Operational Description

FCC ID: L2C0028TR

Operational Description

Download: PDF

FCCID_610888

The TSSM2 system provides a secure method of allowing communications of commands between the
Customer Identification Device (CID) and the TSSM2. Once the IGN/RUN switch is activated the TSSM2
controller will initiate the uplink process that is a 125 KHZ transmition, if the operator carries a valid CID
it will generate a 433.92MHZ downlink in response to the incoming signal, the whole process takes around
100ms and it is intended to disable the security and immobilization function and allow the engine to start.

System-Level Functional Description
a. The TSSM2 system is a multi-component system that implements the following features:
1) Vehicle Turn Signal Functions
(a) Manual Turn Signal Control
(b) Automatic Turn Signal Cancellation
(c) Four-way (Hazard) Flashing
(d) Turn Signal Diagnostics
2) Tip-Over Shutdown Functions
3) Security Alarm and Immobilization Functions
(a) Security Arming and Disarming
(b) Security Warning and Alarm
(c) Starter and Fuel Immobilization
4) Power Moding Functions
5) Feature Customization Functions
6) Diagnostic Functions

Document Created: 2005-11-20 16:09:51
Document Modified: 2005-11-20 16:09:51

© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC