User Manual

FCC ID: KUTG6V

Users Manual

Download: PDF
FCCID_828722

Universal Visor Transmitter Model G6V 1. INTRODUCTION 5. BATTERY Congratulations on your purchase of the Skylink® Universal Visor Trans- 12 volt alkaline battery (size 23A) mitter Model G6V. The Model G6V works with the Skylink Smart ButtonTM. included. In this package, you will find a visor remote with 12V battery. Universal Visor Transmitter (Battery included) Visor clip 6. ADDITIONAL TRANSMITTER 2. PROGRAM A VISOR REMOTE TO THE GTR SMART BUTTONTM You can add up to 15 additional transmitters to control the same receiver. Skylink® offers Keychain Transmitters and Keypad Transmitters to work with your receiver. For Refer to the section in the Skylink® model GTR to install the Smart Button TM more information, please visit our website at and follow the instructions below to program the transmitter. www.skylinkhome.com or contact us. 1. With the GTR Smart ButtonTM connected on your existing wall button. The red light on the Smart ButtonTM should flash after plugging in the power. If the red light on the Smart ButtonTM is flashing 7. WARNING slowly, that indicates it is in standby mode. 2. Press the learn button on the side of the GTR. DO NOT let children use the garage door transmitter without adult supervision. 3. Once the learn button is pressed, the red LED Children can injure themselves or others by the garage door. will flash quickly. You may release the learn button. 4. Press the button on the transmitter you would 8. FCC like to program. 5. Once the transmitter is programmed, the red The Garage Door Remote Control is approved by the FCC and it complies with LED will flash slowly, in the same way as it Learn Button Part 15 of the FCC Rules. Its operation is subject to the following two conditions : flashes in standby mode. 1. This device may not cause harmful interference. 6. You can now operate the garage door opener 2. This device must accept any interference that may cause undesired operation. with this new remote control. WARNING: Changes or modifications to this unit not expressly approved by the party responsible of compliance could void the user’s authority to operate the equipment. 3. TROUBLE SHOOTING 9. WARRANTY Q: Door opener does not react after pressing the button on the transmitter? A: - Ensure the button on the transmitter is pressed, the red light on the If, within one year from date of purchase, this product should become defective transmitter comes on. Otherwise, check if the battery is inserted (except battery), due to faulty workmanship or materials, it will be repaired or replaced, without charge. Proof of purchase and a Return Authorization are required. properly. - Ensure the wires that are previous connected to the wall mounted door control are not loose. 10. CUSTOMER SERVICE - Ensure the remote control has been programmed to the Smart ButtonTM. Refer to section 2 for how to program a transmitter to the If you would like to order Skylink’s product or have difficulty getting your Skylink receiver. remote control to work, please : 1. visit our FAQ section at www.skylinkhome.com, or 2. email us at support@skylinkhome.com, or 3. call our toll free at 1-800-304-1187 from Monday to Friday, 9 am to 5 pm EST. 4. REMOVE THE REMOTE CONTROL FROM THE SMART BUTTONTM Fax (800) 286-1320 You can delete the remote control(s) from the Smart ButtonTM, first delete all the remote controls, then learn the ones you would like to keep. CUSTOMER SERVICE 1. Press and hold the learn button for approx 10 seconds on the Smart 17 Sheard Avenue, Brampton, Ontario, Canada L6Y 1J3 ButtonTM . Email:support@skylinkhome.com 2. The LED will flash rapidly after 10 seconds to indicate all the pro- http://www.skylinkhome.com grammed remote controls have been erased. You may now release P/N. 101Z487 US Patent. D377458 the learn button. ® are registered trademarks of their respective corporations 3. You have erased all the remote controls in the Smart ButtonTM . ©2007 SKYLINK GROUP


Document Created: 2019-06-05 00:37:03
Document Modified: 2019-06-05 00:37:03
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC