Alignment Procedure

FCC ID: LDK102040

Parts List/Tune Up Info

Download: PDF
FCCID_103201

Mercury Spread Spectrum Transceiver Alignment Procedures Set power out: put radio in TX mode, use power meter to set power out. D)TX on,ch 12—84: set power amp output power by adjusting voltage to the IF attenuator in the tx chain. This is done by software, which changes the DAC voltage output. TX power out; set power to +20dBm + 1dB /—1 dB for highest power setting. The lowest power setting is set to +0dBm +1dB/—1dBm. Cisco Confidential 5 4/13/00


Document Created: 2000-06-01 14:36:38
Document Modified: 2000-06-01 14:36:38
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC