RF Exposure Information

FCC ID: L73-90486

RF Exposure Info

Download: PDF
FCCID_2587734

FCC ID:L73-90486 IC:7377A-90486 RF EXPOSURE TEST FCC ID:L73-90486 IC:7377A-90486 SAR Test Exclusion Thresholds for 100 MHz – 6 GHz and ≤ 50 mm Approximate SAR Test Exclusion Power Thresholds at Selected Frequencies and Test Separation Distances are illustrated in the following Table. The 1-g and 10-g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances ≤ 50 mm are determined by: [(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)] · [√f(GHz)] ≤ 3.0 for 1-g SAR and ≤ 7.5 for 10-g extremity SAR,16 where  f(GHz) is the RF channel transmit frequency in GHz  Power and distance are rounded to the nearest mW and mm before calculation17  The result is rounded to one decimal place for comparison The test exclusions are applicable only when the minimum test separation distance is ≤ 50 mm and for transmission frequencies between 100 MHz and 6 GHz. When the minimum test separation distance is < 5 mm, a distance of 5 mm is applied to determine SAR test exclusion.

FCC ID:L73-90486 IC:7377A-90486 According to RSS-102 Issue 5 Section 2.5.1: SAR evaluation is required if the separation distance between the user and/or bystander and the antenna and/or radiating element of the device is less than or equal to 20 cm, except when the device operates at or below the applicable output power level (adjusted for tune-up tolerance) for the specified separation distance defined in Table 1.

FCC ID:L73-90486 IC:7377A-90486 Test Results: This is a portable device for general public use, which will be hand-held by users during normal operation with an antenna separation distance to the body of not less than 15 mm in worst case (between the antenna base and handle of EUT).

FCC ID:L73-90486 IC:7377A-90486 Location of Antenna Note: Separation distance between the user and radiating element of device >15mm.

FCC ID:L73-90486 IC:7377A-90486 For FCC: Maximum Rated Peak RF power for OP: 9 dBm. Maximum Maximum Exclusion Rated Peak RF Conducted modulation Thresholds Limit power Output Power Results (dBm) (mW) FHSS 9 7.94 0.822 3.0 Conclusion: No SAR is required. Note: Exclusion Thresholds Results=[(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)] ·[√f(GHz)] f(GHz) is the RF channel transmit frequency in GHz  Distance=15mm Maximum measured transmitter power. Maximum Peak Maximum frequency Exclusion Conducted Conducted range Thresholds Limit Output Power Output Power Results (MHz) (dBm) (mW) 2410 8.65 7.33 0.759 3.0 2437 8.72 7.45 0.775 3.0 2465 8.69 7.40 0.774 3.0 Conclusion: No SAR is required. Note: Exclusion Thresholds Results=[(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)] ·[√f(GHz)] f(GHz) is the RF channel transmit frequency in GHz  Distance=15mm

FCC ID:L73-90486 IC:7377A-90486 For IC: Maximum Rated Peak RF power for OP: 9dBm. Maximum Maximum Rated Peak RF Rated Peak RF Limit modulation power power (mW) (dBm) (mW) FHSS 9 7.94 15 Conclusion: No SAR is required. EIRP EIRP Limit modulation (dBm) (mW) (mW) FHSS 11.7 14.79 15 Note: The antenna gain max is 2.7dB, EIRP= Rated Peak RF power + antenna gain Conclusion: No SAR is required. Maximum measured transmitter power. Maximum Peak Maximum frequency Conducted Conducted Limit range Output Power (mW) Output Power (MHz) (dBm) (mW) 2403 8.65 7.33 15 2442 8.72 7.45 15 2478 8.69 7.40 15 Conclusion: No SAR is required. ----------------The End---------------


Document Created: 2015-04-13 16:08:37
Document Modified: 2015-04-13 16:08:37
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC