RF Exposure Report

FCC ID: KNK-678-2C

RF Exposure Info

Download: PDF
FCCID_3144204

Test Number: 290-16DR1 Issue Date: 9/21/2016 6. Measurement Data (continued) 6.6. Public Exposure to Radio Frequency Energy Levels (1.1307 (b)(1)) 6.6.1. SAR Test Exclusion Calculation Requirement: Portable devices as defined in § 2.1093 of this chapter operating under Part 15 are subject to radio frequency radiation exposure requirements as specified in §§ 1.1307(b) and 2.1093 of this chapter. Test Notes: For frequencies below 100 MHz, the following may be considered for SAR test exclusion. For test separation distances > 50 mm and < 200mm, the power threshold at the corresponding test separation distance at 100 MHz is multiplied by (1+log (100 / f(MHz)). For test separation distances ≤ 50mm, the power threshold determined by the above equation is multiplied by ½. Appendix C SAR Test Exclusion @ 100 MHz = 237 mW SAR Test Exclusion 50mm = 237 *(1+log (100 / 6.78)) = 514 mW SAR Test Exclusion ≤50mm = 514 * 0.5 = 257 mW (1) FCC OET 447498 - Mobile and Portable Devices RF Exposure Procedures and Equipment Authorization Policies. Result: The device under test meets the exclusion requirement detailed in FCC OET 447498. 6.78 MHz Input: PMAX 0.00019 mW Limit Exemption: 257 mW 1 Taken from the peak data in Section 6.3 of this test report (converted to mW). Note: The EUT does not support simultaneous transmission in order to conserve battery life. The device does not exceed the test limit exemption and therefore a routine SAR Evaluation is not required Page 24 of 28 Compliance Worldwide, Inc. - 357 Main Street - Sandown, NH 03873 (603) 887 3903 Fax (603) 887 6445 www.complianceworldwide.com


Document Created: 2016-09-21 18:41:32
Document Modified: 2016-09-21 18:41:32
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC