Test Report_RF Exposure

FCC ID: KUTNV001

RF Exposure Info

Download: PDF
FCCID_4070153

RF EXPOSURE EVALUATION Report No. : AW0048973(9) Date: Aug 30, 2018 Application No. : LW024138(7) Applicant : Capital Prospect Ltd. Sample Description : One(1) item of submitted sample stated to be Product Descriptin : Garage Door Internet Gateway Model : NV-001 Sample registration No. : RW023136-001(5) Radio Frequency : 910 – 918MHz; 2410 – 2462MHz Supply voltage : 100 – 240Vac, 50/60Hz No. of submitted sample : 1 FCC ID : KUTNV001 Date Received : July 31, 2018 Evaluation Period : August 2, 2018 – August 29, 2018 Evaluation Method : 447498 D01 General RF Exposure Guidance v06 - RF Exposure Procedure and Equipment Authorization Policies for Mobile and Portable Devices Conclusion : The maximum simultaneous power of WiFi and 900MHz operation were satisfied RF exposure requirements. For and on behalf of CMA Industrial Development Foundation Limited Authorized Signature : Page 1 of 2 Mr. WONG Lap-pong, Andrew Manager Electrical Division Document name: FCC RF exposure - Document Ref No: RT-EL-EMC-008 - Issue Date: 01 Dec 2017 - Edition: 1

RF EXPOSURE EVALUATION Report No. : AW0048973(9) Date: Aug 30, 2018 Simultaneous power The device can operate the 900MHz and WiFi IEEE 802.11b/g/n transmitter simultaneously. Therefore the simultandous power shall be evaluated for the RF exposure compliance of FCC rule. RF Exposure Evaluation Calculation 1) WiFi transmitter (FCC ID: 2ADUIESP-12-F) According to the RF exposure report of the FCC application with FCC ID: 2AQDUIESP-12-F, - The worst case (IEEE 802.11b mode) total power density @ 20cm : 0.00997mW/cm2 - Limit : 1.0mW/cm2 - Result : PASS 2) 900MHz transmitter According to the test result from the FCC test report AW0048972(8), - Measured field strength @ 3m : 87.2dBµV/m - Calculated e.i.r.p. : 0.155mW (-8.1dBm) - Calculated Power density @ 20cm : 0.00003mW/cm2 - Limit : 0.60667mW/cm2 - Result : PASS 3) Simultaneous transmission According to above calculation, - Weighted Power Density @ 20cm to limit (WiFi) : 0.00997 - Weighted Power Density @ 20cm to limit (900MHz transmitter) : 0.00005 - Total weighted power density @ 20cm : 0.01002 - Limit : 1.0 - Result : PASS Conclusion Based on above calculation, the MPEs of two transmitters individually and simultaneously meet the requirement of OET Bulletin 65 and KDB447498 D01 v06. ***** End of Evaluation ***** Page 2 of 2 Document name: FCC RF exposure - Document Ref No: RT-EL-EMC-008 - Issue Date: 01 Dec 2017 - Edition: 1


Document Created: 2018-11-12 09:16:55
Document Modified: 2018-11-12 09:16:55
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC