RF Exposure Report Appendix A

FCC ID: L6ARDD70UW

RF Exposure Info

Download: PDF
FCCID_1523197

                               Document                                                                                Page
                               Appendix A for the BlackBerry® Smartphone Model RDD71UW SAR Report                      1(15)


Author Data                    Dates of Test                       Test Report No           FCC ID:           IC ID
Andrew Becker                  Apr 13 – June 16, 2011              RTS-2579-1106-34         L6ARDD70UW 2503A-RDD70UW

              APPENDIX A: SAR DISTRIBUTION COMPARISON FOR ACCURACY VERIFICATION




              This report shall NOT be reproduced except in full without the written consent of RIM Testing Services
              Copyright 2005-2011, RIM Testing Services, a division of Research In Motion Limited


                               Document                                                                                Page
                               Appendix A for the BlackBerry® Smartphone Model RDD71UW SAR Report                      2(15)


Author Data                    Dates of Test                       Test Report No           FCC ID:           IC ID
Andrew Becker                  Apr 13 – June 16, 2011              RTS-2579-1106-34         L6ARDD70UW 2503A-RDD70UW



                                      Date/Time: 5/10/2011 1:36:37 AM, Date/Time: 5/10/2011 1:41:27 AM

              Test Laboratory: RIM Testing Services

              DipoleValidation_835MHz_Amb_Tem_23.4_Liq_Tem_22.4C_05_10_11

              DUT: Dipole 835 MHz; Type: D835V2; Serial: D835V2 - SN:446

              Communication System: CW; Frequency: 835 MHz;Communication System PAR: 0 dB
              Medium parameters used: f = 835 MHz; σ = 0.922 mho/m; εr = 42.279; ρ = 1000 kg/m3
              Phantom section: Flat Section
              Measurement Standard: DASY5 (IEEE/IEC/ANSI C63.19-2007)

              DASY5 Configuration:

                  •   Probe: ES3DV3 - SN3225; ConvF(6.47, 6.47, 6.47); Calibrated: 1/13/2011
                  •   Sensor-Surface: 4mm (Mechanical Surface Detection)
                  •   Electronics: DAE3 Sn473; Calibrated: 1/21/2011
                  •   Phantom: SAM 1; Type: SAM 4.0; Serial: 1076
                  •   Measurement SW: DASY52, Version 52.6 (2); SEMCAD X Version 14.4.4
                      (2829)


              Configuration/d=15mm, Pin=1000mW/Area Scan (31x121x1): Measurement
              grid: dx=15mm, dy=15mm
              Maximum value of SAR (interpolated) = 10.770 mW/g

              Configuration/d=15mm, Pin=1000mW/Zoom Scan (5x5x7) 2 (7x7x7)/Cube
              0: Measurement grid: dx=5mm, dy=5mm, dz=5mm
              Reference Value = 106.3 V/m; Power Drift = -0.09 dB
              Peak SAR (extrapolated) = 14.698 W/kg
              SAR(1 g) = 9.81 mW/g; SAR(10 g) = 6.42 mW/g
              Maximum value of SAR (measured) = 10.562 mW/g




              This report shall NOT be reproduced except in full without the written consent of RIM Testing Services
              Copyright 2005-2011, RIM Testing Services, a division of Research In Motion Limited


                               Document                                                                                Page
                               Appendix A for the BlackBerry® Smartphone Model RDD71UW SAR Report                      3(15)


Author Data                    Dates of Test                       Test Report No           FCC ID:           IC ID
Andrew Becker                  Apr 13 – June 16, 2011              RTS-2579-1106-34         L6ARDD70UW 2503A-RDD70UW




                       0 dB = 10.560mW/g




              This report shall NOT be reproduced except in full without the written consent of RIM Testing Services
              Copyright 2005-2011, RIM Testing Services, a division of Research In Motion Limited


                               Document                                                                                Page
                               Appendix A for the BlackBerry® Smartphone Model RDD71UW SAR Report                      4(15)


Author Data                    Dates of Test                       Test Report No           FCC ID:           IC ID
Andrew Becker                  Apr 13 – June 16, 2011              RTS-2579-1106-34         L6ARDD70UW 2503A-RDD70UW

                                        Date/Time: 6/6/2011 12:45:15 PM, Date/Time: 6/6/2011 12:50:01 PM

              Test Laboratory: RIM Testing Services

              DipoleValidation_835MHz_Amb_Tem_23.0_Liq_Tem_22.5C_06_06_11

              DUT: Dipole 835 MHz; Type: D835V2; Serial: D835V2 - SN:446

              Communication System: CW; Frequency: 835 MHz;Communication System PAR: 0 dB
              Medium parameters used: f = 835 MHz; σ = 0.894 mho/m; εr = 40.155; ρ = 1000 kg/m3
              Phantom section: Flat Section
              Measurement Standard: DASY5 (IEEE/IEC/ANSI C63.19-2007)

              DASY5 Configuration:

                  •   Probe: ES3DV3 - SN3225; ConvF(6.47, 6.47, 6.47); Calibrated: 1/13/2011
                  •   Sensor-Surface: 4mm (Mechanical Surface Detection)
                  •   Electronics: DAE3 Sn472; Calibrated: 3/7/2011
                  •   Phantom: SAM 1; Type: SAM 4.0; Serial: 1076
                  •   Measurement SW: DASY52, Version 52.6 (2); SEMCAD X Version 14.4.4
                      (2829)


              Configuration/d=15mm, Pin=1000mW/Area Scan (31x121x1): Measurement
              grid: dx=15mm, dy=15mm
              Maximum value of SAR (interpolated) = 9.820 mW/g

              Configuration/d=15mm, Pin=1000mW/Zoom Scan (5x5x7) 2 (7x7x7)/Cube
              0: Measurement grid: dx=5mm, dy=5mm, dz=5mm
              Reference Value = 107.4 V/m; Power Drift = -0.03 dB
              Peak SAR (extrapolated) = 13.991 W/kg
              SAR(1 g) = 9.28 mW/g; SAR(10 g) = 6.05 mW/g
              Maximum value of SAR (measured) = 10.043 mW/g




              This report shall NOT be reproduced except in full without the written consent of RIM Testing Services
              Copyright 2005-2011, RIM Testing Services, a division of Research In Motion Limited


                               Document                                                                                Page
                               Appendix A for the BlackBerry® Smartphone Model RDD71UW SAR Report                      5(15)


Author Data                    Dates of Test                       Test Report No           FCC ID:           IC ID
Andrew Becker                  Apr 13 – June 16, 2011              RTS-2579-1106-34         L6ARDD70UW 2503A-RDD70UW




                       0 dB = 10.040mW/g




              This report shall NOT be reproduced except in full without the written consent of RIM Testing Services
              Copyright 2005-2011, RIM Testing Services, a division of Research In Motion Limited


                               Document                                                                                Page
                               Appendix A for the BlackBerry® Smartphone Model RDD71UW SAR Report                      6(15)


Author Data                    Dates of Test                       Test Report No           FCC ID:           IC ID
Andrew Becker                  Apr 13 – June 16, 2011              RTS-2579-1106-34         L6ARDD70UW 2503A-RDD70UW

                                        Date/Time: 4/13/2011 3:11:32 PM, Date/Time: 4/13/2011 3:14:07 PM

              Test Laboratory: RIM Testing Services

              DipoleValidation_1800MHz_Amb_Tem_24.2_Liq_Tem_22.5C

              DUT: Dipole 1800 MHz; Type: D1800V2; Serial: D1800V2 - SN:2d020

              Communication System: CW; Frequency: 1800 MHz;Communication System PAR: 0 dB
              Medium parameters used: f = 1800 MHz; σ = 1.382 mho/m; εr = 38.11; ρ = 1000 kg/m3
              Phantom section: Flat Section
              Measurement Standard: DASY5 (IEEE/IEC/ANSI C63.19-2007)

              DASY5 Configuration:

                  •   Probe: ES3DV3 - SN3225; ConvF(5.26, 5.26, 5.26); Calibrated: 1/13/2011
                  •   Sensor-Surface: 4mm (Mechanical Surface Detection)
                  •   Electronics: DAE3 Sn473; Calibrated: 1/21/2011
                  •   Phantom: SAM 1; Type: SAM 4.0; Serial: 1076
                  •   Measurement SW: DASY52, Version 52.6 (2); SEMCAD X Version 14.4.4
                      (2829)


              Configuration/d=15mm, Pin=1000mW/Area Scan (31x61x1): Measurement
              grid: dx=15mm, dy=15mm
              Maximum value of SAR (interpolated) = 41.635 mW/g

              Configuration/d=15mm, Pin=1000mW/Zoom Scan (5x5x7) 2 (7x7x7)/Cube
              0: Measurement grid: dx=5mm, dy=5mm, dz=5mm
              Reference Value = 176.0 V/m; Power Drift = 0.0026 dB
              Peak SAR (extrapolated) = 68.469 W/kg
              SAR(1 g) = 36.8 mW/g; SAR(10 g) = 19.2 mW/g
              Maximum value of SAR (measured) = 41.499 mW/g




              This report shall NOT be reproduced except in full without the written consent of RIM Testing Services
              Copyright 2005-2011, RIM Testing Services, a division of Research In Motion Limited


                               Document                                                                                Page
                               Appendix A for the BlackBerry® Smartphone Model RDD71UW SAR Report                      7(15)


Author Data                    Dates of Test                       Test Report No           FCC ID:           IC ID
Andrew Becker                  Apr 13 – June 16, 2011              RTS-2579-1106-34         L6ARDD70UW 2503A-RDD70UW




                       0 dB = 41.500mW/g




              This report shall NOT be reproduced except in full without the written consent of RIM Testing Services
              Copyright 2005-2011, RIM Testing Services, a division of Research In Motion Limited


                               Document                                                                                Page
                               Appendix A for the BlackBerry® Smartphone Model RDD71UW SAR Report                      8(15)


Author Data                    Dates of Test                       Test Report No           FCC ID:           IC ID
Andrew Becker                  Apr 13 – June 16, 2011              RTS-2579-1106-34         L6ARDD70UW 2503A-RDD70UW



                                        Date/Time: 5/3/2011 9:59:00 AM, Date/Time: 5/3/2011 10:01:36 AM

              Test Laboratory: RIM Testing Services

              DipoleValidation_1900MHz_Amb_Tem_23.0_Liq_Tem_22.0_05_03_11

              DUT: Dipole 1900 MHz; Type: D1900V2; Serial: D1900V2 - SN:545

              Communication System: CW; Frequency: 1900 MHz;Communication System PAR: 0 dB
              Medium parameters used: f = 1900 MHz; σ = 1.354 mho/m; εr = 38.058; ρ = 1000 kg/m3
              Phantom section: Flat Section
              Measurement Standard: DASY5 (IEEE/IEC/ANSI C63.19-2007)

              DASY5 Configuration:

                  •   Probe: ES3DV3 - SN3225; ConvF(5.26, 5.26, 5.26); Calibrated: 1/13/2011
                  •   Sensor-Surface: 4mm (Mechanical Surface Detection)
                  •   Electronics: DAE3 Sn473; Calibrated: 1/21/2011
                  •   Phantom: SAM 1; Type: SAM 4.0; Serial: 1076
                  •   Measurement SW: DASY52, Version 52.6 (2); SEMCAD X Version 14.4.4
                      (2829)


              Configuration/d=15mm, Pin=1000mW/Area Scan (31x61x1): Measurement
              grid: dx=15mm, dy=15mm
              Maximum value of SAR (interpolated) = 42.866 mW/g

              Configuration/d=15mm, Pin=1000mW/Zoom Scan (5x5x7) 2 (7x7x7)/Cube
              0: Measurement grid: dx=5mm, dy=5mm, dz=5mm
              Reference Value = 177.3 V/m; Power Drift = -0.04 dB
              Peak SAR (extrapolated) = 67.802 W/kg
              SAR(1 g) = 37.3 mW/g; SAR(10 g) = 19.6 mW/g
              Maximum value of SAR (measured) = 41.985 mW/g




              This report shall NOT be reproduced except in full without the written consent of RIM Testing Services
              Copyright 2005-2011, RIM Testing Services, a division of Research In Motion Limited


                               Document                                                                                Page
                               Appendix A for the BlackBerry® Smartphone Model RDD71UW SAR Report                      9(15)


Author Data                    Dates of Test                       Test Report No           FCC ID:           IC ID
Andrew Becker                  Apr 13 – June 16, 2011              RTS-2579-1106-34         L6ARDD70UW 2503A-RDD70UW




                       0 dB = 41.990mW/g




              This report shall NOT be reproduced except in full without the written consent of RIM Testing Services
              Copyright 2005-2011, RIM Testing Services, a division of Research In Motion Limited


                               Document                                                                                Page
                               Appendix A for the BlackBerry® Smartphone Model RDD71UW SAR Report                      10(15)


Author Data                    Dates of Test                        Test Report No          FCC ID:           IC ID
Andrew Becker                  Apr 13 – June 16, 2011               RTS-2579-1106-34        L6ARDD70UW 2503A-RDD70UW

                                               Date/Time: 6/8/2011 8:25:06 PM, Date/Time: 6/8/2011 8:27:42 PM

              Test Laboratory: RIM Testing Services

              DipoleValidation_1900MHz_Amb_Tem_23.7_Liq_Tem_22.9_06_08_11

              DUT: Dipole 1900 MHz; Type: D1900V2; Serial: D1900V2 - SN:545

              Communication System: CW; Frequency: 1900 MHz;Communication System PAR: 0 dB
              Medium parameters used: f = 1900 MHz; σ = 1.373 mho/m; εr = 39.77; ρ = 1000 kg/m3
              Phantom section: Flat Section
              Measurement Standard: DASY5 (IEEE/IEC/ANSI C63.19-2007)

              DASY5 Configuration:

                  •   Probe: ES3DV3 - SN3225; ConvF(5.26, 5.26, 5.26); Calibrated: 1/13/2011
                  •   Sensor-Surface: 4mm (Mechanical Surface Detection)
                  •   Electronics: DAE3 Sn472; Calibrated: 3/7/2011
                  •   Phantom: SAM 1; Type: SAM 4.0; Serial: 1076
                  •   Measurement SW: DASY52, Version 52.6 (2); SEMCAD X Version 14.4.4
                      (2829)


              Configuration/d=15mm, Pin=1000mW/Area Scan (31x61x1): Measurement
              grid: dx=15mm, dy=15mm
              Maximum value of SAR (interpolated) = 44.456 mW/g

              Configuration/d=15mm, Pin=1000mW/Zoom Scan (5x5x7) 2 (7x7x7)/Cube
              0: Measurement grid: dx=5mm, dy=5mm, dz=5mm
              Reference Value = 180.3 V/m; Power Drift = 0.0046 dB
              Peak SAR (extrapolated) = 70.827 W/kg
              SAR(1 g) = 38.9 mW/g; SAR(10 g) = 20.4 mW/g
              Maximum value of SAR (measured) = 43.683 mW/g




              This report shall NOT be reproduced except in full without the written consent of RIM Testing Services
              Copyright 2005-2011, RIM Testing Services, a division of Research In Motion Limited


                               Document                                                                                Page
                               Appendix A for the BlackBerry® Smartphone Model RDD71UW SAR Report                      11(15)


Author Data                    Dates of Test                       Test Report No           FCC ID:           IC ID
Andrew Becker                  Apr 13 – June 16, 2011              RTS-2579-1106-34         L6ARDD70UW 2503A-RDD70UW




                       0 dB = 43.680mW/g




              This report shall NOT be reproduced except in full without the written consent of RIM Testing Services
              Copyright 2005-2011, RIM Testing Services, a division of Research In Motion Limited


                               Document                                                                                Page
                               Appendix A for the BlackBerry® Smartphone Model RDD71UW SAR Report                      12(15)


Author Data                    Dates of Test                       Test Report No           FCC ID:           IC ID
Andrew Becker                  Apr 13 – June 16, 2011              RTS-2579-1106-34         L6ARDD70UW 2503A-RDD70UW

                                   Date/Time: 4/26/2011 11:31:28 PM, Date/Time: 4/26/2011 11:33:21 PM

              Test Laboratory: RIM Testing Services

              DipoleValidation_2450MHz_Amb_Tem_23.5_Liq_Tem_22.3C

              DUT: Dipole 2450 MHz; Type: D2450V2; Serial: D2450V2 - SN:747

              Communication System: CW; Frequency: 2450 MHz;Communication System PAR: 0 dB
              Medium parameters used: f = 2450 MHz; σ = 1.886 mho/m; εr = 39.002; ρ = 1000 kg/m3
              Phantom section: Flat Section
              Measurement Standard: DASY5 (IEEE/IEC/ANSI C63.19-2007)

              DASY5 Configuration:

                  •   Probe: ES3DV3 - SN3225; ConvF(4.6, 4.6, 4.6); Calibrated: 1/13/2011
                  •   Sensor-Surface: 4mm (Mechanical Surface Detection)
                  •   Electronics: DAE3 Sn473; Calibrated: 1/21/2011
                  •   Phantom: SAM 1; Type: SAM 4.0; Serial: 1076
                  •   Measurement SW: DASY52, Version 52.6 (2); SEMCAD X Version 14.4.4
                      (2829)


              Configuration/d=15mm, Pin=1000mW/Area Scan (31x41x1): Measurement
              grid: dx=15mm, dy=15mm
              Maximum value of SAR (interpolated) = 65.108 mW/g

              Configuration/d=15mm, Pin=1000mW/Zoom Scan (5x5x7) 2 (7x7x7)/Cube
              0: Measurement grid: dx=5mm, dy=5mm, dz=5mm
              Reference Value = 180.5 V/m; Power Drift = 0.05 dB
              Peak SAR (extrapolated) = 115.1 W/kg
              SAR(1 g) = 56 mW/g; SAR(10 g) = 25.9 mW/g
              Maximum value of SAR (measured) = 63.463 mW/g




              This report shall NOT be reproduced except in full without the written consent of RIM Testing Services
              Copyright 2005-2011, RIM Testing Services, a division of Research In Motion Limited


                               Document                                                                                Page
                               Appendix A for the BlackBerry® Smartphone Model RDD71UW SAR Report                      13(15)


Author Data                    Dates of Test                       Test Report No           FCC ID:           IC ID
Andrew Becker                  Apr 13 – June 16, 2011              RTS-2579-1106-34         L6ARDD70UW 2503A-RDD70UW




                       0 dB = 63.460mW/g




              This report shall NOT be reproduced except in full without the written consent of RIM Testing Services
              Copyright 2005-2011, RIM Testing Services, a division of Research In Motion Limited


                               Document                                                                                Page
                               Appendix A for the BlackBerry® Smartphone Model RDD71UW SAR Report                      14(15)


Author Data                    Dates of Test                       Test Report No           FCC ID:           IC ID
Andrew Becker                  Apr 13 – June 16, 2011              RTS-2579-1106-34         L6ARDD70UW 2503A-RDD70UW

                                        Date/Time: 6/15/2011 7:18:50 PM, Date/Time: 6/15/2011 7:20:41 PM

              Test Laboratory: RIM Testing Services

              DipoleValidation_2450MHz_Amb_Tem_23.4_Liq_Tem_22.0C_06_15_11

              DUT: Dipole 2450 MHz; Type: D2450V2; Serial: D2450V2 - SN:747

              Communication System: CW; Frequency: 2450 MHz;Communication System PAR: 0 dB
              Medium parameters used: f = 2450 MHz; σ = 1.879 mho/m; εr = 40.287; ρ = 1000 kg/m3
              Phantom section: Flat Section
              Measurement Standard: DASY5 (IEEE/IEC/ANSI C63.19-2007)

              DASY5 Configuration:

                  •   Probe: ES3DV3 - SN3225; ConvF(4.6, 4.6, 4.6); Calibrated: 1/13/2011
                  •   Sensor-Surface: 4mm (Mechanical Surface Detection)
                  •   Electronics: DAE3 Sn472; Calibrated: 3/7/2011
                  •   Phantom: SAM 1; Type: SAM 4.0; Serial: 1076
                  •   Measurement SW: DASY52, Version 52.6 (2); SEMCAD X Version 14.4.4
                      (2829)


              Configuration/d=15mm, Pin=1000mW/Area Scan (31x41x1): Measurement
              grid: dx=15mm, dy=15mm
              Maximum value of SAR (interpolated) = 65.541 mW/g

              Configuration/d=15mm, Pin=1000mW/Zoom Scan (5x5x7) 2 (7x7x7)/Cube
              0: Measurement grid: dx=5mm, dy=5mm, dz=5mm
              Reference Value = 184.2 V/m; Power Drift = -0.02 dB
              Peak SAR (extrapolated) = 114.6 W/kg
              SAR(1 g) = 54.6 mW/g; SAR(10 g) = 25.3 mW/g
              Maximum value of SAR (measured) = 62.317 mW/g




              This report shall NOT be reproduced except in full without the written consent of RIM Testing Services
              Copyright 2005-2011, RIM Testing Services, a division of Research In Motion Limited


                               Document                                                                                Page
                               Appendix A for the BlackBerry® Smartphone Model RDD71UW SAR Report                      15(15)


Author Data                    Dates of Test                       Test Report No           FCC ID:           IC ID
Andrew Becker                  Apr 13 – June 16, 2011              RTS-2579-1106-34         L6ARDD70UW 2503A-RDD70UW




                       0 dB = 62.320mW/g




              This report shall NOT be reproduced except in full without the written consent of RIM Testing Services
              Copyright 2005-2011, RIM Testing Services, a division of Research In Motion Limited



Document Created: 2011-06-27 17:36:20
Document Modified: 2011-06-27 17:36:20

© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC