Power Density

FCC ID: KBCIX260MPIBM3900

Test Report

Download: PDF
FCCID_402050

360 Herndon Parkway Suite 1400 Herndon, VA 20170 http://www.rheintech.com 11 POWER SPECTRAL DENSITY TEST DATA The Power spectral density per FCC 15.247(d) was measured from the antenna port of the EUT using a 50 ohm spectrum analyzer with the resolution bandwidth set at 3kHz, the video bandwidth set at 3kHz, and the sweep time set at 17 second. The spectral lines were resolved for the modulated carriers at 2.412GHz, 2.442GHz and 2.462GHz respectively. These levels are well below the +8 dBm limit. See power spectral density table below and the plots in Section 16 of this report. TABLE 27: POWER SPECTRAL DENSITY Channel Power Spectral Density limit = +8dBm 1 -12.3 6 -11.6 11 -13.9 Certification Report For: Cisco System Page 36 Document Number: 2001041 Revision 4

360 Herndon Parkway Suite 1400 Herndon, VA 20170 http://www.rheintech.com 16 SPECTRAL DENSITY PLOTS PLOT 21: CHANNEL 1 Certification Report For: Cisco System Page 65 Document Number: 2001041 Revision 4

360 Herndon Parkway Suite 1400 Herndon, VA 20170 http://www.rheintech.com PLOT 22: CHANNEL 6 Certification Report For: Cisco System Page 66 Document Number: 2001041 Revision 4

360 Herndon Parkway Suite 1400 Herndon, VA 20170 http://www.rheintech.com PLOT 23: CHANNEL 11 Certification Report For: Cisco System Page 67 Document Number: 2001041 Revision 4


Document Created: 2002-12-23 14:36:50
Document Modified: 2002-12-23 14:36:50
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC