test report

FCC ID: L73RM-Y807

Test Report

Download: PDF
FCCID_179825

A-028-01-C Page 1 of 15 FCC ID: L73RM-Y807 Designated by Ministry of international Trade and industry KANSAI ELECTRONIC INDUSTRY DEVELOPMENT CENTER HEAD OFFICE IKOMA TESTING LABORATORY 6-8-7 NISHITENMA 12128 TAKAYAMA-CHO KITA-KU OSAKA 530-0047 JAPAN IKOMA-CITY NARA 630-0101 JAPAN Corporate Juridical Person TEST REPORT Report No.A-028-01-C Date: 24 October 2001 This test report is to certify that the tested device properly complies with the requirements of: FCC Rules and Regulations Part 15 Subpart C Intentional Radiators. All the tests necessary to show compliance to the requirements were performed and these results met the specifications of requirement. The results of this report should not be construed to imply compliance of equipment other than that, which was tested. Unless the laboratory permission, this report should not be copied in part. 1. Applicant Company Name : SANWA ELECTRONIC INSTRUMENT CO., LTD. Mailing Address : 1-2-50, YOSHIDA HONMACHI, HIGASHI-OSAKA, 578-0982 Japan 2. Identification of Tested Device Type of Device : Transmitter Kind of Equipment Authorization : : DoC : Certification : Verification FCC ID : L73RM-Y807 Device Name : REMOTE CONTROL TRANSMITTER Trade Name : SONY Model Number : RM-Y807 Serial Number : 010001 : Prototype : Pre-production : Production Date of Manufacture : October 2001 3. Test Items and Procedure : AC Power Line Conducted Emission Measurement : Radiated Emission Measurement : Emission Bandwidth Measurement Above all tests were performed under: ANSI C63.4 – 1992 : without deviation, : with deviation(details are found inside of this report) 4. Date of Test Receipt of Test Sample : 17 October 2001 Test Completed on : 19 October 2001 Eizo Hariya General Manager/ Ikoma Testing Laboratory KEC Ikoma Testing Laboratory 12128 Takayama-cho Ikoma-city Nara 630-0101 Japan


Document Created: 2019-09-01 03:56:45
Document Modified: 2019-09-01 03:56:45
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC