute pièce interne de Ce symbole a pour but de vous avertir qu’une documentation ce produit. importante sur le fonctionnement et l’entretien accompagne ce produit. 20080814_Installer820 1) Read these instructions. 12) Use only with the cart, stand, 2) Keep these instructions. tripod, bracket, or table specified by the manufacturer, 3) Heed all warnings. or sold with the apparatus. 4) Follow all instructions. When a cart is used, use caution when moving the cart/apparatus combination 5) Do not use this apparatus near water. to avoid injury from tip-over. 6) Clean only with dry cloth. 13) Unplug this apparatus during lightning 7) Do not block any ventilation openings. storms or when unused for long periods Install in accordance with the of time. manufacturer’s instructions. 14) Refer all servicing to qualified service 8) Do not install near any heat sources such personnel. Servicing is required when as radiators, heat registers, stoves, or the apparatus has been damaged in any other apparatus (including amplifiers) way, such as a power-supply cord or that produce heat. plug is damaged, liquid has been spilled 9) Do not defeat the safety purpose of the or objects have fallen into the apparatus, polarized or grounding-type plug. A the apparatus has been exposed to rain polarized plug has two blades with one or moisture, does not operate normally, wider than the other. A grounding-type or has been dropped. plug has two blades and a third grounding prong. The wide blade or the third prong Power Source Warning are provided for your safety. If the A label on this product indicates the correct provided plug does not fit into your outlet, power source for this product. Operate this consult an electrician for replacement of product only from an electrical outlet with the the obsolete outlet. voltage and frequency indicated on the product label. If you are uncertain of the type of power 10) Protect the power cord from being supply to your home or business, consult your walked on or pinched particularly at service provider or your local power company. plugs, convenience receptacles, and the point where they exit from the apparatus. The AC inlet on the unit must remain accessible and operable at all times. 11) Only use attachments/accessories specified by the manufacturer.

Ground the Product Eliminate AC Power/Mains Overloads WARNING: Avoid electric shock and fire hazard! If this product connects WARNING: Avoid electric shock and to coaxial cable wiring, be sure the cable fire hazard! Do not overload AC power/ system is grounded (earthed). Grounding mains, outlets, extension cords, or integral provides some protection against voltage convenience receptacles. For products surges and built-up static charges. that require battery power or other power sources to operate them, refer to the operating instructions for those products. Outdoor Grounding System If this product connects to an outdoor antenna Handling Disposable Batteries or cable system, be sure the antenna or cable system is grounded (earthed). This provides This product may contain disposable batteries. some protection against voltage surges and Heed the following warning and follow the Battery built-up static charges. Safety and Battery Disposal instructions below. Article 810 of the National Electric Code (NEC) ANSI/NFPA No. 70-1990, provides the following information: WARNING: There is danger of explosion if the battery is mishandled or • Grounding of the mast and supporting structure incorrectly replaced. Replace only with the • Grounding the lead-in wire to an antenna same type of battery. Do not disassemble discharge unit it or attempt to recharge it outside the system. Do not crush, puncture, dispose • Size of the grounding conductors of in fire, short the external contacts, or • Location of the antenna-discharge unit expose to water or other liquids. Dispose • Connection to grounding electrodes of the battery in accordance with local regulations and instructions from your • Requirements for the grounding electrodes (see service provider. the following antenna grounding diagram as recommended by NEC ANSI/NFPA 70) Battery Safety • Insert batteries correctly. There may be a risk of WARNING: Avoid electric shock and explosion if the batteries are incorrectly inserted. fire hazard! Do not locate an outside antenna • Do not attempt to recharge ‘disposable’ or ‘non- system in the vicinity of overhead power lines reusable’ batteries. or power circuits. Touching power lines or circuits might be fatal. • Please follow instructions provided for charging ‘rechargeable’ batteries. • Replace batteries with the same or equivalent type that we recommend. • Do not expose batteries to excessive heat (such as sunlight or fire). • Do not expose batteries to temperatures above 100°C (212°F). Battery Disposal • The batteries may contain substances that could be harmful to the environment. • Recycle or dispose of batteries in accordance T11518 with the battery manufacturer’s instructions and Protect the Product from Lightning local/national disposal and recycling regulations. In addition to disconnecting the AC power from the wall outlet, disconnect the signal inputs. • The batteries may contain perchlorate, a known Verify the Power Source from the hazardous substance, so special handling and Power Light disposal of this product might be necessary. For more information about perchlorate and When the power light on the front panel is not best management practices for perchlorate- illuminated, the apparatus may still be connected containing substance, see www.dtsc.ca.gov/ to the power source. The light may go out when hazardouswaste/perchlorate the apparatus is turned off, regardless of whether it is still plugged into an AC power source.

Provide Ventilation and Select a Check Product Safety Location Upon completion of any service or repairs to this • Remove all packaging material before applying product, the service technician must perform power to the product. safety checks to determine that this product is in proper operating condition. • Do not place this apparatus on a bed, sofa, rug, or similar surface. Protect the Product When Moving It • Do not place this apparatus on an unstable Always disconnect the power source when surface. moving the apparatus or connecting or disconnecting cables. • Do not install this apparatus in an enclosure, 20110316_IP Gateway_Safety such as a bookcase or rack, unless the installation provides proper ventilation. United States FCC Compliance This device has been tested and found to • Do not place entertainment devices (such as comply with the limits for a Class B digital VCRs or DVDs), lamps, books, vases with liquids, device, pursuant to part 15 of the FCC Rules. or other objects on top of this product. These limits are designed to provide reasonable • Do not block ventilation openings. protection against such interference in a residential installation. This equipment generates, Operating Environment uses, and can radiate radio frequency energy. The gateway is designed for operation indoors If not installed and used in accordance with the with a temperature range from 32° to 104° F (0° instructions, it may cause harmful interference to 40°C). Each gateway should have adequate to radio communications. However, there is spacing on all sides so that the cooling air vents no guarantee that interference will not occur on the chassis are not blocked. in a particular installation. If this equipment does cause harmful interference to radio or Protect from Exposure to Moisture television reception, which can be determined by and Foreign Objects turning the equipment OFF and ON, the user is encouraged to try to correct the interference by one or more of the following measures: WARNING: Avoid electric shock and • Reorient or relocate the receiving antenna. fire hazard! Do not expose this product • Increase the separation between the equipment to dripping or splashing liquids, rain, or and receiver. moisture. Objects filled with liquids, such • Connect the equipment into an outlet on a as vases, should not be placed on this circuit different from that to which the receiver apparatus. is connected. • Consult the service provider or an experienced radio/television technician for help. WARNING: Avoid electric shock and Any changes or modifications not expressly fire hazard! Unplug this product before approved by Cisco Systems, Inc., could void the cleaning. Do not use a liquid cleaner or an user’s authority to operate the equipment. aerosol cleaner. Do not use a magnetic/ static cleaning device (dust remover) to Cisco Explorer 9800 Multi-Screen clean this product. Gateway Series Models: 9825HDC, 9835HDC, 9842HDC, 9845HDC, 9855HDC, 9862HDC, 9865HDC, WARNING: Avoid electric shock and 9845HD, 9865HD fire hazard! Never push objects through the Manufactured by: openings in this product. Foreign objects Cisco Systems, Inc. can cause electrical shorts that can result in 5030 Sugarloaf Parkway electric shock or fire. Lawrenceville, Georgia 30044 USA Telephone: 770 236-1077 Service Warnings The information shown in the FCC Declaration of Conformity paragraph below is a requirement WARNING: Avoid electric shock! Do of the FCC and is intended to supply you with not open the cover of this product. Opening information regarding the FCC approval of or removing the cover may expose you to this device. The phone numbers listed are for dangerous voltages. If you open the cover, FCC-related questions only and not intended for your warranty will be void. This product questions regarding the connection or operation contains no user-serviceable parts. for this device. Please contact your service provider for any questions you may have regarding the operation or installation of this device.

ROVI CORPORATION COPYRIGHT Declaration of Conformity NOTICE This device complies with Part 15 of FCC Rules. Operation is subject to the following two This product incorporates copyright protection conditions: 1) the device may not cause harmful technology that is protected by U.S. patents interference, and 2) the device must accept any and other intellectual property rights of Rovi interference received, including interference that Corporation. Use of this copyright protection may cause undesired operation. technology must be authorized by Rovi Corporation, and is intended for home and other limited viewing uses only unless otherwise Canada EMI Regulation authorized by Rovi Corporation. Reverse This Class B digital apparatus complies with engineering and disassembly are prohibited. Canadian ICES-003. Cet appareil numérique de la class B est Open Source GNU GPL Statement conforme à la norme NMB-003 du Canada. Cisco Explorer 9800 Multi-Screen Gateway Series contain(s), in part, certain free/open AVC VIDEO LICENSE source software (“Free Software”) under With respect to each AVC/H.264 product, we are licenses which generally make the source obligated to provide the following notice: code available for free copy, modification, and redistribution. Examples of such licenses include THIS PRODUCT IS LICENSED UNDER THE all the licenses sponsored by the Free Software AVC PATENT PORTFOLIO LICENSE FOR THE Foundation (e.g. GNU General Public License PERSONAL USE OF A CONSUMER OR OTHER (GPL), GNU Lesser General Public License USES IN WHICH IT DOES NOT RECEIVE (LGPL), Berkeley Software Distribution (BSD), REMUNERATION TO (i) ENCODE VIDEO IN the MIT licenses and different versions of the COMPLIANCE WITH THE AVC STANDARD (“AVC Mozilla and Apache licenses). To find additional VIDEO”) AND/OR (ii) DECODE AVC VIDEO THAT information regarding the Free Software, WAS ENCODED BY A CONSUMER ENGAGED IN including a copy of the applicable license A PERSONAL ACTIVITY AND/OR WAS OBTAINED and related information, please go to: (i) for FROM A VIDEO PROVIDER LICENSED TO PROVIDE North America http://www.cisco.com/web/ AVC VIDEO. NO LICENSE IS GRANTED OR SHALL consumer/support/open_source.html, or (ii) BE IMPLIED FOR ANY OTHER USE. ADDITIONAL for outside North America http://www.cisco. INFORMATION MAY BE OBTAINED FROM MPEG com/web/consumer/support/open_source. LA, L.L.C. SEE HTTP://WWW.MPEGLA.COM. html#~international. Once at the site, search Accordingly, please be advised that service for the product listing and click on the related providers, content providers, and broadcasters items identified. If you have any questions or may be required to obtain a separate use license problems accessing any of the links, please from MPEG LA prior to any use of AVC/H.264 contact: spvtg-external-opensource- encoders and/or decoders. requests@cisco.com. Cisco Systems, Inc. 678 277-1120 5030 Sugarloaf Parkway, Box 465447 800 722-2009 Lawrenceville, GA 30042 www.cisco.com Cisco and the Cisco logo are trademarks or registered trademarks of Cisco and/or its affiliates in the U.S. and other countries. A listing of Cisco’s trademarks can be found at www.cisco.com/go/trademarks. Rovi is a trademark of Rovi Corporation. Other third party trademarks mentioned are the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any other company. (1009R) © 2011 Cisco and/or its affiliates All rights reserved. December 2011 Part Number 4041467 Rev A


Document Created: 2012-08-14 15:28:59
Document Modified: 2012-08-14 15:28:59
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC