RF Exposure

FCC ID: L2C0072TR

RF Exposure Info

Download: PDF
FCCID_3780958

Delphi Electronics & Safety FCC ID: L2C0072TR; IC: 3432A-0072TR 4 FCC § 2.1091 & ISEDC RSS-102 – RF Exposure 4.1 Applicable Standard According to FCC §1.1307(b)(1), systems operating under the provisions of this section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy level in excess of the Commission’s guidelines. Limits for General Population/Uncontrolled Exposure Frequency Electric Field Magnetic Field Power Density Averaging Time Range Strength Strength (mW/cm2) (minutes) (MHz) (V/m) (A/m) Limits for General Population/Uncontrolled Exposure 0.3-1.34 614 1.63 * (100) 30 2 1.34-30 824/f 2.19/f * (180/f ) 30 30-300 27.5 0.073 0.2 30 300-1500 / / f/1500 30 1500-100,000 / / 1.0 30 f = frequency in MHz * = Plane-wave equivalent power density Before equipment certification is granted, the procedure of IC RSS-102 must be followed concerning the exposure of humans to RF field According to ISED RSS-102 Issue 5: Report Number: R1711272-95 Page 12 of 36 FCC Part 95/ISEDC RSS-252 Test Report

Delphi Electronics & Safety FCC ID: L2C0072TR; IC: 3432A-0072TR 4.2 MPE Prediction Predication of MPE limit at a given distance, Equation from OET Bulletin 65, Edition 97-01 S = PG/4R² Where: S = power density P = power input to antenna G = power gain of the antenna in the direction of interest relative to an isotropic radiator R = distance to the center of radiation of the antenna 4.3 MPE Results Maximum tuned output power at antenna input terminal (dBm): 20 Maximum tuned output power at antenna input terminal (mW): 100 Prediction distance (cm): 20 Prediction frequency (MHz): 5910 Maximum Antenna Gain, typical (dBi): 6 Maximum Antenna Gain (numeric): 3.98 Power density of prediction frequency at 20 cm (mW/cm2): 0.08 MPE limit for uncontrolled exposure at prediction frequency (mW/cm2): 1 The device compliances with FCC MPE limit at 20 cm distance. 4.4 RF exposure evaluation exemption for IC 20 + 6.0 dBi = 26 dBm < 1.31×10-2f0.6834 = 4.952 W = 36.94 dBm Therefore the RF exposure is not required. Report Number: R1711272-95 Page 13 of 36 FCC Part 95/ISEDC RSS-252 Test Report


Document Created: 2018-03-14 23:19:10
Document Modified: 2018-03-14 23:19:10
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC