RF peak output power

FCC ID: KBCIX260PROA580BT

Test Report

Download: PDF
FCCID_544224

Model: BT2022 FCC ID: HSW-BT2022M 6.4 Peak Output Power Requirement - FCC Section 15.247(b) The peak output power of the EUT was made at the antenna connector using a Rhode & Schwarz ESMI Spectrum Analyzer. For the measurement, the EUT was caused to generate a constant carrier. Results are shown below in Table 6.4-1 and a plot of the worst case is shown in Figure 6.4-1. Table 6.4-1: Peak Output Power Frequency Output Power Channel (MHz) (dBm) Low 2402 15.43 Center 2441 15.59 High 2480 15.31 Figure 6.4-1: Output power ACS Report: 03-0193-15BC Advanced Compliance Solutions Page 9


Document Created: 2004-10-20 18:13:18
Document Modified: 2004-10-20 18:13:18
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC