EMC Test Report

FCC ID: KBCIX100XA750WLBT

Test Report

Download: PDF
FCCID_462905

TIMCO ENGINEERING INC.
849 NW State Road 45
Newberry, Florida 32669
http://www.timcoengr.com
888.472.2424 F 352.472.2030 email: tei@timcoengr.com




                                           Test Report

                              Product Name: WLAN AND BLUE TOOTH

                                   FCC ID: KBCIX100XA750WLBT




                                              Applicant:

                                          ITRONIX
                                       P.O. BOX 179
                                 SPOKANE WASHINGTON 99210




                              Date Receipt: MARCH 26, 2004

                              Date Tested: APRIL 15, 2004




          APPLICANT: ITRONIX
             FCC ID: KBCIX100XA750WLBT
           REPORT #: I\ITRONIX\423AUT4\423AUT4TestReport.doc
                                                                  COVER PAGE


TIMCO ENGINEERING INC.
849 NW State Road 45
Newberry, Florida 32669
http://www.timcoengr.com
888.472.2424 F 352.472.2030 email: tei@timcoengr.com


                                        TABLE OF CONTENTS


        TEST REPORT CONTAINING:

                PAGE 1.............LETTER OF EXPLANATION
                PAGE 2.............LIST OF TEST EQUIPMENT
                PAGE 3.............TEST PROCEDURES

                                     DSSS EMISSIONS
                PAGE   4.............POWERLINE CONDUCTED INTERFERENCE
                PAGE   5.............OCCUPIED BANDWIDTH AND POWER OUTPUT
                PAGE   6.............6 dB BANDWIDTH PLOT
                PAGE   7.............SPURIOUS EMISSIONS AT ANTENNA TERMINALS DATA &
                                     METHOD OF MEASURING RF CONDUCTED
                PAGE   8.............RADIATION INTERFERENCE TEST DATA
                PAGE   9.............METHOD OF MEASURING RADIATED SPURIOUS EMISSIONS
                PAGE   10-12.........RADIATED SPURIOUS EMISSIONS INTO ADJACENT
                                     RESTRICTED BANDS
                PAGE   13............POWER SPECTRAL DENSITY
                PAGE   14............POWER SPECTRAL DENSITY PLOT

                                   FHSS EMISSIONS
                PAGE 15............COVER PAGE FOR FHSS
                PAGE 16............POWERLINE CONDUCTED INTERFERENCE
                PAGE 17............NUMBER OF HOPPING CHANNELS
                PAGE 18............DWELL TIME
                PAGE 19............OCCUPIED BANDWIDTH
                PAGE 20............POWER OUTPUT
                PAGE 21............SPURIOUS EMISSIONS AT ANTENNA TERMINALS &
                                   METHOD OF MEASURING COND. SPURIOUS EMISSIONS
                PAGE 22............FIELD STRENGTH OF SPURIOUS EMISSIONS
                PAGE 23............METHOD OF MEASURING RADIATED SPURIOUS EMISSIONS


        EXHIBITS INCLUDED:

                REQUEST FOR CONFIDENTIALITY LETTER
                BLOCK DIAGRAM
                SCHEMATICS
                USERS MANUAL
                LABEL SAMPLE
                LABEL LOCATION
                EXTERNAL PHOTOGRAPHS
                INTERNAL PHOTOGRAPHS
                OPERATIONAL DESCRIPTION
                TEST SET UP PHOTOGRAPHS




          APPLICANT: ITRONIX
             FCC ID: KBCIX100XA750WLBT
           REPORT #: I\ITRONIX\423AUT4\423AUT4TestReport.doc
                                                           TABLE OF CONTENTS


TIMCO ENGINEERING INC.
849 NW State Road 45
Newberry, Florida 32669
http://www.timcoengr.com
888.472.2424 F 352.472.2030 email: tei@timcoengr.com


          APRIL 15, 2004

          Federal Communications Commission
          Authorization and Evaluation Division
          7435 Oakland Mills Road
          Columbia, MD   21046

          SUBJECT: ITRONIX

          FCC ID: KBCIX100XA750WLBT

          To Whom It May Concern:

          The attached application is for a hand held computing device that
          employs both wireless lan (802.11) and a blue tooth device.

          The unit employs internal antennas. One for blue tooth and a separate
          antenna for the wireless lan. The wireless lan antenna has a gain of
          –4 dBi and the blue tooth antenna has a gain of +2.4 dBi.

          Should you have any questions or require any further information with
          regards to this, please feel free to contact me.

                                                Sincerely,



                                                Mario R. de Aranzeta C.E.T.

          MRD/sh
          Encl.




          APPLICANT: ITRONIX
             FCC ID: KBCIX100XA750WLBT
           REPORT #: I\ITRONIX\423AUT4\423AUT4TestReport.doc
                                                           Page 1 of 23


TIMCO ENGINEERING INC.
849 NW State Road 45
Newberry, Florida 32669
http://www.timcoengr.com
888.472.2424 F 352.472.2030 email: tei@timcoengr.com



                                  EMC Equipment List
    Device         Manufacturer          Model          Serial        Cal/Char     Due Date
                                                        Number          Date
3-Meter OATS            TEI               N/A             N/A          Listed      1/13/06
                                                                      1/13/03
  Biconnical           Eaton            94455-1           1057      CAL 3/18/03    3/18/05
    Antenna
  Biconnical           Eaton            94455-1           1096      CAL 10/1/01    10/1/03
    Antenna
Double-Ridged        Electro-           RGA-180           2319      CAL 2/17/03    2/17/05
 Horn Antenna         Metrics
      LISN           Electro-          ANS-25/2           2604      CAL 10/9/01    10/9/03
                      Metrics
     LISN            Electro-           EM-7820           2682      CAL 3/12/03    3/12/05
                      Metrics
Log-Periodic           Eaton             96005            1243       CAL 5/8/03     5/8/05
    Antenna
Log-Periodic         Electro-           EM-6950           632           CHAR       10/15/03
    Antenna           Metrics                                         10/15/01
Log-Periodic         Electro-           LPA-25            1122      CAL 10/2/01    10/2/03
    Antenna           Metrics
Log-Periodic         Electro-           LPA-30            409        CAL 3/4/03     3/4/05
    Antenna           Metrics
  Peak Power             HP              8900C         2131A00545    CAL 7/2/03     7/2/05
      Meter
 Power Meter             HP              432A          1141A07655   CAL 4/15/03    4/15/05
Silver Tower             HP              8449B         3008A01075   CHAR 1/28/02   1/28/04
Preamplifier
Silver Tower             HP             85650A         3303A01844   CAL 10/14/02   10/14/04
  Quasi-Peak
    Adapter
Silver Tower             HP             85685A         2620A00294   CAL 10/14/02   10/14/04
        RF
 Preselector
Silver Tower             HP            8566B Opt       3552A22064   CAL 10/14/02   10/14/04
   Spectrum                               462          3638A08608
   Analyzer
   Tan Tower             HP            8449B-H02       3008A00372   CHAR 3/4/01    3/4/03
Preamplifier
   Tan Tower             HP             85650A         3303A01690   CAL 8/31/01    8/31/03
  Quasi-Peak
     Adapter
Tan Tower RF             HP             85685A         3221A01400   CAL 8/31/01    8/31/03
 Preselector
   Tan Tower             HP            8566B Opt       3138A07786   CAL 8/31/01    8/31/03
    Spectrum                              462          3144A20661
    Analyzer
    Harmonic             HP             11970K         3003A04991       N/A          N/A
      Mixer
       HORN           SYSTRON         DBE-520-20          N/A           N/A          N/A
                       DONNOR


            APPLICANT: ITRONIX
               FCC ID: KBCIX100XA750WLBT
             REPORT #: I\ITRONIX\423AUT4\423AUT4TestReport.doc
                                                             Page 2 of 23


TIMCO ENGINEERING INC.
849 NW State Road 45
Newberry, Florida 32669
http://www.timcoengr.com
888.472.2424 F 352.472.2030 email: tei@timcoengr.com


                                          TEST PROCEDURE

GENERAL: This report shall NOT be reproduced except in full without the
written approval of TIMCO ENGINEERING, INC.

POWER LINE CONDUCTED INTERFERENCE: The procedure used was ANSI STANDARD C63.4-
1992 using a 50uH LISN. Both lines were observed with the UUT transmitting.
The bandwidth of the spectrum analyzer was 10kHz with an appropriate sweep
speed. The ambient temperature of the UUT was 76°F with a humidity of 55%.

BANDWIDTH 6.0dB: The measurements were made with the spectrum analyzer's
resolution bandwidth (RBW)=1.0MHz and the video bandwidth (VBW) =3.0MHz and
the span set as shown on plot.

POWER OUTPUT: The RF power output was measured at the antenna feed point
using a peak power meter.

ANTENNA CONDUCTED EMISSIONS: The RBW=100 kHz, VBW=300 kHz and the span set to
10.0MHz and the spectrum was scanned from 30MHz to the 10th Harmonic of the
fundamental. Above 1.0GHz the resolution bandwidth was 1.0MHz and the VBW =
3.0MHz and the span to 50MHz.

RADIATION INTERFERENCE: The test procedure used was ANSI STANDARD C63.4-1992
using a HEWLETT PACKARD spectrum analyzer with a pre-selector. The bandwidth
(RBW) of the spectrum analyzer was 100kHz up to 1GHz and 1.0MHz above 1GHz
with an appropriate sweep speed. The VBW above 1.0GHz was = 3.0MHz. The
analyzer was calibrated in dB above a microvolt at the output of the antenna.
The ambient temperature of the UUT was 76°F with a humidity of 55%.




          APPLICANT: ITRONIX
             FCC ID: KBCIX100XA750WLBT
           REPORT #: I\ITRONIX\423AUT4\423AUT4TestReport.doc
                                                           Page 3 of 23


TIMCO ENGINEERING INC.
849 NW State Road 45
Newberry, Florida 32669
http://www.timcoengr.com
888.472.2424 F 352.472.2030 email: tei@timcoengr.com
APPLICANT:              ITRONIX

FCC ID:                 KBCIX100XA750WLBT

NAME OF TEST:           POWER LINE CONDUCTED INTERFERENCE

RULES PART NO.:         15.207

REQUIREMENTS:                                      QUASI-PEAK        AVERAGE
                             .15 – 0.5 MHz         66-56 dBuV       56-46 dBuV
                             0.5 – 5.0                56               46
                             5.0 – 30.                60               50

TEST PROCEDURE:                  ANSI STANDARD C63.4-1992.      The spectrum was scanned from .15
                                 to 30 MHz.

                                         TEST DATA (LINE 1):




                                                 LINE 2




TEST RESULTS: Both lines were observed. The measurements indicate that the unit DOES
appear to meet the FCC requirements for this class of equipment.


          APPLICANT: ITRONIX
             FCC ID: KBCIX100XA750WLBT
           REPORT #: I\ITRONIX\423AUT4\423AUT4TestReport.doc
                                                           Page 4 of 23


TIMCO ENGINEERING INC.
849 NW State Road 45
Newberry, Florida 32669
http://www.timcoengr.com
888.472.2424 F 352.472.2030 email: tei@timcoengr.com


APPLICANT:              ITRONIX

FCC ID:                 KBCIX100XA750WLBT

NAME OF TEST:           6.0dB BANDWIDTH

RULES PART NO.:         15.247(a)(2)

REQUIREMENTS:           The 6.0dB bandwidth must be greater than 500 kHz.

MEASUREMENT
DATA:                   See the following plots


NAME OF TEST:           POWER OUTPUT

RULES PART NO.:         15.247(b) 1.0Watt or +30dBm

MEASUREMENT:            14 dBm

15.247(c)               Method of Measuring RF Power output: The Peak power Sensor
                        was connected in place of the antenna.



                                                                HP
                                                                PEAK
                                                                PWR MTR
                                                                8900C



              UUT Less                 PEAK POWER
              antenna                  SENSOR HP84811A


              LAPTOP
              CPU




          *3 channels were measured and the worst case is reported here*




          APPLICANT: ITRONIX
             FCC ID: KBCIX100XA750WLBT
           REPORT #: I\ITRONIX\423AUT4\423AUT4TestReport.doc
                                                           Page 5 of 23


TIMCO ENGINEERING INC.
849 NW State Road 45
Newberry, Florida 32669
http://www.timcoengr.com
888.472.2424 F 352.472.2030 email: tei@timcoengr.com



                                           6 dB BANDWIDTH




          APPLICANT: ITRONIX
             FCC ID: KBCIX100XA750WLBT
           REPORT #: I\ITRONIX\423AUT4\423AUT4TestReport.doc
                                                           Page 6 of 23


TIMCO ENGINEERING INC.
849 NW State Road 45
Newberry, Florida 32669
http://www.timcoengr.com
888.472.2424 F 352.472.2030 email: tei@timcoengr.com

        NAME OF TEST:           SPURIOUS EMISSIONS AT ANTENNA TERMINALS

        REQUIREMENTS:           Emissions must be at least 20dB down from the
                                highest emission level within the authorized band
                                as measured with a 100 kHz RBW.

        TEST DATA:

     TF                          dB below               TF                   dB below
                     EF           carrier                         EF          carrier
    2412           2412              0                 2437      2437           0.0
                   4824             76                           4874          75.6
                   7236             89                           7311          89.6
                   7648             98                           9748          92.8

     TF                          dB below
                     EF           carrier
    2462           2462              0.0
                   4924             76.7
                   7386             87.9
                   9848            100.0
                  1715.8            72.3
                   1693             81.9
                   1980             81.8
                   2309             72.4
                  2611.9            72.3
                   2753             72.8

NOTE: THE SPECTRUM WAS SCANNED TO THE TENTH HARMONIC.

            15.247(c)           Method of Measuring RF Conducted Spurious Emissions



                                                                           HP
                                                                           Spectrum
                                                                           Analyzer
                                                                           8566B



            TRANSMITTER                50 OHM RESISTIVE
            UNDER TEST                 LOAD



                                                              ATTENUATOR


           APPLICANT: ITRONIX
              FCC ID: KBCIX100XA750WLBT
            REPORT #: I\ITRONIX\423AUT4\423AUT4TestReport.doc
                                                            Page 7 of 23


TIMCO ENGINEERING INC.
849 NW State Road 45
Newberry, Florida 32669
http://www.timcoengr.com
888.472.2424 F 352.472.2030 email: tei@timcoengr.com


15.247(c), 15.205 &15.209(b)            Field_strength_of_spurious_emissions:

REQUIREMENTS:
FIELD STRENGTH                  FIELD STRENGTH                S15.209
of Fundamental:                 of Harmonics                  30 - 88 MHz 40 dBuV/m @3M
902-928MHz                                                    88 -216 MHz 43.5
2.4-2.4835GHz                   127.37dBuV/m                  216 -960 MHz 46
                                54 dBuV/m @3m                 ABOVE 960 MHz 54dBuV/m

EMISSIONS RADIATED OUTSIDE OF THE SPECIFIED FREQUENCY BANDS, EXCEPT FOR
HARMONICS, SHALL BE ATTENUATED BY AT LEAST 50 dB BELOW THE LEVEL OF THE
FUNDAMENTAL OR TO THE GENERAL RADIATED EMISSION LIMITS IN 15.209, WHICHEVER IS
THE LESSER ATTENUATION.

REQUIREMENTS FOR EMISSIONS THAT FALL IN A RESTRICTED BAND:

        FIELD STRENGTH LIMITS FOR PEAK READINGS:                   74 dBuV/m
        FIELD STRENGTH LIMITS FOR AVERAGE READINGS:                54 dBuV/m

TEST DATA:


  Tuned         Emission        Meter         Ant.     Coax     Correction     Field      Margin
Frequency      Frequency       Reading      Polarity   Loss       Factor     Strength       dB
   MHz             MHz           dBuV                   dB          dB        dBuV/m
 2,412.0        2,412.00        72.8             H     1.91       29.26       103.97      23.40
 2,412.0       4,824.00R        14.8             H     2.65       34.14       51.59AV      2.41
 2,412.0       4,824.00R        27.2             H     2.65       34.14       63.99PK     10.01
 2,437.0        2,321.00         0.8             H     1.86       29.11        31.77      22.23
 2,437.0        2,321.00        12.0             H     1.86       29.11        42.97      11.03
 2,437.0        2,437.00        67.9             V     1.92       29.31        99.13      28.24
 2,437.0        2,437.00        71.5             H     1.92       29.30       102.72      24.65
 2,437.0       4,873.00R          7.3            V     2.66       34.19       44.15AV      9.85
 2,437.0       4,873.00R        10.0             H     2.66       34.29       46.95AV      7.05
 2,437.0       4,873.00R        18.1             V     2.66       34.19       54.95PK     19.05
 2,437.0       4,873.00R        22.2             H     2.66       34.29       59.15PK     14.85
 2,462.0        2,462.00        72.3             H     1.93       29.34       103.57      23.80
 2,462.0       4,924.00R        11.8             H     2.68       34.46       48.94AV      5.06
 2,462.0       4,924.00R        25.1             H     2.68       34.46       62.24PK     11.76




                   *Harmonics were checked through the 10th harmonic*




          APPLICANT: ITRONIX
             FCC ID: KBCIX100XA750WLBT
           REPORT #: I\ITRONIX\423AUT4\423AUT4TestReport.doc
                                                           Page 8 of 23


TIMCO ENGINEERING INC.
849 NW State Road 45
Newberry, Florida 32669
http://www.timcoengr.com
888.472.2424 F 352.472.2030 email: tei@timcoengr.com



                 Method of Measuring Radiated Spurious Emissions




                                                                           Hewlett
                                                                       Packard
                                                                           Spectrum
                                                                           Analyzer
                                                                           HP8566B


            CPU With                               ANTENNA
            TRANSMITTER
            UNDER TEST



                                                             <3.0 meters>

                                                             Tuned, Calibrated
                                                             Antenna which may
                                                             be raised from 1
                                                             to 4M above ground
            POWER SUPPLY                                     and changed
                                                             in polarization



Equipment placed 80cm above ground on a rotatable platform.



METHOD OF MEASUREMENT: The procedure used was ANSI STANDARD C63.4-1992 & the
FCC/OET Guidance on Measurements for Direct Sequence Spread Spectrum Systems –
Public Notice 54797 Dated July 12, 1995. Measurements were made at the open
field test site of TIMCO ENGINEERING INC. located at 849 N.W. State Road 45,
Newberry, FL 32669.




          APPLICANT: ITRONIX
             FCC ID: KBCIX100XA750WLBT
           REPORT #: I\ITRONIX\423AUT4\423AUT4TestReport.doc
                                                           Page 9 of 23


TIMCO ENGINEERING INC.
849 NW State Road 45
Newberry, Florida 32669
http://www.timcoengr.com
888.472.2424 F 352.472.2030 email: tei@timcoengr.com


APPLICANT:              ITRONIX

FCC ID:                 KBCIX100XA750WLBT

NAME OF TEST:           RADIATED SPURIOUS EMISSIONS INTO ADJACENT RESTRICTED BAND

REQUIREMENTS:           Emissions that fall in the restricted bands (15.205).   These
                        emissions must be less than or equal to 500 uV/m (54
                        dBuV/m).

TEST PROCEDURE:         An in band field strength measurement of the fundamental
                        Emission using the RBW and detector function required by
                        C63.4-2000 and FCC Rules. The procedure was repeated with an
                        average detector and a plot made. The calculated field
                        strength in the adjacent restricted band is presented below.


                        Average                             Average

                        CHANNEL 1                           CHANNEL 11
                        FREQUENCY: 2375.78 MHz              FREQUENCY: 2483.00 MHz
                        + 7.00 dBuV from plot               + 7.70 dBuV from plot
                        +29.20 dB   ACF                     +34.14 dB   ACF
                        + 1.85 dB   Coax Loss               + 2.65 dB   Coax Loss
                        +38.05 dBuV                         +44.49 dBuV


                        Peak                                Peak

                        CHANNEL 1                           CHANNEL 11
                        FREQUENCY: 2375.78 MHz              FREQUENCY: 2483.00 MHz
                        +20.10 dBuV from plot               +20.30 dBuV from plot
                        +29.20 dB   ACF                     +34.14 dB   ACF
                        + 1.85 dB   Coax Loss               + 2.65 dB   Coax Loss
                        +51.15 dBuV                         +57.09 dBuV




          APPLICANT: ITRONIX
             FCC ID: KBCIX100XA750WLBT
           REPORT #: I\ITRONIX\423AUT4\423AUT4TestReport.doc
                                                           Page 10 of 23


TIMCO ENGINEERING INC.
849 NW State Road 45
Newberry, Florida 32669
http://www.timcoengr.com
888.472.2424 F 352.472.2030 email: tei@timcoengr.com

                                                AVERAGE




                                                  PEAK




          APPLICANT: ITRONIX
             FCC ID: KBCIX100XA750WLBT
           REPORT #: I\ITRONIX\423AUT4\423AUT4TestReport.doc
                                                           Page 11 of 23


TIMCO ENGINEERING INC.
849 NW State Road 45
Newberry, Florida 32669
http://www.timcoengr.com
888.472.2424 F 352.472.2030 email: tei@timcoengr.com

                                                AVERAGE




                                                  PEAK




          APPLICANT: ITRONIX
             FCC ID: KBCIX100XA750WLBT
           REPORT #: I\ITRONIX\423AUT4\423AUT4TestReport.doc
                                                           Page 12 of 23


TIMCO ENGINEERING INC.
849 NW State Road 45
Newberry, Florida 32669
http://www.timcoengr.com
888.472.2424 F 352.472.2030 email: tei@timcoengr.com

APPLICANT:              ITRONIX

FCC ID:                 KBCIX100XA750WLBT

NAME OF TEST:           POWER SPECTRAL DENSITY

RULES PART NO.:         15.247(d)

REQUIREMENTS:           The peak level measured must be no greater than +8.0dBm.

DATA:                   SEE THE FOLLOWING PLOTS



                                -59 dBm     from plot
                                +35 dB      Correction Factor to 1 Hz
                                ___________
                                -24 dBm




          *3 channels were measured and the worst case is reported here*




          APPLICANT: ITRONIX
             FCC ID: KBCIX100XA750WLBT
           REPORT #: I\ITRONIX\423AUT4\423AUT4TestReport.doc
                                                           Page 13 of 23


TIMCO ENGINEERING INC.
849 NW State Road 45
Newberry, Florida 32669
http://www.timcoengr.com
888.472.2424 F 352.472.2030 email: tei@timcoengr.com




                                  POWER SPECTRAL DENSITY PLOT




          APPLICANT: ITRONIX
             FCC ID: KBCIX100XA750WLBT
           REPORT #: I\ITRONIX\423AUT4\423AUT4TestReport.doc
                                                           Page 14 of 23


TIMCO ENGINEERING INC.
849 NW State Road 45
Newberry, Florida 32669
http://www.timcoengr.com
888.472.2424 F 352.472.2030 email: tei@timcoengr.com




                                         ITRONIX
                                      P.O. BOX 179
                              SPOKANKE, WASHINGTON        99210



                               FCC ID:        KBCIX100XA750WLBT



                                         FHSS EMISSIONS
                                           (BLUETOOTH)




          APPLICANT: ITRONIX
             FCC ID: KBCIX100XA750WLBT
           REPORT #: I\ITRONIX\423AUT4\423AUT4TestReport.doc
                                                           Page 15 of 23


TIMCO ENGINEERING INC.
849 NW State Road 45
Newberry, Florida 32669
http://www.timcoengr.com
888.472.2424 F 352.472.2030 email: tei@timcoengr.com
APPLICANT:              ITRONIX

FCC ID:                 KBCIX100XA750WLBT

NAME OF TEST:           POWER LINE CONDUCTED INTERFERENCE

RULES PART NO.:         15.207

REQUIREMENTS:                                      QUASI-PEAK        AVERAGE
                             .15 – 0.5 MHz         66-56 dBuV       56-46 dBuV
                             0.5 – 5.0                56               46
                             5.0 – 30.                60               50

TEST PROCEDURE:                  ANSI STANDARD C63.4-1992.      The spectrum was scanned from .15
                                 to 30 MHz.

                                         TEST DATA – LINE 1




                                                 LINE 2




TEST RESULTS: Both lines were observed. The measurements indicate that the unit DOES
appear to meet the FCC requirements for this class of equipment.


          APPLICANT: ITRONIX
             FCC ID: KBCIX100XA750WLBT
           REPORT #: I\ITRONIX\423AUT4\423AUT4TestReport.doc
                                                           Page 16 of 23


TIMCO ENGINEERING INC.
849 NW State Road 45
Newberry, Florida 32669
http://www.timcoengr.com
888.472.2424 F 352.472.2030 email: tei@timcoengr.com


15.247(a)(1):           Number of Hopping Channels:
                        The number of hops is 79 hops at a separation of 1 MHz, the
                        requirement in the 2400 – 2483.5 MHz band is a minimum of 75
                        hops.

                                        NUMBER OF CHANNELS




                                         CARRIER FREQUENCY




          APPLICANT: ITRONIX
             FCC ID: KBCIX100XA750WLBT
           REPORT #: I\ITRONIX\423AUT4\423AUT4TestReport.doc
                                                           Page 17 of 23


TIMCO ENGINEERING INC.
849 NW State Road 45
Newberry, Florida 32669
http://www.timcoengr.com
888.472.2424 F 352.472.2030 email: tei@timcoengr.com


15.247(a)(1)(i):        Dwell Time of Hop:
                        The swell time of any hopping frequency cannot be greater
                        than 0.4 seconds in any 20 second period. The dwell time in
                        20 seconds is 2.98 mseconds.




          APPLICANT: ITRONIX
             FCC ID: KBCIX100XA750WLBT
           REPORT #: I\ITRONIX\423AUT4\423AUT4TestReport.doc
                                                           Page 18 of 23


TIMCO ENGINEERING INC.
849 NW State Road 45
Newberry, Florida 32669
http://www.timcoengr.com
888.472.2424 F 352.472.2030 email: tei@timcoengr.com


15.247(b)(3):           The antenna’s gain is a negative number.   This is described
                        in the circuit description.

15.247(a)(1)(i):        The maximum allowed 20 dB bandwidth of a hopping channel is
                        500 kHz. The 20 dB bandwidth measured was 850 kHz.




          APPLICANT: ITRONIX
             FCC ID: KBCIX100XA750WLBT
           REPORT #: I\ITRONIX\423AUT4\423AUT4TestReport.doc
                                                           Page 19 of 23


TIMCO ENGINEERING INC.
849 NW State Road 45
Newberry, Florida 32669
http://www.timcoengr.com
888.472.2424 F 352.472.2030 email: tei@timcoengr.com


NAME OF TEST:           POWER OUTPUT

RULES PART NO.:         15.247(b) 1.0 Watt or +30 dBm
                        250 mW or 24 dBm for 24 dBi Gain Ant

MEASUREMENT:            3.5 dBm

15.247(c)               Method of Measuring RF Power output:
                        The Peak power Sensor was connected in place of the antenna.




                                                                HP
                                                                PEAK
                                                                PWR MTR
                                                                8900C



              UUT Less                 PEAK POWER
              antenna                  SENSOR HP84811A


              LAPTOP
              CPU




          *3 channels were measured and the worst case is reported here*




          APPLICANT: ITRONIX
             FCC ID: KBCIX100XA750WLBT
           REPORT #: I\ITRONIX\423AUT4\423AUT4TestReport.doc
                                                           Page 20 of 23


TIMCO ENGINEERING INC.
849 NW State Road 45
Newberry, Florida 32669
http://www.timcoengr.com
888.472.2424 F 352.472.2030 email: tei@timcoengr.com

        NAME OF TEST:           SPURIOUS EMISSIONS AT ANTENNA TERMINALS

        REQUIREMENTS:           Emissions must be at least 20dB down from the
                                highest emission level within the authorized band as
                                measured with a 100 kHz RBW.

        TEST DATA:

     TF                          dB below               TF                   dB below
                     EF           carrier                         EF          carrier
    2402           2402             0.0                2441      2441           0.0
                   2251            81.1                          2288          81.1
                   2274            77.5                          4882          61.7
                   2306            76.7                          7323          63.6
                   2326            72.6
                   4804            59.4
                   7206            64.7

     TF                          dB below
                     EF           carrier
    2479           2479              0.0
                   2324             73.2
                   2556.6           71.2
                   4958             58.8
                   7437            107.7
                   4804             58.7


        15.247(c)               Method of Measuring RF Conducted Spurious Emissions


                                                                           HP
                                                                           Spectrum
                                                                           Analyzer
                                                                           8566B



            TRANSMITTER                50 OHM RESISTIVE
            UNDER TEST                 LOAD



                                                              ATTENUATOR



                *NOTE: THE SPECTRUM WAS SCANNED TO THE TENTH HARMONIC*

           APPLICANT: ITRONIX
              FCC ID: KBCIX100XA750WLBT
            REPORT #: I\ITRONIX\423AUT4\423AUT4TestReport.doc
                                                            Page 21 of 23


TIMCO ENGINEERING INC.
849 NW State Road 45
Newberry, Florida 32669
http://www.timcoengr.com
888.472.2424 F 352.472.2030 email: tei@timcoengr.com


15.247(c), 15.205 &15.209(b)            Field strength of spurious emissions:

REQUIREMENTS:
FIELD STRENGTH                  FIELD STRENGTH                S15.209
of Fundamental:                 of Harmonics                  30 - 88 MHz 40 dBuV/m @3M
902-928MHz                                                    88 -216 MHz 43.5
2.4-2.4835GHz                   127.37dBuV/m                  216 -960 MHz 46
127.38dBuV/m @3m                54 dBuV/m @3m                 ABOVE 960 MHz 54dBuV/m

EMISSIONS RADIATED OUTSIDE OF THE SPECIFIED FREQUENCY BANDS, EXCEPT FOR
HARMONICS, SHALL BE ATTENUATED BY AT LEAST 50 dB BELOW THE LEVEL OF THE
FUNDAMENTAL OR TO THE GENERAL RADIATED EMISSION LIMITS IN 15.209, WHICHEVER IS
THE LESSER ATTENUATION.

REQUIREMENTS:       Emissions that fall in the restricted bands (15.205) must
be less than 54dBuV/m otherwise the spurious and harmonics must be attenuated
by at least 20dB.

TEST DATA:

  Tuned        Emission       Meter         Ant.       Coax    Correction     Field    Margin
Frequency     Frequency      Reading      Polarity     Loss      Factor     Strength     dB
   MHz            MHz          dBuV                     dB         dB        dBuV/m
 2,402.0       2,402.00       59.8             V       1.86      29.26       90.92     36.45
 2,402.0      4,804.00R       10.3             V       2.64      33.97      46.91AV     7.09
 2,441.0      2,322.00R         6.3            V       1.83      29.15      37.28AV    16.72
 2,441.0      2,340.00R         6.3            V       1.84      29.18      37.32AV    16.68
 2,441.0       2,441.00       63.0             V       1.88      29.32       94.20     33.17
 2,441.0       2,543.00         6.8            V       1.92      29.49       38.21     15.79
 2,441.0       2,603.00       10.2             V       1.94      29.63       41.77     12.23
 2,441.0      2,724.60R       14.2             V       1.99      29.89      46.08AV     7.92
 2,441.0      2,724.60R       27.0             V       1.99      29.89      58.88PK    15.12
 2,441.0      2,730.00R       13.5             V       1.99      29.91      45.40AV     8.60
 2,441.0      2,730.00R       28.5             V       1.99      29.91      60.40PK    13.60
 2,441.0      2,735.00R       11.9             V       1.99      29.92      43.81AV    10.19
 2,441.0      2,735.00R       24.8             V       1.99      29.92      56.71PK    17.29
 2,441.0      4,882.00R       11.8             V       2.66      34.22      48.68AV     5.32
 2,479.0       2,479.00       59.3             V       1.89      29.37       90.56     36.81
 2,479.0      2,725.00R       11.3             V       1.99      29.90      43.19AV    10.81
 2,479.0      2,725.00R       25.5             V       1.99      29.90      57.39PK    16.61
 2,479.0      2,729.60R       13.2             V       1.99      29.91      45.10AV     8.90
 2,479.0      2,729.60R       26.9             V       1.99      29.91      58.80PK    15.20
 2,479.0      2,734.70R       11.3             V       1.99      29.92      43.21AV    10.79
 2,479.0      2,734.70R       17.8             V       1.99      29.92      49.71PK    24.29
 2,479.0      4,958.00R       12.5             V       2.69      34.47      49.66AV     4.34
 2,543.0      2,340.00R         6.8            V       1.84      29.18      37.82AV    16.18


                   *Harmonics were checked through the 10th harmonic*


          APPLICANT: ITRONIX
             FCC ID: KBCIX100XA750WLBT
           REPORT #: I\ITRONIX\423AUT4\423AUT4TestReport.doc
                                                           Page 22 of 23


TIMCO ENGINEERING INC.
849 NW State Road 45
Newberry, Florida 32669
http://www.timcoengr.com
888.472.2424 F 352.472.2030 email: tei@timcoengr.com



                 Method of Measuring Radiated Spurious Emissions




                                                                           Hewlett
                                                                       Packard
                                                                           Spectrum
                                                                           Analyzer
                                                                           HP8566B


            CPU With                               ANTENNA
            TRANSMITTER
            UNDER TEST



                                                             <3.0 meters>

                                                             Tuned, Calibrated
                                                             Antenna which may
                                                             be raised from 1
                                                             to 4M above ground
            POWER SUPPLY                                     and changed
                                                             in polarization



Equipment placed 80cm above ground on a rotatable platform.


METHOD OF MEASUREMENT: The procedure used was ANSI STANDARD C63.4-1992 & the
FCC/OET Guidance on Measurements for Direct Sequence Spread Spectrum Systems –
Public Notice 54797 Dated July 12, 1995. Measurements were made at the open
field test site of TIMCO ENGINEERING INC. located at 849 N.W. State Road 45,
Newberry, FL 32669.




          APPLICANT: ITRONIX
             FCC ID: KBCIX100XA750WLBT
           REPORT #: I\ITRONIX\423AUT4\423AUT4TestReport.doc
                                                           Page 23 of 23



Document Created: 2004-05-26 15:42:55
Document Modified: 2004-05-26 15:42:55

© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC