User manual

FCC ID: LDK-RAN201

Users Manual

Download: PDF
FCCID_1347501

USER GUIDE Wireless-N Home ADSL2 + Modem Router Models: RAN201

About This Guide About This Guide Copyright and Trademarks Linksys, Cisco and the Cisco Logo Icon Descriptions are registered trademarks or trademarks of Cisco Systems, Inc. While reading through the User Guide you may see and/or its affiliates in the U.S. and certain various icons that call attention to specific items. Below is other countries. Other brands and product a description of these icons: names are trademarks or registered trademarks of their respective holders. NOTE: This check mark indicates that there is Copyright © 2009 Cisco Systems, Inc. All a note of interest and is something that you rights reserved. should pay special attention to while using the product. WARNING: This exclamation point indicates that there is a caution or warning of potential risk of bodily injury and/or it is something that could damage your property or product. WEB: This globe icon indicates a noteworthy website address or e-mail address. Online Resources Website addresses in this document are listed without http:// in front of the address because most current web browsers do not require it. If you use an older web browser, you may have to add http:// in front of the web address. Resource Website Linksys www.linksysbycisco.com Linksys www.linksysbycisco.com/international International Glossary www.linksysbycisco.com/glossary Network www.linksysbycisco.com/security Security Web Technical www.linksysbycisco.com/support Support i

Table of Contents Chapter 1: Product Overview 1 Front Panel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Back Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Placement Positions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Chapter 2: Wireless Security Checklist 3 General Network Security Guidelines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Additional Security Tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Chapter 3: Advanced Configuration 4 How to Access the Utility. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Using the Utility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 List of Screens in the Utility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Setup Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Wireless Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Storage Tab (WAG320N Only) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Security Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Access Restrictions Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Applications & Gaming Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Administration Tab. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Status Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Appendix A: Troubleshooting 8 Appendix B: Specifications 9R RAN201 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Appendix C: Regulatory Information 11 European Union . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11 Australia . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18 New Zealand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18 United States of America . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18 Canada . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20 ii

Chapter 1 Product Overview Chapter 1: USB (WAG320N only) (Green) The USB LED lights up when a USB device is connected to the Product Overview Modem Router through the USB port. Wireless (Green) The Wireless LED lights up Thank you for choosing the Wireless ADSL2+ Modem when the wireless feature is enabled. It flashes Router. This device lets you access the Internet via a when the Modem Router is actively sending or wireless connection or through one of its four switched receiving data over the network. ports. You can also use it to share resources such as DSL (Green) The DSL LED lights up whenever computers, printers and files. A variety of security features, there is a successful DSL connection. The LED such as WPA2™ security, a Stateful Packet Inspection (SPI) flashes green while the Modem Router is firewall and NAT technology, help to protect your data establishing the ADSL connection. and your privacy while online. Configuration is easy using Internet The Internet LED lights up the provided browser-based utility. green and stays on when a connection is made through the Internet port. It flashes to indicate Front Panel network activity over the Internet port. The LED is lit red when an authentication error occurs. Back Panel Power (RA R N201: Green/Amber; WAG160N v2 and WAG320N: Green/Red) The Power LED is continuously lit green while the device is powered on. The LED is lit amber (RA R N201) DSL The DSL port connects to the ADSL line. or red (WAG160N v2 and WAG320N) if a POST (Power On Self Test) failure or device malfunction occurs. Ethernet 4, 3, 2, 1 The Ethernet ports (4, 3, 2, 1) connect the Modem Router to wired computers Ethernet 1-4 (Green) These numbered LEDs, and other Ethernet network devices. one for each of the numbered ports on the Modem Router’s back panel, serve two purposes. NOTE: The Ethernet 1 port can If the LED is continuously lit, the Modem Router is also be configured as the WAN successfully connected to a device through that port. To do this, access the Web- port. It flashes to indicate network activity over based utility (refer to “Chapter p 3: that port. Advanced Configuration” g on p page g 4), NOTE: The Ethernet 1 LED is lit amber then select the Setup > Ethernet tab. when the WAN link is established on that port. USB (WAG320N only) The USB port connects the Modem Router to a hard drive or flash- Wi-Fi Protected Setup™ Button (RA R N201: based USB storage device. Green/Amber; WAG160N v2 and WAG320N: Reset There are two ways to reset the Modem Green) Press this button to have Wi-Fi Protected Router’s factory defaults. Either press and Setup™ search for your Wi-Fi Protected hold the Reset button for approximately five Setup™-supported wireless device. The LED is seconds, or restore the defaults from the continuously lit green when a Wi-Fi Protected Administration > Factory Defaults screen of the Setup™ connection is successfully established. Modem Router’s web-based utility. The LED blinks slowly while Wi-Fi Protected Power The Power port is where you will connect Setup™ is setting up a connection, and is lit amber the power adapter. (RA R N201) or blinks rapidly (WAG160N v2 and WAG320N) if an error occurs. The LED is off when On/Off Button Press the On/Off button to turn Wi-Fi Protected Setup™ is idle. power to the device on or off. NOTE: Wi-Fi Protected Setup™ is a feature that makes it easy to configure your wireless network and its security settings. 1

Chapter 1 Product Overview Placement Positions Follow these instructions: 1. Determine where you want to mount the device. Make There are two ways to physically install the device. The sure that the wall you use is smooth, flat, dry, and first way is to place the device horizontally on a surface. sturdy. Also make sure the location is within reach of The second way is to mount the device on a wall. an electrical outlet. The best place for the device is usually at the center of 2. Drill two holes into the wall. Make sure the holes are your wireless network, within range of all of your wireless 152 mm (6 inches) apart. devices. 3. Insert a screw into each hole and leave 3 mm Horizontal Placement (0,12 inches) of its head exposed. 4. Maneuver the device so the wall-mount slots line up The device has four rubber feet on its bottom panel. Place with the two screws. the device on a level surface near an electrical outlet. 5. Place the wall-mount slots over the screws and slide Wall-Mounting Placement the device down until the screws fit snugly into the wall-mount slots. The device has two wall-mount slots on its bottom panel. The distance between the slots is 152 mm (6 inches). Two screws are needed to mount the device. Suggested Mounting Hardware 2,5-3,0 mm 4-5 mm 1-1,5 mm †Note: Mounting hardware illustrations are not true to scale. NOTE: Cisco is not responsible for damages incurred by insecure wall-mounting hardware. 152 mm Wall Mounting Template 2

Chapter 2 Wireless Security Checklist Chapter 2: 4. Enable encryption Wireless Security Checklist Encryption protects data transmitted over a wireless Wireless networks are convenient and easy to install, so network. Wi-Fi Protected Access™ (WPA™/WPA2™) and homes with high-speed Internet access are adopting them Wired Equivalency Privacy (WEP) offer different levels of at a rapid pace. Because wireless networking operates by security for wireless communication. sending information over radio waves, it can be more A network encrypted with WPA™/WPA2™ is more vulnerable to intruders than a traditional wired network. secure than a network encrypted with WEP, because Like signals from your cellular or cordless phones, signals WPA™/WPA2™ uses dynamic key encryption. To protect from your wireless network can also be intercepted. Since the information as it passes over the airwaves, you should you cannot physically prevent someone from connecting enable the highest level of encryption supported by your to your wireless network, you need to take some additional network equipment. steps to keep your network secure. WEP is an older encryption standard and may be the only option available on some older devices that do not 1. Change the default wireless support WPA™. network name or SSID General Network Security Guidelines Wireless devices have a default wireless network name or Service Set Identifier (SSID) set by the factory. This is Wireless network security is useless if the underlying the name of your wireless network, and can be up to 32 network is not secure. characters in length. Linksys by Cisco wireless products s Password protect all computers on the network and use linksys as the default wireless network name. You individually password protect sensitive files. should change the wireless network name to something unique to distinguish your wireless network from other s Change passwords on a regular basis. wireless networks that may exist around you, but do not s Install anti-virus software and personal firewall use personal information (such as your Social Security software. number) because this information may be available for anyone to see when browsing for wireless networks. s Disable file sharing (peer-to-peer). Some applications may open file sharing without your consent and/or knowledge. 2. Change the default password Additional Security Tips For wireless products such as access points, routers, and s Keep wireless routers, access points, or modem routers modem routers, you will be asked for a password when away from exterior walls and windows. you want to change their settings. These devices have a default password set by the factory. The default password s Turn wireless routers, access points, or modem routers is admin. Hackers know these defaults and may try to off when they are not being used (at night, during use them to access your wireless device and change your vacations). network settings. To thwart any unauthorized changes, s Use strong passphrases that are at least eight characters customize the device’s password so it will be hard to in length. Combine letters and numbers to avoid using guess. standard words that can be found in the dictionary. 3. Enable MAC address filtering WEB: For more information on wireless security, visit www.linksysbycisco.com/security Linksys by Cisco routers and modem routers give you the ability to enable Media Access Control (MAC) address filtering. The MAC address is a unique series of numbers and letters assigned to every networking device. With MAC address filtering enabled, wireless network access is provided solely for wireless devices with specific MAC addresses. For example, you can specify the MAC address of each computer in your home so that only those computers can access your wireless network. 3

Chapter 3 Advanced Configuration Chapter 3: List of Screens in the Utility The screens are organized hierarchically as listed below. Advanced Configuration (Some screens may not apply to all models.) After you finish running the Setup Wizard on the Setup Setup Tab CD-ROM, the device is ready for use. To change the device’s Setup > Basic Setup advanced settings, access the Configuration Utility via a Setup > Ethernet web browser on a computer connected to the device. Setup > DDNS Setup > MAC Address Clone NOTE FOR USERS IN NEW ZEALAND: Refer to Setup > Advanced Routing the Note in Setup p > Basic Setup p, p page g 5 for setup instructions specific to your country. Wireless Tab Wireless > Basic Wireless Settings Wireless > Wireless Security How to Access the Utility Wireless > Wireless MAC Filter Launch the web browser on your computer, and enter the Wireless > Advanced Wireless Settings device’s default IP address, 192.168.1.1, in the Address field. Then, press Enter. Storage Tab (WAG320N Only) Storage > Disk Management A login screen appears. Use the default user name and Storage > Shared Folder password, admin, unless you changed them when you ran the Setup Wizard. (You can set a new user name and Storage > Administration password from the Administration tab’s Management Storage > Media Server screen.) Click OK K to continue. Security Tab Security > Firewall Security > VPN Passthrough Access Restrictions Tab Access Restrictions > Internet Access Policy Applications & Gaming Tab Applications & Gaming > Single Port Forwarding Login Applications & Gaming > Port Range Forwarding If you are unable to log in, press the Reset button on the Applications & Gaming > Port Range Triggering back panel for at least 5 seconds, then wait for the device Applications & Gaming > DMZ to reset and try again. Applications & Gaming > QoS Administration Tab Using the Utility Administration > Management Immediately after login, the Basic Setup screen appears. Administration > Reporting Near the top of the screen is a bar with selectable tabs. Administration > Diagnostics Use these tabs to navigate within the Utility. The primary Administration > Back Up & Restore tabs indicate the Utility’s main configuration categories. Each primary tab has one or more secondary tabs that Administration > Factory Defaults provide access to the primary tab’s configuration screens. Administration > Firmware Upgrade Primary Tabs Administration > Language Setup Wireless Storage Security Access Applications & Administration Status Status Tab Restrictions Gaming Status > Modem Router Basic Setup Ethernet DDNS MAC Address Clone Advanced Routing Status > Local Network Secondary Tabs Status > Wireless Network Navigation Tabs Status > DSL Connection To access a screen, click the appropriate primary tab, then click the appropriate secondary tab. The screen will appear, with its primary and secondary tabs highlighted. 4

Chapter 3 Advanced Configuration Setup Tab Setup > Advanced Routing The Setup tab provides the device’s basic setup functions. The Advanced Routing screen allows you to configure the device’s advanced routing functions, such as operating For detailed information on the Setup tab, refer to the mode, dynamic mode, and static routing. Utility’s online help pages. Setup > Basic Setup Wireless Tab The Basic Setup screen allows you to change the device’s The Wireless tab allows you to configure the device’s general settings. The following connection types wireless functions. (encapsulations) are available: For detailed information on the Wireless tab, refer to the Utility’s online help pages. s RFC 2364 PPPoA s RFC 2516 PPPoE Wireless > Basic Wireless Settings s RFC 2684 Routed s IPoA The Basic Wireless Settings screen allows you to set up a network with Wi-Fi Protected Setup™, change the radio s RFC 2684 Bridged - Dynamic IP Address band, select the network mode, change the wireless s RFC 2684 Bridged - Static IP Address network name (SSID), change the wireless channel and s Bridge Mode Only disable the SSID broadcast. NOTE FOR USERS IN NEW ZEALAND: To set up Wireless > Wireless Security the device, follow these instructions: The Wireless Securityy screen allows you to configure the 1. Access the Setup > Basic Setup screen. security of your wireless network(s). It allows you to select 2. Select RFC 2364 PPPoA from the from a number of security modes, such as WPA2. Encapsulation drop-down menu. 3. For the Virtual Circuit ID, enter 0 for the VPI Wireless > Wireless MAC Filter and 100 for the VCI. The Wireless MAC Filter screen allows you to control (block 4. Select VC for Multiplexing. or allow) Internet access by individual devices on your 5. Select Multimode from the DSL Modulation wireless network by specifying their MAC addresses. drop-down menu. 6. Enter your User Name and Password details Wireless > Advanced Wireless Settings from your ISP. The Advanced Wireless Settings screen allows you to 7. Click Save Settings. configure the device’s advanced wireless functions. Setup > Ethernet The Ethernett screen allows you to configure the device’s Ethernet settings. It also allows you to set up the first Ethernet port as a WAN port. Setup > DDNS The DDNS screen allows you to assign a fixed host and Storage > Disk Management domain name to a network computer that has been assigned a dynamic Internet IP address. This is useful The Disk Managementt screen displays information on an when you are hosting your own website, FTP server, or attached USB storage device, and allows you to perform other server behind the device. basic management functions on the device. It also provides information on the attached USB disk, allows for Setup > MAC Address Clone a blank disk to be formatted, and enables safe removal of the attached disk. Some service providers require you to register a MAC address in order to access the Internet. The MAC Address Storage > Shared Folder Clone screen lets you use the MAC address of a device that has already been registered with your service provider, by The Shared Folderr screen allows you to manage the shared copying that MAC address to the device. folders on an external USB storage device. A shared folder 5

Chapter 3 Advanced Configuration is a directory on the device that a user can access through For detailed information on the Applications & Gaming the network. tab, refer to the Utility’s online help pages. Storage > Administration Applications & Gaming > Single Port Forwarding The Administration screen allows you to configure basic The Single Port Forwarding screen allows you to set up storage settings and manage the device’s users. port forwarding for a single port. You should assign static IP addresses to the destination computers before you use Storage > Media Server this feature. The Media Serverr screen allows you to configure the Applications & Gaming > Port Range Forwarding device’s built-in media server, and to select the folders to scan for content. The Port Range Forwarding screen allows you to set up port forwarding for a range of ports. You should assign Security Tab static IP addresses to the destination computers before you use this feature. The Security tab allows you to enhance the security of your network. Applications & Gaming > Port Range Triggering For detailed information on the Security tab, refer to the The Port Range Triggering screen allows you to set up port Utility’s online help pages. triggering. When port triggering is configured, the device watches for specified port numbers in outgoing data. Security > Firewall When a match is found, the device records the sending The Firewalll screen allows you to configure a firewall that computer’s IP address so that when the requested data can filter out various types of unwanted traffic on the returns, it can be sent to the proper computer. device’s local network. Applications & Gaming > DMZ Security > VPN Passthrough The DMZ screen allows you to expose one network user The VPN Passthrough screen allows you to configure the to the Internet for use of a special-purpose service such device’s VPN passthrough feature. This feature lets VPN as Internet gaming or video conferencing. DMZ hosting tunnels using the IPSec, L2TP, or PPTP protocols to pass forwards all the ports at the same time to one computer. through the device’s firewall. You should assign static IP addresses to the destination computers before you use this feature. Access Restrictions Tab Applications & Gaming > QoS The Access Restrictions tab allows you to configure The QoS screen allows you to specify priorities for different the Internet access restrictions for each device in your types of traffic. Lower priority traffic will be slowed down network. to allow greater throughput or less delay for high priority For detailed information on the Access Restrictions tab, traffic. refer to the Utility’s online help pages. Administration Tab Access Restrictions > Internet Access Policy The Administration tab allows you to configure the device’s The Internet Access Policy screen allows you to define administrative functions. policies that are used to block or allow specific kinds of Internet usage and traffic, such as Internet access, For detailed information on the Administration tab, refer designated applications, websites, and inbound traffic to the Utility’s online help pages. during specific days and times, and for a specified list of devices in your network. Administration > Management The Management screen allows you to manage specific Applications & Gaming Tab functions for access and security. The Applications & Gaming tab allows you to configure functions such as port forwarding and quality of service that may be necessary for special applications such as hosting web servers, ftp servers, and e-mail servers on on your network, or other specialized internet applications such as videoconferencing or online gaming. 6

Chapter 3 Advanced Configuration NOTE ON CISCO WEB ASSISTANT OPTION Status Tab (not on all models): If you see an “error code 404” message (indicating that you entered an The Status tab allows you to display status information. invalid web address), the Cisco Web Assistant For detailed information on the Status tab, refer to the will appear and automatically run a search Utility’s online help pages. based on the keywords in the web address. This feature can be enabled or disabled from this Status > Modem Router screen. The Modem Router screen displays information about the device and its current settings. The on-screen information will vary depending on the Internet Connection Type you NOTE ON TREND MICRO OPTION (not on all use. models): Trend Micro ProtectLink Gateway is a hosted security service that stops spam and filters URLS to prevent unwanted content Status > Local Network from passing through your router. The Email The Local Network screen displays the status of your Local Protection is the hosted messaging security Area Network. solution provided by Trend Micro InterScan Messaging Hosted Security (IMHS). This feature Status > Wireless Network can be enabled or disabled from this screen. The Wireless Network screen displays some basic information about the wireless network of the device. Administration > Reporting The Reporting screen allows you to configure system event Status > DSL Connection logging and to configure sending of e-mail alerts when a The DSL Connection screen displays the status of your DSL Denial of Service attack is detected. connection. Administration > Diagnostics The Diagnostics screen allows you to perform a ping test to check the status of your Internet connection. Administration > Back Up & Restore The Back Up & Restore screen allows you to back up and restore the configuration settings of your device. Administration > Factory Defaults The Factory Defaults screen allows you to restore the factory defaults of the device. All savings you have saved will be lost NOTE: Restoring the factory defaults causes all settings you have previously saved to be lost. Administration > Firmware Upgrade The Firmware Upgrade screen allows you to upgrade the device’s firmware. Administration > Language The Language screen allows you to select an available language for the utility. 7

Appendix A Troubleshooting You need to modify the basic settings on the Appendix A: deviceRouter. Troubleshooting Run the Setup Wizard on the Setup CD-ROM. You need to modify the advanced settings on the Your computer cannot connect to the Internet. device. Follow the instructions until your computer can connect Open the web browser (for example, Internet Explorer or to the Internet: Firefox), and enter the device’s IP address in the address s Make sure that the Modem Router is powered on. The field (the default IP address is 192.168.1.1). When Power LED should be green and not flashing. prompted, complete the User name and Password d fields (the default user name and password is admin). Click the s If the Power LED is flashing, then power off all of appropriate tab to change the settings your network devices, including the Modem Router and computers. Then power on each device in the following order: WEB: If your questions are not addressed here, refer to the website, 1. Modem Router www.linksysbycisco.com/support 2. Computer s Check the LEDs on the device’s front panel. Make sure the Power, DSL, and at least one of the numbered Ethernet LEDs are lit. If they are not, then check the cable connections. The computer should be connected to one of the Ethernet ports numbered 1-4 on the device, and the device’s DSL port must be connected to the ADSL line. When you double-click the web browser, you are prompted for a user name and password. If you want to get rid of the prompt, follow these instructions. Launch the web browser and perform the following steps (these steps are specific to Internet Explorer but are similar for other browsers): 1. Select Tools > Internet Options. 2. Click the Connections tab. 3. Select Never dial a connection. 4. Click OK. You are using a static IP address and cannot connect. Refer to Windows Help and change your Internet Protocol (TCP/IP) Properties to Obtain an IP address automatically. The computer cannot connect wirelessly to the network. Make sure the wireless network name or SSID is the same on both the computer and the device. If you have enabled wireless security, then make sure the same security method and key are used by both the computer and the device. 8

Appendix B Specifications Operating Temp. 0 to 40°C (32 to 104°F) Appendix B: Storage Temp. -20 to 70°C (-4 to 158°F) Specifications Operating Humidity 10 to 85% Noncondensing Storage Humidity 5 to 90% Noncondensing WAG120N RAN201 Standards WLAN: 802.11n draft 2.0, 802.11g, 802.11b Ethernet: 802.3, 802.3u ADSL: T1.413i2, G.992.1 (G.DMT), G.992.2 (G.Lite), G.992.3 (ADSL2), G.992.5 (ADSL2+) for Annex A, B, M, L, U-R2 for Annex B Ports DSL, Ethernet (1-4), Power Buttons On/Off, Reset, Wi-Fi Protected Setup™ LEDs Power, Ethernet (1-4), Security, Wireless, DSL, Internet Cabling Type CAT5, RJ-11 (for Annex A), RJ-45 (for Annex B) Antennas 2 Internal Modulations IEEE 802.11b mode:DSSS IEEE 802.11g mode:OFDM draft 802.11n Standard‑20MHz Channel mode:OFDM draft 802.11n Wide‑40MHz Channel mode:OFDM IEEE 802.11b mode:19.83 dBm Transmit Power IEEE 802.11g mode:17.45 dBm draft 802.11n standard‑20MHz Channel mode:18.70 dBm draft 802.11n Wide‑40MHz Channel mode:15.47 dBm Receive Sensitivity -80 dBm (typical) @ 11 Mbps -70 dBm (typical) @ 54 Mbps -61 dBm (typical) @ 130 Mbps -61 dBm (typical) @ 270 Mbps Antenna Gain PCB Antenna Gain:1.5 dBi PIFA Antenna Gain:2 dBi Security Features WPA2™/WPA™ Personal and Enterprise; 128, 64 bits WEP; MAC Address Filtering; SPI Firewall OS Requirements Windows XP, Vista, or Vista 64-bit (to run the edition with latest updates (for Setup CD) Network Magic and Setup Wizard); Mac OS X 10.4 or higher (for Setup Wizard) Environmental Dimensions 202 x 34 x 160 mm (8,0” x 1,3” x 6,3”) Weight 362 g (12,8 oz) Power 12VDC, 1A Certification FCC, CE, Telepermit, K.21, UL, CB, Wi-Fi (802.11b/g), WPA™, WPA2™, WMM, Wi-Fi Protected Setup™ 9

Appendix C Regulatory Information Appendix C: Íslenska Þetta tæki er samkvæmt grunnkröfum og öðrum viðeigandi ákvæðum Tilskipunar Regulatory Information [Icelandic]: 1999/5/EC. Italiano Questo apparato é conforme ai requisiti European Union [Italian]: essenziali ed agli altri principi sanciti dalla Direttiva 1999/5/CE. The following information applies if you use the product within the European Union. Šī iekārta atbilst Direktīvas 1999/5/ Latviski EK būtiskajām prasībām un citiem ar to [Latvian]: Declaration of Conformity with Regard to EU saistītajiem noteikumiem. Directive 1999/5/EC (R&TTE Directive) Šis įrenginys tenkina 1999/5/EB Direktyvos Lietuvių Compliance Information for 2,4-GHz Wireless esminius reikalavimus ir kitas šios direktyvos [Lithuanian]: nuostatas. Products Relevant to the EU and Other Countries Following the EU Directive 1999/5/EC (R&TTE Directive) Nederlands Dit apparaat voldoet aan de essentiele eisen en andere van toepassing zijnde bepalingen [Dutch]: van de Richtlijn 1999/5/EC. Malti Dan l-apparat huwa konformi mal-ħtiġiet essenzjali u l-provedimenti l-oħra rilevanti [Maltese]: tad-Direttiva 1999/5/EC. Това оборудване отговаря на съществените Български изисквания и приложими клаузи на [Bulgarian] Ez a készülék teljesíti az alapvető Директива 1999/5/ЕС. Magyar követelményeket és más 1999/5/EK [Hungarian]: irányelvben meghatározott vonatkozó Česky Toto zařízení je v souladu se základními rendelkezéseket. požadavky a ostatními odpovídajícími [Czech]: ustanoveními Směrnice 1999/5/EC. Norsk Dette utstyret er i samsvar med de grunnleggende krav og andre relevante Dansk Dette udstyr er i overensstemmelse med [Norwegian]: bestemmelser i EU-direktiv 1999/5/EF. de væsentlige krav og andre relevante [Danish]: bestemmelser i Direktiv 1999/5/EF. Polski Urządzenie jest zgodne z ogólnymi wymaganiami oraz szczególnymi warunkami Dieses Gerät entspricht den grundlegenden [Polish]: Deutsch określonymi Dyrektywą UE: 1999/5/EC. Anforderungen und den weiteren [German]: entsprechenden Vorgaben der Richtlinie 1999/5/EU. Português Este equipamento está em conformidade com os requisitos essenciais e outras provisões [Portuguese]: relevantes da Directiva 1999/5/EC. Eesti See seade vastab direktiivi 1999/5/EÜ olulistele nõuetele ja teistele asjakohastele [Estonian]: sätetele. Acest echipament este in conformitate Română cu cerintele esentiale si cu alte prevederi [Romanian] relevante ale Directivei 1999/5/EC. This equipment is in compliance with the English: essential requirements and other relevant Slovensko Ta naprava je skladna z bistvenimi zahtevami provisions of Directive 1999/5/EC. in ostalimi relevantnimi pogoji Direktive [Slovenian]: 1999/5/EC. Español Este equipo cumple con los requisitos esenciales asi como con otras disposiciones Toto zariadenie je v zhode so základnými [Spanish]: de la Directiva 1999/5/CE. Slovensky požiadavkami a inými príslušnými [Slovak]: nariadeniami direktív: 1999/5/EC. Ελληνική Αυτός ο εξοπλισµός είναι σε συµµόρφωση µε τις ουσιώδεις απαιτήσεις και άλλες σχετικές Tämä laite täyttää direktiivin 1999/5/EY [Greek]: διατάξεις της Οδηγίας 1999/5/EC. Suomi olennaiset vaatimukset ja on siinä asetettujen [Finnish]: muiden laitetta koskevien määräysten Cet appareil est conforme aux exigences mukainen. Français essentielles et aux autres dispositions [French]: Svenska Denna utrustning är i överensstämmelse med pertinentes de la Directive 1999/5/EC. de väsentliga kraven och andra relevanta [Swedish]: bestämmelser i Direktiv 1999/5/EC. 11

Appendix C Regulatory Information For all products, the Declaration of Conformity (DofC) is nessuna limitazione, eccetto per i paesi menzionati di available through one or more of these options: seguito: s A pdf file is included on the product’s CD. Das Produkt kann in allen EU Staaten ohne Einschränkungen eingesetzt werden (sowie in anderen Staaten die der EU s A print copy is included with the product. Direktive 1999/5/CE folgen) mit Außnahme der folgenden s A pdf file is available on the product’s webpage. aufgeführten Staaten: Visit www.linksysbycisco.com/international y y and In the majority of the EU and other European countries, select your country or region. Then select your product. the 2,4-GHz bands have been made available for If you need any other technical documentation, see the the use of wireless local area networks (LANs). Later in “Technical Documents on www.linksysbycisco.com/ this document you will find an overview of countries in international” section, as shown later in this appendix. which additional restrictions or requirements or both are applicable. Non-Wireless Equipment (ADSL Modems/Gateways) The requirements for any country may evolve. Linksys The following standards were applied during the recommends that you check with the local authorities for assessment of the product against the requirements of the latest status of their national regulations for both the the Directive 1999/5/EC: 2,4- GHz wireless LANs. s EMC: EN 55 022 and EN 55 024 The following countries have restrictions and/or requirements in addition to those given in the table s Safety: EN 60950-1 labeled “Overview of Regulatory Requirements for Wireless CE Marking LANs”: For the Linksys products such as the ADSL modems/ gateways, the following CE mark is added to the equipment. Wireless Equipment (Wireless-N/G/A/B Products) France The following standards were applied during the For 2,4 GHz, the product should not be used outdoors assessment of the product against the requirements of in the band 2454 - 2483,5 MHz. There are no restrictions the Directive 1999/5/EC: when used in other parts of the 2,4 GHz band OR when used indoors. Check http://www.arcep.fr/ p p for more s Radio: EN 300 328 and/or EN 301 893 as applicable details. s EMC: EN 301 489-1, EN 301 489-17 Pour la bande 2,4 GHz, l’ équipement ne doit pas être s Safety: EN 60950-1 and either EN 50385 or EN 50371 utilisé en extérieur dans la bande 2454- 2483,5 MHz. Il n’y a aucune restriction pour son utilisation dans d’autres For the Linksys Wireless-N, -G, -B, and/or -A products, the parties de la bande des 2,4 GHz ainsi que pour une following CE mark, and class 2 identifier are added to the utilisation en intérieur. Consultez http://www.arcep.fr/ p p equipment. pour de plus amples détails. National Restrictions This product may be used in all EU countries (and other countries following the EU directive 1999/5/EC) without any limitation except for the countries mentioned below: Ce produit peut être utilisé dans tous les pays de l’UE (et dans tous les pays ayant transposés la directive 1999/5/CE) sans aucune limitation, excepté pour les pays mentionnés ci- dessous: Questo prodotto è utilizzabile in tutte i paesi EU (ed in tutti gli altri paesi che seguono le direttive EU 1999/5/EC) senza 12

Appendix C Regulatory Information Third-Party Software or Firmware The use of software or firmware not supported/provided by Linksys may result that the equipment is no longer compliant with the regulatory requirements. Latvia Technical Documents on The outdoor usage of the 2,4 GHz band requires an www.linksysbycisco.com/international authorization from the Electronic Communications Office. Follow these steps to access technical documents: Please check http://www.esd.lv p for more details. 2,4 GHz frekveču joslas izmantošanai ārpus telpām 1. Enter http://www.linksysb p y ycisco.com/international y nepieciešama atļauja no Elektronisko sakaru direkcijas. in your web browser. Vairāk informācijas: http://www.esd.lv p . 2. Select the country or region in which you live. 3. Click the Products tab. Notes: 4. Select the appropriate product category. 1. Although Norway, Switzerland and Liechtenstein are not EU member states, the EU Directive 1999/5/EC has 5. Select the product sub-category, if necessary. also been implemented in those countries. 6. Select the product. 2. The regulatory limits for maximum output power are 7. Select the type of documentation you want from the More specified in EIRP. The EIRP level (in dBm) of a device can Information section. The document will open in PDF format be calculated by adding the gain of the antenna used if you have Adobe Acrobat installed on your computer. (specified in dBi) to the output power available at the connector (specified in dBm). NOTE: If you have questions regarding the compliance of this product or you Product Usage Restrictions cannot find the information you need, please contact your local sales office or visit This product is designed for indoor usage only. Outdoor www.linksysbycisco.com/international usage is not recommended, unless otherwise noted. Outdoor usage may even be prohibited (see below). 2,4 GHz Restrictions This product is designed for use with the standard, integral or dedicated (external) antenna(s) that is/are shipped together with the equipment. However, some applications may require the antenna(s), if removable, to be separated from the product and installed remotely from the device by using extension cables. For these applications, Linksys offers an R SMA extension cable (AC9SMA) and an R-TNC extension cable (AC9TNC). Both of these cables are 9 meters long and have a cable loss (attenuation) of 5 dB. To compensate for the attenuation, Linksys also offers higher gain antennas, the HGA7S (with R-SMA connector) and HGA7T (with R-TNC connector). These antennas have a gain of 7 dBi and may only be used with either the R-SMA or R-TNC extension cable. Combinations of extension cables and antennas resulting in a radiated power level exceeding 20 dBm (100 mW) EIRP (2,4 GHz band) are illegal. 13

Appendix C Regulatory Information User Information for Consumer Products Covered Čeština (Czech) - Informace o ochraně životního prostředí pro zákazníky v zemích Evropské unie by EU Directive 2002/96/EC on Waste Electric and Evropská směrnice 2002/96/ES zakazuje, aby zařízení označené Electronic Equipment (WEEE) tímto symbolem s netříděným komunálním odpadem. Tento symbol udává, This document contains important information for users že daný produkt musí být likvidován odděleně od běžného with regards to the proper disposal and recycling of komunálního odpadu. Odpovídáte za likvidaci tohoto produktu Linksys products. Consumers are required to comply a dalších elektrických a elektronických zařízení prostřednictvím with this notice for all electronic products bearing the určených sběrných míst stanovených vládou nebo místními following symbol: úřady. Správná likvidace a recyklace pomáhá předcházet potenciálním negativním dopadům na životní prostředí a lidské zdraví. Podrobnější informace o likvidaci starého vybavení si laskavě vyžádejte od místních úřadů, podniku zabývajícího se likvidací komunálních odpadů nebo obchodu, kde jste produkt zakoupili. Dansk (Danish) - Miljøinformation for kunder i EU EU-direktiv 2002/96/EF kræver, at udstyr der bærer dette symbol usorteret kommunalt affald. Symbolet betyder, at dette produkt skal bortskaffes adskilt fra det almindelige husholdningsaffald. the European Union Det er dit ansvar at bortskaffe dette og andet elektrisk og European Directive 2002/96/EC requires that the equipment elektronisk udstyr via bestemte indsamlingssteder udpeget bearing this symbol af staten eller de lokale myndigheder. Korrekt bortskaffelse not be disposed of with unsorted municipal waste. The symbol og genvinding vil hjælpe med til at undgå mulige skader for indicates that this product should be disposed of separately miljøet og menneskers sundhed. Kontakt venligst de lokale from regular household waste streams. It is your responsibility to myndigheder, renovationstjenesten eller den butik, hvor du dispose of this and other electric and electronic equipment via har købt produktet, angående mere detaljeret information om designated collection facilities appointed by the government or bortskaffelse af dit gamle udstyr. local authorities. Correct disposal and recycling will help prevent potential negative consequences to the environment and human health. For more detailed information about the disposal Deutsch (German) - Umweltinformation für Kunden of your old equipment, please contact your local authorities, innerhalb der Europäischen Union waste disposal service, or the shop where you purchased the Die Europäische Richtlinie 2002/96/EC verlangt, dass technische product. Ausrüstung, die direkt am Gerät und/oder an der Verpackung mit diesem Symbol versehen ist Български (Bulgarian) - Информация относно Gemeindeabfall entsorgt werden darf. Das Symbol weist darauf hin, dass das Produkt von regulärem Haushaltmüll getrennt опазването на околната среда за потребители в entsorgt werden sollte. Es liegt in Ihrer Verantwortung, dieses Европейския съюз Gerät und andere elektrische und elektronische Geräte über Европейска директива 2002/96/EC изисква уредите, носещи die dafür zuständigen und von der Regierung oder örtlichen този символ Behörden dazu bestimmten Sammelstellen zu entsorgen. се изхвърля т с несортирани битови отпадъци. Символът Ordnungsgemäßes Entsorgen und Recyceln trägt dazu bei, обозначава, че изделието трябва да се изхвърля отделно от potentielle negative Folgen für Umwelt und die menschliche сметосъбирането на обикновените битови отпадъци. Ваша Gesundheit zu vermeiden. Wenn Sie weitere Informationen zur е отговорността този и другите електрически и електронни Entsorgung Ihrer Altgeräte benötigen, wenden Sie sich bitte an уреди да се изхвърлят в предварително определени от die örtlichen Behörden oder städtischen Entsorgungsdienste държавните или общински органи специализирани пунктове oder an den Händler, bei dem Sie das Produkt erworben haben. за събиране. Правилното изхвърляне и рециклиране ще спомогнат да се предотвратят евентуални вредни за околната среда и здравето на населението последствия. За по-подробна информация относно изхвърлянето на вашите стари уреди се обърнете към местните власти, службите за сметосъбиране или магазина, от който сте закупили уреда. 14

Appendix C Regulatory Information Eesti (Estonian) - Keskkonnaalane informatsioon Français (French) - Informations environnementales Euroopa Liidus asuvatele klientidele pour les clients de l’Union européenne Euroopa Liidu direktiivi 2002/96/EÜ nõuete kohaselt on La directive européenne 2002/96/CE exige que l’équipement seadmeid, millel on tootel või pakendil käesolev sümbol sur lequel est apposé ce symbole keelatud kõrvaldada koos sorteerimata olmejäätmetega. See emballage ne soit pas jeté avec les autres ordures ménagères. Ce sümbol näitab, et toode tuleks kõrvaldada eraldi tavalistest symbole indique que le produit doit être éliminé dans un circuit olmejäätmevoogudest. Olete kohustatud kõrvaldama käesoleva distinct de celui pour les déchets des ménages. Il est de votre ja ka muud elektri- ja elektroonikaseadmed riigi või kohalike responsabilité de jeter ce matériel ainsi que tout autre matériel ametiasutuste poolt ette nähtud kogumispunktide kaudu. électrique ou électronique par les moyens de collecte indiqués Seadmete korrektne kõrvaldamine ja ringlussevõtt aitab vältida par le gouvernement et les pouvoirs publics des collectivités võimalikke negatiivseid tagajärgi keskkonnale ning inimeste territoriales. L’élimination et le recyclage en bonne et due forme tervisele. Vanade seadmete kõrvaldamise kohta täpsema ont pour but de lutter contre l’impact néfaste potentiel de ce informatsiooni saamiseks võtke palun ühendust kohalike type de produits sur l’environnement et la santé publique. Pour ametiasutustega, jäätmekäitlusfirmaga või kauplusega, kust te plus d’informations sur le mode d’élimination de votre ancien toote ostsite. équipement, veuillez prendre contact avec les pouvoirs publics locaux, le service de traitement des déchets, ou l’endroit où vous avez acheté le produit. Español (Spanish) - Información medioambiental para clientes de la Unión Europea La Directiva 2002/96/CE de la UE exige que los equipos que Italiano (Italian) - Informazioni relative all’ambiente lleven este símbolo per i clienti residenti nell’Unione Europea no deben eliminarse junto con otros residuos urbanos no La direttiva europea 2002/96/EC richiede che le apparecchiature seleccionados. El símbolo indica que el producto en cuestión contrassegnate con questo simbolo debe separarse de los residuos domésticos convencionales con sull’imballaggio non siano smaltite insieme ai rifiuti urbani vistas a su eliminación. Es responsabilidad suya desechar este y non differenziati. Il simbolo indica che questo prodotto non cualesquiera otros aparatos eléctricos y electrónicos a través de deve essere smaltito insieme ai normali rifiuti domestici. È los puntos de recogida que ponen a su disposición el gobierno y responsabilità del proprietario smaltire sia questi prodotti sia las autoridades locales. Al desechar y reciclar correctamente estos le altre apparecchiature elettriche ed elettroniche mediante aparatos estará contribuyendo a evitar posibles consecuencias le specifiche strutture di raccolta indicate dal governo o dagli negativas para el medio ambiente y la salud de las personas. Si enti pubblici locali. Il corretto smaltimento ed il riciclaggio desea obtener información más detallada sobre la eliminación aiuteranno a prevenire conseguenze potenzialmente negative segura de su aparato usado, consulte a las autoridades locales, per l’ambiente e per la salute dell’essere umano. Per ricevere al servicio de recogida y eliminación de residuos de su zona o informazioni più dettagliate circa lo smaltimento delle vecchie pregunte en la tienda donde adquirió el producto. apparecchiature in Vostro possesso, Vi invitiamo a contattare gli enti pubblici di competenza, il servizio di smaltimento rifiuti o il negozio nel quale avete acquistato il prodotto. Ελληνικά (Greek) - Στοιχεία περιβαλλοντικής προστασίας για πελάτες εντός της Ευρωπαϊκής Ένωσης Latviešu valoda (Latvian) - Ekoloģiska informācija Σύμφωνα με την Κοινοτική Οδηγία 2002/96/EC, ο εξοπλισμός που klientiem Eiropas Savienības jurisdikcijā φέρει αυτό το σύμβολο Direktīvā 2002/96/EK ir prasība, ka aprīkojumu, kam pievienota δεν πρέπει να απορρίπτεται μαζί με τα μη διαχωρισμένα αστικά zīme απορρίμματα. Το σύμβολο υποδεικνύει ότι αυτό το προϊόν θα izmest nešķirotā veidā kopā ar komunālajiem atkritumiem πρέπει να απορρίπτεται ξεχωριστά από τα συνήθη οικιακά (tiem, ko rada vietēji iedzīvotāji un uzņēmumi). Šī zīme nozīmē απορρίμματα. Είστε υπεύθυνος για την απόρριψη του παρόντος to, ka šī ierīce ir jāizmet atkritumos tā, lai tā nenonāktu kopā ar και άλλου ηλεκτρικού και ηλεκτρονικού εξοπλισμού μέσω των parastiem mājsaimniecības atkritumiem. Jūsu pienākums ir šo καθορισμένων εγκαταστάσεων συγκέντρωσης απορριμμάτων, un citas elektriskas un elektroniskas ierīces izmest atkritumos, οι οποίες ορίζονται από το κράτος ή τις αρμόδιες τοπικές αρχές. izmantojot īpašus atkritumu savākšanas veidus un līdzekļus, ko Η σωστή απόρριψη και ανακύκλωση συμβάλλει στην πρόληψη nodrošina valsts un pašvaldību iestādes. Ja izmešana atkritumos ενδεχόμενων αρνητικών επιπτώσεων στο περιβάλλον και την un pārstrāde tiek veikta pareizi, tad mazinās iespējamais υγεία. Για περισσότερες πληροφορίες σχετικά με την απόρριψη kaitējums dabai un cilvēku veselībai. Sīkākas ziņas par του παλαιού σας εξοπλισμού, επικοινωνήστε με τις τοπικές novecojuša aprīkojuma izmešanu atkritumos jūs varat saņemt αρχές, τις υπηρεσίες αποκομιδής απορριμμάτων ή το κατάστημα vietējā pašvaldībā, atkritumu savākšanas dienestā, kā arī veikalā, από το οποίο αγοράσατε το προϊόν. kur iegādājāties šo izstrādājumu. 15

Appendix C Regulatory Information Lietuvškai (Lithuanian) - Aplinkosaugos informacija, Nederlands (Dutch) - Milieu-informatie voor klanten skirta Europos Sąjungos vartotojams in de Europese Unie Europos direktyva 2002/96/EC numato, kad įrangos, kuri ir De Europese Richtlijn 2002/96/EC schrijft voor dat apparatuur die is voorzien van dit symbool negalima šalinti kartu su nerūšiuotomis komunalinėmis niet mag worden ingezameld met niet-gescheiden huishoudelijk atliekomis. Šis simbolis rodo, kad gaminį reikia šalinti atskirai afval. Dit symbool geeft aan dat het product apart moet worden nuo bendro buitinių atliekų srauto. Jūs privalote užtikrinti, kad ingezameld. U bent zelf verantwoordelijk voor de vernietiging ši ir kita elektros ar elektroninė įranga būtų šalinama per tam van deze en andere elektrische en elektronische apparatuur via de tikras nacionalinės ar vietinės valdžios nustatytas atliekų rinkimo daarvoor door de landelijke of plaatselijke overheid aangewezen sistemas. Tinkamai šalinant ir perdirbant atliekas, bus išvengta inzamelingskanalen. De juiste vernietiging en recycling van galimos žalos aplinkai ir žmonių sveikatai. Daugiau informacijos deze apparatuur voorkomt mogelijke negatieve gevolgen voor apie jūsų senos įrangos šalinimą gali pateikti vietinės valdžios het milieu en de gezondheid. Voor meer informatie over het institucijos, atliekų šalinimo tarnybos arba parduotuvės, kuriose vernietigen van uw oude apparatuur neemt u contact op met įsigijote tą gaminį. de plaatselijke autoriteiten of afvalverwerkingsdienst, of met de winkel waar u het product hebt aangeschaft. Malti (Maltese) - Informazzjoni Ambjentali għal Klijenti fl-Unjoni Ewropea Norsk (Norwegian) - Miljøinformasjon for kunder i EU Id-Direttiva Ewropea 2002/96/KE titlob li t-tagħmir li jkun fih EU-direktiv 2002/96/EF krever at utstyr med følgende symbol is-simbolu jintrema ma’ skart muniċipali li ma ġiex isseparat. Is-simbolu sammen med usortert avfall. Symbolet indikerer at dette jindika li dan il-prodott għandu jintrema separatament minn ma’ produktet skal håndteres atskilt fra ordinær avfallsinnsamling l-iskart domestiku regolari. Hija responsabbiltà tiegħek li tarmi for husholdningsavfall. Det er ditt ansvar å kvitte deg med dan it-tagħmir u kull tagħmir ieħor ta’ l-elettriku u elettroniku dette produktet og annet elektrisk og elektronisk avfall via egne permezz ta’ faċilitajiet ta’ ġbir appuntati apposta mill-gvern jew innsamlingsordninger slik myndighetene eller kommunene mill-awtoritajiet lokali. Ir-rimi b’mod korrett u r-riċiklaġġ jgħin bestemmer. Korrekt avfallshåndtering og gjenvinning vil jipprevjeni konsegwenzi negattivi potenzjali għall-ambjent u være med på å forhindre mulige negative konsekvenser for għas-saħħa tal-bniedem. Għal aktar informazzjoni dettaljata miljø og helse. For nærmere informasjon om håndtering av dwar ir-rimi tat-tagħmir antik tiegħek, jekk jogħġbok ikkuntattja det kasserte utstyret ditt, kan du ta kontakt med kommunen, lill-awtoritajiet lokali tiegħek, is-servizzi għar-rimi ta’ l-iskart, jew en innsamlingsstasjon for avfall eller butikken der du kjøpte il-ħanut minn fejn xtrajt il-prodott. produktet. Magyar (Hungarian) - Környezetvédelmi információ az Polski (Polish) - Informacja dla klientów w Unii európai uniós vásárlók számára Europejskiej o przepisach dotyczących ochrony A 2002/96/EC számú európai uniós irányelv megkívánja, środowiska hogy azokat a termékeket, amelyeken, és/vagy amelyek Dyrektywa Europejska 2002/96/EC wymaga, aby sprzęt csomagolásán az alábbi címke oznaczony symbolem szelektálatlan lakossági hulladékkal együtt kidobni. A címke lub jego opakowaniu nie był wyrzucany razem z innymi azt jelöli, hogy az adott termék kidobásakor a szokványos niesortowanymi odpadami komunalnymi. Symbol ten wskazuje, háztartási hulladékelszállítási rendszerektõl elkülönített eljárást że produkt nie powinien być usuwany razem ze zwykłymi kell alkalmazni. Az Ön felelõssége, hogy ezt, és más elektromos odpadami z gospodarstw domowych. Na Państwu spoczywa és elektronikus berendezéseit a kormányzati vagy a helyi obowiązek wyrzucania tego i innych urządzeń elektrycznych hatóságok által kijelölt gyűjtõredszereken keresztül számolja oraz elektronicznych w punktach odbioru wyznaczonych fel. A megfelelõ hulladékfeldolgozás segít a környezetre és az przez władze krajowe lub lokalne. Pozbywanie się sprzętu emberi egészségre potenciálisan ártalmas negatív hatások we właściwy sposób i jego recykling pomogą zapobiec megelõzésében. Ha elavult berendezéseinek felszámolásához potencjalnie negatywnym konsekwencjom dla środowiska i további részletes információra van szüksége, kérjük, lépjen zdrowia ludzkiego. W celu uzyskania szczegółowych informacji kapcsolatba a helyi hatóságokkal, a hulladékfeldolgozási o usuwaniu starego sprzętu, prosimy zwrócić się do lokalnych szolgálattal, vagy azzal üzlettel, ahol a terméket vásárolta. władz, służb oczyszczania miasta lub sklepu, w którym produkt został nabyty. 16

Appendix C Regulatory Information Português (Portuguese) - Informação ambiental para Slovenščina (Slovene) - Okoljske informacije za clientes da União Europeia stranke v Evropski uniji A Directiva Europeia 2002/96/CE exige que o equipamento Evropska direktiva 2002/96/ES prepoveduje odlaganje opreme s que exibe este símbolo tem simbolom não seja eliminado junto com os resíduos municipais não komunalnimi odpadki. Ta simbol opozarja, da je treba izdelek separados. O símbolo indica que este produto deve ser zavreči ločeno od preostalih gospodinjskih odpadkov. Vaša eliminado separadamente dos resíduos domésticos regulares. odgovornost je, da to in preostalo električno in elektronsko É da sua responsabilidade eliminar este e qualquer outro opremo oddate na posebna zbirališča, ki jih določijo državne equipamento eléctrico e electrónico através das instalações ustanove ali lokalne oblasti. S pravilnim odlaganjem in de recolha designadas pelas autoridades governamentais ou recikliranjem boste preprečili morebitne škodljive vplive na locais. A eliminação e reciclagem correctas ajudarão a prevenir okolje in zdravje ljudi. Če želite izvedeti več o odlaganju stare as consequências negativas para o ambiente e para a saúde opreme, se obrnite na lokalne oblasti, odlagališče odpadkov ali humana. Para obter informações mais detalhadas sobre a trgovino, kjer ste izdelek kupili. forma de eliminar o seu equipamento antigo, contacte as autoridades locais, os serviços de eliminação de resíduos ou o estabelecimento comercial onde adquiriu o produto. Suomi (Finnish) - Ympäristöä koskevia tietoja EU- alueen asiakkaille EU-direktiivi 2002/96/EY edellyttää, että jos laitteistossa on tämä Română (Romanian) - Informaţii de mediu pentru symboli clienţii din Uniunea Europeană ei saa hävittää lajittelemattoman yhdyskuntajätteen mukana. Directiva europeană 2002/96/CE impune ca echipamentele care Symboli merkitsee sitä, että tämä tuote on hävitettävä erillään prezintă acest simbol tavallisesta kotitalousjätteestä. Sinun vastuullasi on hävittää nu fie casate împreună cu gunoiul menajer municipal. Simbolul tämä elektroniikkatuote ja muut vastaavat elektroniikkatuotteet indică faptul că acest produs trebuie să fie casat separat de viemällä tuote tai tuotteet viranomaisten määräämään gunoiul menajer obişnuit. Este responsabilitatea dvs. să casaţi keräyspisteeseen. Laitteiston oikea hävittäminen estää acest produs şi alte echipamente electrice şi electronice prin mahdolliset kielteiset vaikutukset ympäristöön ja ihmisten intermediul unităţilor de colectare special desemnate de guvern terveyteen. Lisätietoja vanhan laitteiston oikeasta hävitystavasta sau de autorităţile locale. Casarea şi reciclarea corecte vor ajuta saa paikallisilta viranomaisilta, jätteenhävityspalvelusta tai siitä la prevenirea potenţialelor consecinţe negative asupra sănătăţii myymälästä, josta ostit tuotteen. mediului şi a oamenilor. Pentru mai multe informaţii detaliate cu privire la casarea acestui echipament vechi, contactaţi autorităţile locale, serviciul de salubrizare sau magazinul de la Svenska (Swedish) - Miljöinformation för kunder i care aţi achiziţionat produsul. Europeiska unionen Det europeiska direktivet 2002/96/EC kräver att utrustning med denna symbol Slovenčina (Slovak) - Informácie o ochrane životného kastas med osorterat kommunalt avfall. Symbolen visar att denna prostredia pre zákazníkov v Európskej únii produkt bör kastas efter att den avskiljts från vanligt hushållsavfall. Podľa európskej smernice 2002/96/ES zariadenie s týmto Det faller på ditt ansvar att kasta denna och annan elektrisk och symbolom elektronisk utrustning på fastställda insamlingsplatser utsedda likvidované spolu s netriedeným komunálnym odpadom. av regeringen eller lokala myndigheter. Korrekt kassering och Symbol znamená, že produkt by sa mal likvidovať oddelene återvinning skyddar mot eventuella negativa konsekvenser od bežného odpadu z domácností. Je vašou povinnosťou för miljön och personhälsa. För mer detaljerad information om likvidovať toto i ostatné elektrické a elektronické zariadenia kassering av din gamla utrustning kontaktar du dina lokala prostredníctvom špecializovaných zberných zariadení určených myndigheter, avfallshanteringen eller butiken där du köpte vládou alebo miestnymi orgánmi. Správna likvidácia a recyklácia produkten. pomôže zabrániť prípadným negatívnym dopadom na životné prostredie a zdravie ľudí. Ak máte záujem o podrobnejšie informácie o likvidácii starého zariadenia, obráťte sa, prosím, na WEB: For additional information, please visit miestne orgány, organizácie zaoberajúce sa likvidáciou odpadov www.linksysbycisco.com/international alebo obchod, v ktorom ste si produkt zakúpili. 17

Appendix C Regulatory Information Australia Cisco-Linksys ADSL2+ Devices on Long Lines The following information applies if you use the product ADSL2+ devices may not achieve the type of “high speed” within Australia. operation expected when attached to a line that is longer than intended by the ITU-T Rec. G.996.1 ADSL standard Safety Notice i.e. >3 km of 0.4mm cable or a shorter cable length with several tails or multiples. If the device is installed in such WARNING: To ensure compliance with conditions and does not give the expected “download” exposure limits to radiofrequency fields, the performance, then do not refer the matter to the Telecom antenna of the device should be no closer than Fault Service or ADSL Helpdesk. 20 cm from the body during use. United States of America New Zealand The following information applies if you use the product The following information applies if you use the product within the United States of America. within New Zealand. FCC Statement Telepermit Statement The cabling between the phone port and the phone shall This equipment has been tested and found to comply with the not exceed 100 metres. limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable PTC200 General Warning protection against harmful interference in a residential The grant of a Telepermit for any item of terminal installation. This equipment generates, uses and can radiate equipment indicates only that Telecom has accepted radio frequency energy and, if not installed and used in that the item complies with minimum conditions for accordance with the instructions, may cause harmful connection to its network. It indicates no endorsement interference to radio communications. However, there is no of the product by Telecom, nor does it provide any sort guarantee that interference will not occur in a particular of warranty. Above all, it provides no assurance that any installation. If this equipment does cause harmful interference item will work correctly in all respects with another item to radio or television reception, which can be determined by of Telepermitted equipment of a different make or model, turning the equipment off and on, the user is encouraged to try nor does it imply that any product is compatible with all of to correct the interference by one or more of the following Telecom’s network services. measures: Wireless Connectivity Security on Cisco-Linksys -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. ADSL2+ Devices -Connect the equipment into an outlet on a circuit different Setting up the security of the wireless connection from that to which the receiver is connected. associated with ADSL2+ device is the user’s responsibility. -Consult the dealer or an experienced radio/TV technician for Telecom will take no responsibility for charges made to help. user’s accounts due to poorly organized wireless security allowing unknown users to connect to the Internet via this device. Do not complain to the Telecom Fault Service or FCC Caution: Any changes or modifications not expressly Jetstream Helpdesk should this occur. approved by the party responsible for compliance could void the user’s authority to operate this equipment. General Warning for Cisco-Linksys ADSL2+ FCC Radiation Exposure Statement Devices and ADSL2+ Capability This equipment complies with FCC radiation exposure limits This device has been tested and found suitable to connect set forth for an uncontrolled environment. This equipment to the Telecom ADSL2+ capability. This indicates only that should be installed and operated with minimum distance Telecom has accepted that this device complies with the 20cm between the radiator and your body. spectrum management plan for ADSL2+ on copper cable and with simple voiceband compatibility tests included in PTC273. It does not indicate that this device is fully compatible with all services accessed via the ADSL2+ capability. Contact the supplier of the device when issues occur. Do not call the Telecom Fault Service or the Jetstream Helpdesk. 18

Appendix C Regulatory Information This transmitter must not be co-located or operating in No repairs may be done by the customer. If trouble is conjunction with any other antenna or transmitter. IEEE experienced with this equipment, please contact your 802.11b or 802.11g operation of this product in the USA is authorized support provider for repair and warranty firmware-limited to channels 1 through 11. information. If the trouble is causing harm to the telephone network, the telephone company may request FCC Part 68 Statement you remove the equipment from the network until the This equipment complies with Part 68 of the FCC Rules. A problem is resolved. This equipment cannot be used on label is attached to the equipment that contains, among telephone company provided coin service. Connection to other information, its FCC registration number and ringer Party Line Service is subject to state tariffs. equivalence number. If requested, this information must be provided to the telephone company. Safety Notices This equipment uses the following USOC Jack: RJ-11. WARNING: To reduce the risk of fire, use only An FCC compliant telephone cord and modular plug No.26 AWG or larger telecommunication line is provided with this equipment. This equipment is cord. designed to be connected to the telephone network or premises wiring using a compatible modular jack, which WARNING: Do not use this product near water, is FCC Part 68 compliant. Connection to the telephone for example, in a wet basement or near a network should be made by using the standard modular swimming pool. telephone jack. The REN is useful to determine the quantity of devices WARNING: Avoid using this product during an that may be connected to the telephone line and still have electrical storm. There may be a remote risk of all of those devices ring when your telephone number is electric shock from lightning. called. In most, but not all areas, the sum of RENs should not exceed 5. To be certain of the number of devices that may be connected to the line, as determined by the total WARNING: This equipment will be inoperable RENs, contact the telephone company to determine the when main power fails. maximum REN for the calling area. If this equipment causes harm to the telephone network, WARNING: To ensure compliance with the telephone company may discontinue your service explosure limits to radiofrequency fields, the temporarily. If advance notice is not practical, the antenna of the device should be no closer than telephone company will notify the customer as soon as 20 cm from the body during use. possible. Also, you will be advised of your right to file a complaint with the FCC if you believe it is necessary. The telephone company may make changes in its facilities, equipment, operations, or procedures that could affect the operation of the equipment. If this happens, the telephone company will provide advance notice in order for you to make the necessary modifications in order to maintain uninterrupted service. In the event this equipment should fail to operate properly, disconnect the unit from the telephone line. Try using another FCC approved device in the same telephone jack. If the trouble persists, call the telephone company repair service bureau. If the trouble does not persist and appears to be with this unit, disconnect the unit from the telephone line and discontinue use of the unit until it is repaired. Please note that the telephone company may ask that you disconnect the equipment from the telephone network until the problem has been corrected or until you are sure that the equipment is not malfunctioning. The user must use the accessories and cables supplied by the manufacturer to get optimum performance from the product. 19

Appendix C Regulatory Information Canada Avis d’Industrie Canada concernant l’exposition aux radio- fréquences : The following information applies if you use the product within Canada. Ce matériel est conforme aux limites établies par IC en matière d’exposition aux radiofréquences dans un Industry Canada Statement environnement non contrôlé. Ce matériel doit être installé et utilisé à une distance d’au moins 20 cm entre l’antenne This device complies with Industry Canada ICES-003 and et le corps de l’utilisateur. RSS210 rules. L’émetteur ne doit pas être placé près d’une autre antenne Operation is subject to the following two conditions: ou d’un autre émetteur, ou fonctionner avec une autre 1. This device may not cause interference and antenne ou un autre émetteur. 2. This device must accept any interference, including interference that may cause undesired operation of Wireless Disclaimer the device. This device has been designed to operate The maximum performance for wireless is derived from with an antenna having a maximum gain of 2dBi. IEEE Standard 802.11 specifications. Actual performance Antenna having a higher gain is strictly prohibited per can vary, including lower wireless network capacity, regulations of Industry Canada. The required antenna data throughput rate, range and coverage. Performance impedance is 50 ohms. depends on many factors, conditions and variables, To reduce potential radio interference to other users, including distance from the access point, volume of the antenna type and its gain should be so chosen network traffic, building materials and construction, that the EIRP is not more than required for successful operating system used, mix of wireless products used, communication. interference and other adverse conditions. Industry Canada Radiation Exposure Statement: Avis de non-responsabilité concernant les appar- This equipment complies with IC radiation exposure limits eils sans fil set forth for an uncontrolled environment. This equipment Les performances maximales pour les réseaux sans fil should be installed and operated with minimum distance sont tirées des spécifications de la norme IEEE 802.11. 20cm between the radiator & your body. Les performances réelles peuvent varier, notamment This transmitter must not be co-located or operating in en fonction de la capacité du réseau sans fil, du débit conjunction with any other antenna or transmitter. de la transmission de données, de la portée et de la couverture. Les performances dépendent de facteurs, Avis d’Industrie Canada conditions et variables multiples, en particulier de la distance par rapport au point d’accès, du volume du trafic Cet appareil est conforme aux normes NMB003 et RSS210 réseau, des matériaux utilisés dans le bâtiment et du d’Industrie Canada. type de construction, du système d’exploitation et de la L’utilisation de ce dispositif est autorisée seulement aux combinaison de produits sans fil utilisés, des interférences conditions suivantes : et de toute autre condition défavorable. 1. il ne doit pas produire de brouillage et 2. il doit accepter tout brouillage radioélectrique reçu, même si ce brouillage est susceptible de compromettre le fonctionnement du dispositif. Le dispositif a été conçu pour fonctionner avec une antenne ayant un gain maximum de 2 dBi. Les règlements d’Industrie Canada interdisent strictement l’utilisation d’antennes dont le gain est supérieur à cette limite. L’impédance requise de l’antenne est de 50 ohms. Afin de réduire le risque d’interférence aux autres utilisateurs, le type d’antenne et son gain doivent être choisis de façon à ce que la puissance isotrope rayonnée équivalente (p.i.r.e.) ne soit pas supérieure au niveau requis pour obtenir une communication satisfaisante. 3425-01414 090605-10_20-10C-AI 20


Document Created: 2010-08-30 17:00:56
Document Modified: 2010-08-30 17:00:56
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC