CORRESPONDENCE SUMMARY

FCC ID: LD7TLST

Cover Letter(s)

Download: PDF
FCCID_603997

Correspondence Summary Q&A November 17, 2005 SUBJECT: XEROX CORPORATION - FCC ID: JD7TLST 1. Question about additional justification needed for Modular approval - RF shield requirement of item 1 of DA001407. Answer: The module complies with the radiated emissions requirements for the applicable rule parts in its current state. Additional shielding to satisfy these requirements is not necessary. Furthermore, this particular module has a specific installation configuration. The module will be attached to the metal L-bracket as shown in the operational description. The purpose of the module will be to exchange information with the toner bottle inside a copier or printer. As a result the side of the module not facing the L- bracket will be facing the toner cartridge. The typical implementation of this module will be such that there no cables directly over or under the module that may be coupled to. Please reference the user manual to see the typical installation of the module. Additionally, the relatively low power intentionally radiated by the equipment should also help to reduce the probability of unintended coupling within host devices. TIMCO ENGINEERING INC. 849 NW State Road 45 Newberry, Florida 32669 http://www.timcoengr.com 888.472.2424 F 352.472.2030 tei@timcoengr.com


Document Created: 2005-11-18 14:28:55
Document Modified: 2005-11-18 14:28:55
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC