Label Specs

FCC ID: L2V-STX3

ID Label/Location Info

Download: PDF
FCCID_2173201

Document # 9100-0276-01 STX3 Labeling Specification STX3 Labeling Specification This specification applies to the STX3 (2100-0333-01) and all products derived from this assembly either through firmware changes or hardware modifications. Label Material All labels shall be polyimide thermal transfer labels. Temperature Rating: -40 – 1000°F Compliance: RoHS, REACH, Restriction use of Halogen IEC 61249-2-21 Bar Code Label (7450-0143-01) All units will have applied an ESN bar code label which has been generated using the Globalstar STX3 label printer software. No barcode labels from any other source are to be used. This label must be applied to the device in the specified location prior to testing on the automated test fixture. See Figure 1 for the required location of the label. Page 1

Document # 9100-0276-01 STX3 Labeling Specification Label Physical Requirements All labels will meet the following requirements: Label dimensions: 13mm x 24.5mm Max (or equivalent standard label size) Label Material: polyimide material Label Color: White Font Color: Black Location: See Figure 1 TOP VIEW Affix ESN Label here Orientation: White Dot on Silkscreen (PIN 1) Figure 1 STX3 Label Locations Page 2


Document Created: 2013-10-03 19:53:16
Document Modified: 2013-10-03 19:53:16
© 2025 FCC.report
This site is not affiliated with or endorsed by the FCC