TCB Q and A

FCC ID: LDK102064

Cover Letter(s)

Download: PDF
FCCID_814591

http://mail.google.com/mail/?view=page&name=gp&ver=sh3fib53pgpk answer: Cisco Systems, Inc., FCC ID: LDK102064, Assessment NO.: AN07T6755, Notice#1 Inbox from Claire Hoque <claire.hoque@ccsemc.com> hide details Apr 30 (2 days ago) Reply to "Timothy M. Dwyer" <tim.dwyer@ccsemc.com> date Apr 30, 2007 12:17 PM subject answer: Cisco Systems, Inc., FCC ID: LDK102064, Assessment NO.: AN07T6755, Notice#1 Hi Tim, Pls see answers below, pls note the defer date is June 15, 2007. Thanks, Claire Hoque -----Original Message----- From: Timothy M. Dwyer Sent: Friday, April 27, 2007 2:55 PM To: Claire Hoque Cc: Timothy M. Dwyer Subject: Cisco Systems, Inc., FCC ID: LDK102064, Assessment NO.: AN07T6755, Notice#1 Hello Claire, The review is complete and there are only minor items as shown below. I am sending this to you instead of applicant as yourequested. Please email if you have questions. Q1: Current FCC rules for modular approval require the device to be tested in a "stand-alone" configuration. Since this test was carried out in a host device, the grant would normally be issued as a Limited Modular Approval, which appears to be consistent with the intent of the modular request letter. However, FCC 07-56 ET Docket No. 03-201 released April 23, 2007, but not yet published in the FR, provides for a new modular approval known as a Split Modular Approval. If it is Cisco's intent to apply for a Split Modular Approval, please consult the new rulemaking and revise the modular approval request to include the additional information required by the newly added section 15.212(a)(iv). Note that the revised rules become effective 3o days after publication in the FR. <answer>Cisco prefers to have the grant listed as a limited modular approval. Q2: The test report must specify the measurement procedures used. Please refer to the list of measurement procedures at http://www. fcc.gov/oet/ea/eameasurements.html and revise or amend the test report to specify the test procedures used. At minimum the test report must state that the procedures of ANSI C63.4:2003 were used. Specific reference to "Measurement of Digital Transmission Systems Operating under Section 15.247", March 23, 2005 is recommended as well. <answer>The procedures of ANSI C63.4:2003 and "Measurement of Digital Transmission Systems Operating under Section 15.247", March 23, 2005 were used. Best regards, Tim Dwyer The items indicated above must be submitted before processing can continue on the above referenced application. Failure to provide the requested information within 30 days of the original e-mail date may result in application dismissal and forfeiture of the filing fee. Also, please note that partial responses increase processing time and should not be submitted. Any questions about the content of this correspondence should be directed to the e-mail address listed below the name of the sender. http://mail.google.com/mail/?view=page&name=gp&ver=sh3fib53pgpk5/2/2007 1:23:37 PM


Document Created: 2007-05-02 13:23:37
Document Modified: 2007-05-02 13:23:37
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC