Test Report 1

FCC ID: KBCIX600-MC8765

Test Report

Download: PDF
FCCID_703234

Spectrum Technology IX600-MC8765 July 21, 2006 Report No. SPTE0026.1 Report Prepared By www.nwemc.com 1-888-EMI-CERT © 2006 Northwest EMC, Inc

22975 NW Evergreen Parkway Suite 400 Hillsboro, Oregon 97124 Certificate of Test Issue Date: July 21, 2006 Spectrum Technology Model: IX600-MC8765 Emissions Test Description Specification Test Method Pass Fail Radiated Emissions FCC 15.109(a) Class B:2005-10 ANSI C63.4:2003 Conducted Emissions FCC 15.107 Class B:2005-10 ANSI C63.4:2003 Modifications made to the product See the Modifications section of this report Approved By: Greg Kiemel, Director of Engineering This report must not be used to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the federal government of the United States of America. Product compliance is the responsibility of the client, therefore the tests and equipment modes of operation represented in this report were agreed upon by the client, prior to testing. This Report may only be duplicated in its entirety. The results of this test pertain only to the sample(s) tested, the specific description is noted in each of the individual sections of the test report supporting this certificate of test. Report No. SPTE0026.1 2/19

Northwest Revision History EMC Revision 05/05/03 Revision Description Date Page Number Number 00 None Report No. SPTE0026.1 3/19

Northwest Accreditations and Authorizations EMC Revision 03/18/05 FCC: Accredited by NVLAP for performance of FCC radio, digital, and ISM device testing. Our Open Area Test Sites, certification chambers, and conducted measurement facilities have been fully described in reports filed with the FCC and accepted by the FCC in letters maintained in our files. Northwest EMC has been accredited by ANSI to ISO / IEC Guide 65 as a product certifier. We have been designated by the FCC as a Telecommunications Certification Body (TCB). This allows Northwest EMC to certify transmitters to FCC specifications in accordance with 47 CFR 2.960 and 2.962. NVLAP: Northwest EMC, Inc. is accredited under the United States Department of Commerce, National Institute of Standards and Technology, and National Voluntary Laboratory Accreditation Program for satisfactory compliance with the requirements of ISO/IEC 17025 for Testing Laboratories. The NVLAP accreditation encompasses Electromagnetic Compatibility Testing in accordance with the European Union EMC Directive 89/336/EEC, ANSI C63.4, MIL- NVLAP LAB CODE 200629-0 STD 461E, DO-160D and SAE J1113. Additionally, Northwest EMC is accredited by NVLAP to NVLAP LAB CODE 200630-0 perform radio testing in accordance with the European Union R&TTE Directive 1999/5/EEC, the NVLAP LAB CODE 200676-0 requirements of FCC, and the RSS radio standards for Industry Canada. Industry Canada: Accredited by NVLAP for performance of Industry Canada RSS and ICES testing. Our Open Area Test Sites and certification chambers comply with RSS 212, Issue 1 (Provisional) and have been filed with Industry Canada and accepted. Northwest EMC has been accredited by ANSI to ISO / IEC Guide 65 as a product certifier. We have been designated by NIST and recognized by Industry Canada as a Certification Body (CB) per the APEC Mutual Recognition Arrangement (MRA). This allows Northwest EMC to certify transmitters to Industry Canada technical requirements. CAB: Designated by NIST and validated by the European Commission as a Conformity Assessment Body (CAB) to conduct tests and approve products to the EMC directive and transmitters to the R&TTE directive, as described in the U.S. - EU Mutual Recognition Agreement. TÜV Product Service: Included in TUV Product Service Group's Listing of Recognized Laboratories. It qualifies in connection with the TUV Certification after Recognition of Agent's Testing Program for the product categories and/or standards shown in TUV's current Listing of CARAT Laboratories, available from TUV. A certificate was issued to represent that this laboratory continues to meet TUV's CARAT Program requirements. Certificate No. USA0401C. TÜV Rheinland: Authorized to carryout EMC tests by order and under supervision of TÜV Rheinland. This authorization is based on "Conditions for EMC-Subcontractors" of November 1992. Report No. SPTE0026.1 4/19

Northwest Accreditations and Authorizations EMC Revision 03/18/05 NEMKO: Assessed and accredited by NEMKO (Norwegian testing and certification body) for European emissions and immunity testing. As a result of NEMKO's laboratory assessment, they will accept test results from Northwest EMC, Inc. for product certification (Authorization No. ELA 119). Australia/New Zealand: The National Association of Testing Authorities (NATA), Australia has been appointed by the ACA as an accreditation body to accredit test laboratories and competent bodies for EMC standards. Accredited test reports or assessments by competent bodies must carry the NATA logo. Test reports made by an overseas laboratory that has been accredited for the relevant standards by an overseas accreditation body that has a Mutual Recognition Agreement (MRA) with NATA are also accepted as technical grounds for product conformity. The report should be endorsed with the respective logo of the accreditation body (NVLAP). VCCI: Accepted as an Associate Member to the VCCI, Acceptance No. 564. Conducted and radiated measurement facilities have been registered in accordance with Regulations for Voluntary Control Measures, Article 8. (Registration Numbers. - Hillsboro: C-1071, R-1025, and R-2318, Irvine: C-2094 and R-1943, Sultan: R-871, C-1784 and R-1761). BSMI: Northwest EMC has been designated by NIST and validated by C-Taipei (BSMI) as a CAB to conduct tests as described in the APEC Mutual Recognition Agreement. License No.SL2-IN-E-1017. GOST: Northwest EMC, Inc. has been assessed and accredited by the Russian Certification bodies Certinform VNIINMASH, CERTINFO, SAMTES, and Federal CHEC, to perform EMC and Hygienic testing for Information Technology Products. As a result of their laboratory assessment, they will accept test results from Northwest EMC, Inc. for product certification SCOPE For details on the Scopes of our Accreditations, please visit: http://www.nwemc.com/scope.asp Report No. SPTE0026.1 5/19

California – Orange County Facility Labs OC01 – OC13 41 Tesla Ave. Irvine, CA 92618 (888) 364-2378 Fax: (503) 844-3826 Oregon – Evergreen Facility Labs EV01 – EV11 22975 NW Evergreen Pkwy. Suite 400 Hillsboro, OR 97124 (503) 844-4066 Fax: (503) 844-3826 Washington – Sultan Facility Labs SU01 – SU07 14128 339th Ave. SE Sultan, WA 98294 (888) 364-2378 Report No. SPTE0026.1 6/19

Northwest Product Description EMC Revision 10/3/03 Party Requesting the Test Company Name: Spectrum Technology, Inc. Address: 209 Dayton Street Suite #205 City, State, Zip: Edmonds, WA 98020 Test Requested By: Rod Munro Model: IX600-MC8765 First Date of Test: June 06, 2006 Last Date of Test: June 16, 2006 Receipt Date of Samples: May 30, 2006 Equipment Design Stage: Production Equipment Condition: No visual damage. Information Provided by the Party Requesting the Test Functional Description of the EUT (Equipment Under Test): GSM/GPRS radio installed in an Itronix notebook computer. Client Justification for Test Selection: These tests are required to demonstrate compliance with FCC 15B requirements for the digital portion of the GSM/GPRS radio while configured in the Itronix IX600 notebook computer. Report No. SPTE0026.1 7/19

Northwest Configurations EMC Revision 9/21/05 CONFIGURATION 3 SPTE0026 Software/Firmware Running during test Description Version Procomm Plus Terminal 4.8 Build 71 EUT Description Manufacturer Model/Part Number Serial Number EUT Itronix, Corp. IX600-MC8765 359226000004984 Peripherals in test setup boundary Description Manufacturer Model/Part Number Serial Number Internal Antenna Skycross 59-0479-001 Unknown Host IX600 Notebook PC Itronix, Corp. IX-600 None Host IX600 Notebook PC Itronix, Corp. IX-600 ZZGEG6072ZZ5515 AC Adapter Delta Electronics SADP-65KB D 92W0540003980 AC Adapter Delta Electronics SADP-65KB D 92W0540003970 CF Card Reader Itronix, Corp. SDDR-91 None Mouse Logitech M-BE58 LZE02357693 Headphones Unknown None None Cables Cable Type Shield Length (m) Ferrite Connection 1 Connection 2 AC Power No 1.8m No AC Adapter AC Mains USB Yes 1.0m No Host IX600 Notebook PC Unterminated USB Yes 1.0m No Host IX600 Notebook PC CF Card Reader Serial Yes 1.0m No Host IX600 Notebook PC Unterminated Ethernet Yes 1.0m No Host IX600 Notebook PC Unterminated Modem Yes 1.0m No Host IX600 Notebook PC Unterminated Microphone Yes 1.0m No Host IX600 Notebook PC Unterminated Speaker Yes 1.0m No Host IX600 Notebook PC Headphones VGA Yes 1.0m No Host IX600 Notebook PC Unterminated PA = Cable is permanently attached to the device. Shielding and/or presence of ferrite may be unknown. Report No. SPTE0026.1 8/19

Northwest Modifications EMC Revision 4/28/03 Equipment modifications Item Date Test Modification Note Disposition of EUT Tested as No EMI suppression EUT remained at Conducted 1 6/6/2006 delivered to devices were added or Northwest EMC Emissions Test Station. modified during this test. following the test. Tested as No EMI suppression Radiated Scheduled testing 2 6/16/2006 delivered to devices were added or Emissions was completed. Test Station. modified during this test. Report No. SPTE0026.1 9/19

NORTHWEST PSA 2006.05.30 EMC RADIATED EMISSIONS Testing was performed using the mode(s) of operation and configuration(s) noted within the report. The individuals and/or the organization requesting the test provided the modes, configurations and settings used to complete the evaluation. The actual test parameters are specified in the test data, this includes items such as investigated frequency range (scanned) and test levels. The testing methods and performance specifications, as well as the test site used for the evaluation are indicated in the test data. MODES OF OPERATION Receive mode GSM Cellular band POWER SETTINGS INVESTIGATED 120VAC/60Hz FREQUENCY RANGE INVESTIGATED Start Frequency 30 MHz Stop Frequency 5 GHz CLOCKS AND OSCILLATORS Unknown SAMPLE CALCULATIONS Radiated Emissions: Field Strength = Measured Level + Antenna Factor + Cable Factor - Amplifier Gain + Distance Adjustment Factor + External Attenuation TEST EQUIPMENT Description Manufacturer Model ID Last Cal. Interval Pre-Amplifier Miteq AMF-4D-010100-24-10P APW 8/2/2005 13 Pre-Amplifier Miteq AM-1616-1000 AOL 1/4/2006 13 Antenna, Biconilog EMCO 3141 AXE 12/28/2005 24 Antenna, Horn EMCO 3115 AHC 8/30/2005 12 Spectrum Analyzer Agilent E4446A AAT 4/4/2006 12 MEASUREMENT BANDWIDTHS Frequency Range Peak Data Quasi-Peak Data Average Data (MHz) (kHz) (kHz) (kHz) 0.01 - 0.15 1.0 0.2 0.2 0.15 - 30.0 10.0 9.0 9.0 30.0 - 1000 100.0 120.0 120.0 Above 1000 1000.0 N/A 1000.0 Measurements were made using the bandwidths and detectors specified. No video filter was used. MEASUREMENT UNCERTAINTY Measurement uncertainty is used to reflect the accuracy of the measured result as compared with its "true" or theoretically correct value. Our measurement data meets or exceeds the measurement uncertainty requirements of CISPR 16-4. In the case of transient tests our test equipment has been demonstrated by calibration to provide at least a 95% confidence that it complies with the test specification requirements. The measurement uncertainty for any test is available upon request. TEST DESCRIPTION Using the mode of operation and configuration noted within this report, a final radiated emissions test was performed. The frequency range investigated (scanned), is also noted in this report. Radiated emissions measurements were made at the EUT azimuth and antenna height such that the maximum radiated emissions level will be detected. This requires the use of a turntable and an antenna positioner. The preferred method of a continuous azimuth search is utilized for frequency scans of the EUT field strength with both polarities of the measuring antenna. A calibrated, linearly polarized antenna was positioned at the specified distance from the periphery of the EUT. Tests were made with the antenna positioned in both the horizontal and vertical planes of polarization. The antenna was varied in height above the conducting ground plane to obtain the maximum signal strength. Though specified in the report, the measurement distance shall be 3 meters or 10 meters. At any measurement distance, the antenna height was varied from 1 meter to 4 meters. These height scans apply for both horizontal and vertical polarization, except that for vertical polarization the minimum height of the center of the antenna shall be increased so that the lowest point of the bottom of the antenna clears the ground surface by at least 25 cm. Report No. SPTE0026.1 10/19

NORTHWEST PSA 2006.05.30 EMC RADIATED EMISSIONS DATA SHEET EMI 2006.6.15 EUT: IX600-MC8765 Work Order: SPTE0026 Serial Number: 359226000004984 Date: 06/16/06 Customer: Spectrum Technology Temperature: 23 Attendees: None Humidity: 41% Project: None Barometric Pres.: 29.98 Tested by: Holly Ashkannejhad Power: 120VAC/60Hz Job Site: EV01 TEST SPECIFICATIONS Test Method FCC 15.109(a) Class B:2005-10 ANSI C63.4:2003 TEST PARAMETERS Antenna Height(s) (m) 1-4 Test Distance (m) 3 COMMENTS Internal antenna. Notebook configuration. EUT OPERATING MODES Receive mode GSM Cellular band DEVIATIONS FROM TEST STANDARD No deviations. Run # 37 Configuration # 3 Results Pass NVLAP Lab Code 200630-0 Signature 120.0 100.0 80.0 dBuV/m 60.0 40.0 20.0 0.0 10.000 100.000 1000.000 MHz External Distance Compared to Freq Amplitude Factor Azimuth Height Distance Attenuation Polarity Detector Adjustment Adjusted Spec. Limit Spec. (MHz) (dBuV) (dB) (degrees) (meters) (meters) (dB) (dB) dBuV/m dBuV/m (dB) 166.639 44.4 -5.2 338.0 1.7 3.0 0.0 H-Bilog QP 0.0 39.2 43.5 -4.3 762.967 31.4 9.3 149.0 1.2 3.0 0.0 V-Bilog QP 0.0 40.7 46.0 -5.3 166.639 42.4 -5.2 172.0 1.0 3.0 0.0 V-Bilog QP 0.0 37.2 43.5 -6.3 497.616 31.5 4.8 305.0 1.7 3.0 0.0 H-Bilog QP 0.0 36.3 46.0 -9.7 500.006 30.7 4.8 56.0 1.0 3.0 0.0 V-Bilog QP 0.0 35.5 46.0 -10.5 433.324 31.4 3.6 210.0 1.0 3.0 0.0 H-Bilog QP 0.0 35.0 46.0 -11.0 366.657 32.4 2.2 31.0 1.7 3.0 0.0 V-Bilog QP 0.0 34.6 46.0 -11.4 366.649 32.2 2.2 22.0 1.5 3.0 0.0 V-Bilog QP 0.0 34.4 46.0 -11.6 829.293 23.9 10.2 95.0 1.9 3.0 0.0 V-Bilog QP 0.0 34.1 46.0 -11.9 60.018 33.8 -6.4 360.0 3.1 3.0 0.0 V-Bilog QP 0.0 27.4 40.0 -12.6 829.292 22.2 10.2 237.0 1.0 3.0 0.0 H-Bilog QP 0.0 32.4 46.0 -13.6 64.010 32.8 -6.8 301.0 3.3 3.0 0.0 V-Bilog QP 0.0 26.0 40.0 -14.0 432.021 24.9 3.6 226.0 1.5 3.0 0.0 V-Bilog QP 0.0 28.5 46.0 -17.5 364.942 18.8 2.1 2.0 3.4 3.0 0.0 H-Bilog QP 0.0 20.9 46.0 -25.1 Report No. SPTE0026.1 11/19

NORTHWEST PSA 2006.05.30 EMC RADIATED EMISSIONS DATA SHEET EMI 2006.6.15 EUT: IX600-MC8765 Work Order: SPTE0026 Serial Number: 359226000004984 Date: 06/16/06 Customer: Spectrum Technology Temperature: 23 Attendees: None Humidity: 41% Project: None Barometric Pres.: 29.98 Tested by: Holly Ashkannejhad Power: 120VAC/60Hz Job Site: EV01 TEST SPECIFICATIONS Test Method FCC 15.209(a):2005-9 ANSI C63.4:2003 TEST PARAMETERS Antenna Height(s) (m) 1-4 Test Distance (m) 3 COMMENTS Internal antenna. Notebook configuration. EUT OPERATING MODES Receive mode GSM Cellular band DEVIATIONS FROM TEST STANDARD No deviations. Run # 38 Configuration # 3 Results Pass NVLAP Lab Code 200630-0 Signature 120.0 100.0 80.0 dBuV/m 60.0 40.0 20.0 0.0 1000.000 1500.000 2000.000 2500.000 3000.000 3500.000 4000.000 4500.000 5000.000 MHz External Distance Compared to Freq Amplitude Factor Azimuth Height Distance Attenuation Polarity Detector Adjustment Adjusted Spec. Limit Spec. (MHz) (dBuV) (dB) (degrees) (meters) (meters) (dB) (dB) dBuV/m dBuV/m (dB) 2280.071 31.1 0.0 71.0 1.0 3.0 0.0 V-Horn AV 0.0 31.1 54.0 -22.9 1595.320 31.6 -2.9 278.0 1.2 3.0 0.0 H-Horn AV 0.0 28.7 54.0 -25.3 1030.980 33.4 -5.3 331.0 1.2 3.0 0.0 H-Horn AV 0.0 28.1 54.0 -25.9 1592.390 51.0 -2.9 278.0 1.2 3.0 0.0 H-Horn PK 0.0 48.1 74.0 -25.9 2280.056 27.8 0.0 277.0 1.2 3.0 0.0 H-Horn AV 0.0 27.8 54.0 -26.2 1595.940 30.5 -2.9 347.0 1.1 3.0 0.0 V-Horn AV 0.0 27.6 54.0 -26.4 2499.720 27.1 0.5 128.0 1.0 3.0 0.0 V-Horn AV 0.0 27.6 54.0 -26.4 1030.960 32.4 -5.3 37.0 1.0 3.0 0.0 V-Horn AV 0.0 27.1 54.0 -26.9 2488.080 26.1 0.5 149.0 1.2 3.0 0.0 H-Horn AV 0.0 26.6 54.0 -27.4 1600.410 49.0 -2.9 347.0 1.1 3.0 0.0 V-Horn PK 0.0 46.1 74.0 -27.9 2488.030 45.5 0.5 128.0 1.0 3.0 0.0 V-Horn PK 0.0 46.0 74.0 -28.0 1107.442 30.4 -5.0 10.0 1.0 3.0 0.0 V-Horn AV 0.0 25.4 54.0 -28.6 1200.050 28.7 -4.5 203.0 1.0 3.0 0.0 V-Horn AV 0.0 24.2 54.0 -29.8 1191.970 27.5 -4.5 -1.0 1.5 3.0 0.0 H-Horn AV 0.0 23.0 54.0 -31.0 2495.600 42.4 0.5 149.0 1.2 3.0 0.0 H-Horn PK 0.0 42.9 74.0 -31.1 2280.118 41.1 0.0 71.0 1.0 3.0 0.0 V-Horn PK 0.0 41.1 74.0 -32.9 1028.470 46.2 -5.3 331.0 1.2 3.0 0.0 H-Horn PK 0.0 40.9 74.0 -33.1 1107.446 25.2 -5.0 221.0 1.2 3.0 0.0 H-Horn AV 0.0 20.2 54.0 -33.8 1033.210 45.4 -5.3 37.0 1.0 3.0 0.0 V-Horn PK 0.0 40.1 74.0 -33.9 2279.819 39.3 0.0 277.0 1.2 3.0 0.0 H-Horn PK 0.0 39.3 74.0 -34.7 1199.920 41.9 -4.5 203.0 1.0 3.0 0.0 V-Horn PK 0.0 37.4 74.0 -36.6 Report No. SPTE0026.1 12/19

External Distance Compared to Freq Amplitude Factor Azimuth Height Distance Attenuation Polarity Detector Adjustment Adjusted Spec. Limit Spec. (MHz) (dBuV) (dB) (degrees) (meters) (meters) (dB) (dB) dBuV/m dBuV/m (dB) 1107.265 40.7 -5.0 10.0 1.0 3.0 0.0 V-Horn PK 0.0 35.7 74.0 -38.3 1198.890 39.0 -4.5 -1.0 1.5 3.0 0.0 H-Horn PK 0.0 34.5 74.0 -39.5 1107.689 37.7 -5.0 221.0 1.2 3.0 0.0 H-Horn PK 0.0 32.7 74.0 -41.3 Report No. SPTE0026.1 13/19


NORTHWEST ACQ-2006.05.30 EMC CONDUCTED EMISSIONS Testing was performed using the mode(s) of operation and configuration(s) noted within the report. The individuals and/or the organization requesting the test provided the modes, configurations and settings used to complete the evaluation. The actual test parameters are specified in the test data, this includes items such as investigated frequency range (scanned) and test levels. The testing methods and performance specifications, as well as the test site used for the evaluation are indicated in the test data. MODES OF OPERATION Receive mode GSM Cellular band POWER SETTINGS INVESTIGATED 120VAC/60Hz SAMPLE CALCULATIONS Conducted Emissions: Adjusted Level = Measured Level + Transducer Factor + Cable Attenuation Factor + External Attenuator TEST EQUIPMENT Description Manufacturer Model ID Last Cal. Interval Spectrum Analyzer Hewlett-Packard 8568B AAI 12/21/2005 13 Quasi-Peak Adapter Hewlett-Packard 85650A AQD 12/21/2005 13 High Pass Filter T.T.E. 7766 HFG 12/19/2005 13 LISN Solar 9252-50-R-24-BNC LIQ 12/13/2005 13 MEASUREMENT BANDWIDTHS Frequency Range Peak Data Quasi-Peak Data Average Data (MHz) (kHz) (kHz) (kHz) 0.01 - 0.15 1.0 0.2 0.2 0.15 - 30.0 10.0 9.0 9.0 30.0 - 1000 100.0 120.0 120.0 Above 1000 1000.0 N/A 1000.0 Measurements were made using the bandwidths and detectors specified. No video filter was used. MEASUREMENT UNCERTAINTY Measurement uncertainty is used to reflect the accuracy of the measured result as compared with its "true" or theoretically correct value. Our measurement data meets or exceeds the measurement uncertainty requirements of CISPR 16-4. In the case of transient tests our test equipment has been demonstrated by calibration to provide at least a 95% confidence that it complies with the test specification requirements. The measurement uncertainty for any test is available upon request. TEST DESCRIPTION Using the mode of operation and configuration noted within this report, conducted emissions tests were performed. The frequency range investigated (scanned), is also noted in this report. Conducted power line measurements are made, unless otherwise specified, over the frequency range from 150 kHz to 30 MHz to determine the line-to-ground radio-noise voltage that is conducted from the EUT power-input terminals that are directly (or indirectly via separate transformer or power supplies) connected to a public power network. Equipment is tested with power cords that are normally used or that have electrical or shielding characteristics that are the same as those cords normally used. Typically those measurements are made using a LISN (Line Impedance Stabilization Network), the 50 Ω measuring port is terminated by a 50 Ω EMI meter or a 50 Ω resistive load. All 50 Ω measuring ports of the LISN are terminated by 50Ω. Report No. SPTE0026.1 15/19

NORTHWEST ACQ-2006.05.30 EMC CONDUCTED EMISSIONS DATA SHEET EMI 2005.9.18 EUT: IX600-MC8765 Work Order: SPTE0026 Serial Number: 359226000004984 Date: 06/06/06 Customer: Spectrum Technology Temperature: 23 Attendees: None Humidity: 47% Project: Noe Barometric Pres.: 29.98 Tested by: Rod Peloquin Power: 120VAC/60Hz Job Site: EV07 TEST SPECIFICATIONS Test Method FCC 15.107 Class B:2005-10 ANSI C63.4:2003 TEST PARAMETERS Cable or Line Tested L1 COMMENTS Internal antenna. Notebook standalone configuration. EUT OPERATING MODES Receive mode GSM Cellular band. DEVIATIONS FROM TEST STANDARD No deviations. Run # 1 Configuration # 3 Results Pass NVLAP Lab Code 200630-0 Signature 80 70 60 50 dBuV 40 30 20 10 0 0.1 1 10 100 MHz External Compared to Freq Amplitude Transducer Cable Attenuation Detector Adjusted Spec. Limit Spec. (blank equal peaks (MHz) (dBuV) (dB) (dB) (dB) dBuV dBuV (dB) [PK] from scan) 0.193 31.2 0.0 0.0 20.0 51.2 53.9 -2.7 0.745 21.3 0.0 0.0 20.0 41.3 46.0 -4.7 0.181 28.0 0.0 0.0 20.0 48.0 54.5 -6.5 0.374 21.7 0.0 0.0 20.0 41.7 48.4 -6.7 0.156 28.7 0.0 0.0 20.0 48.7 55.7 -7.0 0.175 26.6 0.0 0.0 20.0 46.6 54.7 -8.1 4.527 17.4 0.0 0.0 20.0 37.4 46.0 -8.6 0.263 22.7 0.0 0.0 20.0 42.7 51.4 -8.7 4.977 17.3 0.0 0.0 20.0 37.3 46.0 -8.7 4.637 16.7 0.0 0.0 20.0 36.7 46.0 -9.3 4.847 16.7 0.0 0.0 20.0 36.7 46.0 -9.3 4.587 16.6 0.0 0.0 20.0 36.6 46.0 -9.4 4.917 16.3 0.0 0.0 20.0 36.3 46.0 -9.7 4.787 16.2 0.0 0.0 20.0 36.2 46.0 -9.8 0.810 15.8 0.0 0.0 20.0 35.8 46.0 -10.2 0.165 24.9 0.0 0.0 20.0 44.9 55.2 -10.3 4.717 15.4 0.0 0.0 20.0 35.4 46.0 -10.6 4.457 15.3 0.0 0.0 20.0 35.3 46.0 -10.7 0.171 24.2 0.0 0.0 20.0 44.2 54.9 -10.7 Report No. SPTE0026.1 16/19

NORTHWEST ACQ-2006.05.30 EMC CONDUCTED EMISSIONS DATA SHEET EMI 2005.9.18 EUT: IX600-MC8765 Work Order: SPTE0026 Serial Number: 359226000004984 Date: 06/06/06 Customer: Spectrum Technology Temperature: 23 Attendees: None Humidity: 47% Project: None Barometric Pres.: 29.98 Tested by: Rod Peloquin Power: 120VAC/60Hz Job Site: EV07 TEST SPECIFICATIONS Test Method FCC 15.107 Class B:2005-10 ANSI C63.4:2003 TEST PARAMETERS Cable or Line Tested N COMMENTS Internal antenna. Notebook standalone configuration. EUT OPERATING MODES Receive mode GSM Cellular band. DEVIATIONS FROM TEST STANDARD No deviations. Run # 2 Configuration # 3 Results Pass NVLAP Lab Code 200630-0 Signature 80 70 60 50 dBuV 40 30 20 10 0 0.1 1 10 100 MHz External Compared to Freq Amplitude Transducer Cable Attenuation Detector Adjusted Spec. Limit Spec. (blank equal peaks (MHz) (dBuV) (dB) (dB) (dB) dBuV dBuV (dB) [PK] from scan) 0.194 31.5 0.0 0.0 20.0 51.5 53.9 -2.4 0.179 28.5 0.0 0.0 20.0 48.5 54.5 -6.0 0.744 19.0 0.0 0.0 20.0 39.0 46.0 -7.0 0.260 23.7 0.0 0.0 20.0 43.7 51.4 -7.7 4.847 17.3 0.0 0.0 20.0 37.3 46.0 -8.7 0.372 19.7 0.0 0.0 20.0 39.7 48.4 -8.7 4.587 17.0 0.0 0.0 20.0 37.0 46.0 -9.0 0.322 20.6 0.0 0.0 20.0 40.6 49.7 -9.1 4.977 16.7 0.0 0.0 20.0 36.7 46.0 -9.3 4.457 16.6 0.0 0.0 20.0 36.6 46.0 -9.4 0.161 26.0 0.0 0.0 20.0 46.0 55.4 -9.4 4.787 16.4 0.0 0.0 20.0 36.4 46.0 -9.6 4.387 16.3 0.0 0.0 20.0 36.3 46.0 -9.7 4.717 15.9 0.0 0.0 20.0 35.9 46.0 -10.1 0.391 17.9 0.0 0.0 20.0 37.9 48.0 -10.1 4.917 15.7 0.0 0.0 20.0 35.7 46.0 -10.3 0.153 25.1 0.0 0.0 20.0 45.1 55.9 -10.8 4.657 14.9 0.0 0.0 20.0 34.9 46.0 -11.1 0.170 23.8 0.0 0.0 20.0 43.8 55.0 -11.2 Report No. SPTE0026.1 17/19


t=~ge>> 8 >


Document Created: 2006-09-06 14:17:15
Document Modified: 2006-09-06 14:17:15
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC