RF exposure Info 6 of 6

FCC ID: KBCIX-512AN

RF Exposure Info

Download: PDF
FCCID_1517675

Calibration Laboratory of witn SA Schweizerischer Kalibrierdienst Schmid & Partner i’fi//fi Service suisse d‘étalonnage Engineering AG Peroyrg Servizio svizzero di taratura Zeughausstrasse 43, 8004 Zurich, Switzerland 4/7\\\\\‘\~‘ Swiss Calibration Service thilubs Accredited by the Swiss Accreditation Service (SAS) Accreditation No.: SCS 108 The Swiss Accreditation Service is one of the signatories to the EA Multilateral Agreement for the recognition of calibration certificates Client T. Calibration procedure(s) Calibration date: This calibration certificate documents the traceability to national standards, which realize the physical units of measurements (S1). The measurements and the uncertainties with confidence probability are given on the following pages and are part of the certificate. All calibrations have been conducted in the closed laboratory facility: environment temperature (22 + 3)°C and humnidity <70%. Calibration Equipment used (M&TE critical for calibration) Primary Standards ID # Cal Date (Certificate No.) Scheduled Calibration Power meter EPM—442A GB37480704 06—Oct—10 (No. 217—01266) Oct—11 Power sensor HP 8481A US37202783 06—Oct—10 (No. 217—01266) Oct—11 Reference 20 dB Attenuator SN: 5086 (209) 29—Mar—11 (No. 217—01368) Apr—12 Type—N mismatch combination SN: 5047.2 / 06327 29—Mar—11 (No. 217—01871) Apr—12 Reference Probe EX3DV4 SN: 3503 04—Mar—11 (No. EX3—3503_Mar11) Mar—12 DAE4 SN: 601 8—Jun—11 (No. DAE4—601_Jun11) Jun—12 Secondary Standards ID # Check Date (in house) Scheduled Check Power sensor HP 8481A MY41092317 18—0ct—02 (in house check Oct—09) In house check: Oct—11 RF generator R&S SMT—06 100005 4—Aug—99 (in house check Oct—08) In house check: Oct—11 Network Analyzer HP 8753E US37390585 84206 18—Oct—01 (in house check Oct—10) In house check: Oct—11 Name Function Signature Calibrated by: Approved by: Issued: June 21, 2011 This calibration certificate shall not be reproduced except in full without written approvalof the laboratory. Certificate No: D5GHz—1040_Jun11 Page 1 of 13

& & w91 Mpe Calibration Laboratory of wl J. Schweizerischer Kalibrierdienst . s 2 S Schmid & Partner ififi}é c Service sulsse d‘étalonnage Engineering AG L ny Servizio svizzero di taratura Zeughausstrasse 43, 8004 Zurich, Switzerland ""f/fi\\‘\\ S Swiss Calibration Service thduts® Accredited by the Swiss Accreditation Service (SAS) Accreditation No.: SCS 108 The Swiss Accreditation Service is one of the signatories to the EA Multilateral Agreement for the recognition of calibration certificates Glossary: TSL tissue simulating liquid ConvF sensitivity in TSL / NORM x,y,z N/A not applicable or not measured Calibration is Performed According to the Following Standards: a) IEEE Std 1528—2003, "IEEE Recommended Practice for Determining the Peak Spatial— Averaged Specific Absorption Rate (SAR) in the Human Head from Wireless Communications Devices: Measurement Techniques", December 2003 b) IEC 62209—1, "Procedure to measure the Specific Absorption Rate (SAR) for hand—held devices used in close proximity to the ear (frequency range of 300 MHz to 3 GHz)", February 2005 c) Federal Communications Commission Office of Engineering & Technology (FCC OET}, "Evaluating Compliance with FCC Guidelines for Human Exposure to Radiofrequency Electromagnetic Fields; Additional Information for Evaluating Compliance of Mobile and Portable Devices with FCC Limits for Human Exposure to Radiofrequency Emissions", Supplement C (Edition 01—01) to Bulletin 65 Additional Documentation: d) DASY4/5 System Handbook Methods Applied and Interpretation of Parameters: e Measurement Conditions: Further details are available from the Validation Report at the end of the certificate. All figures stated in the certificate are valid at the frequency indicated. e Antenna Parameters with TSL: The dipole is mounted with the spacer to position its feed point exactly below the center marking of the flat phantom section, with the arms oriented parallel to the body axis. * Feed Point Impedance and Return Loss: These parameters are measured with the dipole positioned under the liquid filled phantom. The impedance stated is transformed from the measurement at the SMA connector to the feed point. The Return Loss ensures low reflected power. No uncertainty required. * Electrical Delay: One—way delay between the SMA connector and the antenna feed point. No uncertainty required. e SAR measured: SAR measured at the stated antenna input power. e SAR normalized: SAR as measured, normalized to an input power of 1 W at the antenna connector. & SAR for nominal TSL parameters: The measured TSL parameters are used to calculate the nominal SAR result. Certificate No: DS5GHz—1040_Jun11 Page 2 of 13

Measurement Conditions DASY system configuration, as far as not given on page 1. DASY Version DASYS V52.6.2 Extrapolation Advanced Extrapolation Phantom Modular Flat Phantom V5.0 Distance Dipole Center — TSL 10 mm with Spacer Zoom Scan Resolution dx, dy = 4.0 mm, dz =1.4 mm 5200 MHz & 1 MHz Frequency 5500 MHz + 1 MHz 5800 MHz + 1 MHz Head TSL parameters at 5200 MHz The following parameters and calculations were applied. Temperature Permittivity Conductivity Nominal Head TSL parameters 22.0 °C 36.0 4.66 mho/m Measured Head TSL parameters (22.0 + 0.2) °C 35.8 + 6 % 4.50 mho/m £ 6 % Head TSL temperature change during test <0.5 °C SAR result with Head TSL at 5200 MHz SAR averaged over 1 cm° (1 g) of Head TSL Condition SAR measured 100 mW input power 8. 13 mW /g SAR for nominal Head TSL parameters normalized to 1W 81.2 mW /g + 17.0 % (k=2) SAR averaged over 10 em* (10 g) of Head TSL condition SAR measured 100 mW input power 2.32 mW /g SAR for nominal Head TSL parameters normalized to 1W 23.1 mW /g 2 16.5 %(k=2) Head TSL parameters at 5500 MHz The following parameters and calculations were applied. Temperature Permittivity Conductivity Nominal Head TSL parameters 22.0 °C 35.6 4.96 mho/m Measured Head TSL parameters (22.0 £ 0.2) °C 35.2 +6 % 4.82 mho/m + 6 % Head TSL temperature change during test <0.5 °C SAR result with Head TSL at 5500 MHz SAR averaged over 1 cm‘ (1 g) of Head TSL Condition SAR measured 100 mW input power 8.59 mWw /g SAR for nominal Head TSL parameters normalized to 1W 85.6 mW / g £ 17.0 % (k=2) SAR averaged over 10 cm‘ (10 g) of Head TSL condition SAR measured 100 mW input power 2.44 mW / g SAR for nominal Head TSL parameters normalized to 1W 24.3 mW / g @ 16.5 % (k=2) Certificate No: D5GHz—1040_Jun11 Page 3 of 13

Head TSL parameters at 5800 MHz The following parameters and calculations were applied. Temperature Permittivity Conductivity Nominal Head TSL parameters 22.0 °C 35.3 5.27 mho/m Measured Head TSL parameters (22.0 + 0.2) °C 34.8 16 % 5.08 mho/m x 6 % Head TSL temperature change during test <0.5 °C SAR result with Head TSL at 5800 MHz SAR averaged over 1 cm* (1 g) of Head TSL Condition SAR measured 100 mW input power 7.93 mW /g SAR for nominal Head TSL parameters normalized to 1W 78.9 mW / g * 17.0 %(k=2) SAR averaged over 10 cm‘ (10 g) of Head TSL condition SAR measured 100 mW input power 2.25 mW /g SAR for nominal Head TSL parameters normalized to 1W 22.4 mW / g # 16.5 %(k=2) Certificate No: D5GHz—1040_Jun11 Page 4 of 13

Body TSL parameters at 5200 MHz The following parameters and calculations were applied. Temperature Permittivity Conductivity Nominal Body TSL parameters 22.0 °C 49.0 5.30 mho/m Measured Body TSL parameters (22.0 x 0.2) °C 49.0 +6 % 5.41 mho/m + 6 % Body TSL temperature change during test <0.5 °C SAR result with Body TSL at 5200 MHz SAR averaged over 1 cm‘ (1 g) of Body TSL Condition SAR measured 100 mW input power 7.60 mWw /g SAR for nominal Body TSL parameters normalized to 1W 76.0 mW / g # 18. 1 % (k=2) SAR averaged over 10 em‘ (10 g) of Body TSL condition SAR measured 100 mW input power 2.13 mW /g SAR for nominal Body TSL parameters normalized to 1W 21.3 mW / g # 17.6 % (Kk=2) Body TSL parameters at 5500 MHz The following parameters and calculations were applied. Temperature Permittivity Conductivity Nominal Body TSL parameters 22.0 °C 48.6 5.65 mho/m Measured Body TSL parameters (22.0 + 0.2) °C 48.3 4 6 % 5.86 mho/m + 6 % Body TSL temperature change during test <0.5 °C SAR result with Body TSL at 5500 MHz SAR averaged over 1 cm‘ (1 g) of Body TSL Condition SAR measured 100 mW input power 8.18 mW / g SAR for nominal Body TSL parameters normalized to 1W 81.7 mW / g x 18.1 % (k=2) SAR averaged over 10 cm‘ (10 g) of Body TSL condition SAR measured 100 mW input power 2.27 mW /g SAR for nominal Body TSL parameters normalized to 1W 22.7 mW / g 17.6 % (K=2) Certificate No: D5GHz—1040_Jun11 Page 5 of 13

Body TSL parameters at 5800 MHz The following parameters and calculations were applied. Temperature Permittivity Conductivity Nominal Body TSL parameters 22.0 °C 48.2 6.00 mho/m Measured Body TSL parameters (22.0 x 0.2) °C 47.8 £6 % 6.21 mho/m # 6 % Body TSL temperature change during test <0.5°C SAR result with Body TSL at 5800 MHz SAR averaged over 1 cm‘ (1 g) of Body TSL Condition SAR measured 100 mW input power 7.55 mW / g SAR for nominal Body TSL parameters normalized to 1W 75.4 mW / g £ 18.1 % (k=2) SAR averaged over 10 cm‘ (10 g) of Body TSL condition SAR measured 100 mW input power 2.10 mWw /g SAR for nominal Body TSL parameters normalized to 1W 21.0 mW / g x 17.6 %(k=2) Certificate No: D5GHz—1040_Jun+1 Page 6 of 13

Appendix Antenna Parameters with Head TSL at 5200 MHz impedance, transformed to feed point 49.8 Q — 6.9 jQ Return Loss —23.2 dB Antenna Parameters with Head TSL at 5500 MHz Impedance, transformed to feed point §1.9 Q — 4.3 jQ Return Loss — 26.8 dB Antenna Parameters with Head TSL at 5800 MHz Impedance, transformed to feed point 54.6 Q — 1.6 jQ Return Loss —26.6 dB Antenna Parameters with Body TSL at 5200 MHz Impedance, transformed to feed point 50.0 Q — 5.6 jQ Returmn Loss —25.0 dB Antenna Parameters with Body TSL at 5500 MHz Impedance, transformed to feed point 52.1 Q —2.5 |Q Return Loss —30.1 dB Antenna Parameters with Body TSL at 5800 MHz Impedance, transformed to feed point 56.0 Q + 0.5 jQ Return Loss — 24.9 dB General Antenna Parameters and Design Electrical Delay (one direction) 1.203 ns After long term use with 100W radiated power, only a slight warming of the dipole near the feedpoint can be measured. The dipole is made of standard semirigid coaxial cable. The center conductor of the feeding line is directly connected to the second arm of the dipole. The antenna is therefore short—circuited for DC—signals. No excessive force must be applied to the dipole arms, because they might bend or the soldered connections near the feedpoint may be damaged. Additional EUT Data Manufactured by SPEAG Manufactured on December 30, 2005 Certificate No: D5GHz—1040_Jun11 Page 7 of 13

DASY5 Validation Report for Head TSL Date: 20.06.2011 Test Laboratory: SPEAG, Zurich, Switzerland DUT: Dipole 5GHz; Type: D5GHz; Serial: DSGHzV2 — SN: 1040 Communication System: CW; Frequency: 5200 MHz, Frequency: 5500 MHz, Frequency: 5800 MHz Medium: HSL 502 A Medium parameters used: f = 5200 MHz; 0 = 4.5 mho/m; & = 35.8; p = 1000 kg/m3 , Medium parameters used: f = 5500 MHz; 0 = 4.82 mho/m; &, = 35.2; p = 1000 kg/m" , Medium parameters used: f = 5800 MHz; 5 = 5.08 mho/m; &, = 34.8; p = 1000 kg/m‘ Phantom section: Flat Section Measurement Standard: DASY3 (IEEE/IEC/ANSI €63.19—2007) DASY52 Configuration: *« Probe: EX3DV4 — SN3503; ConvF(5.41, 5.41, 5.41), ConvP(4.91, 4.91, 4.91), ConvF(4.81, 4.81, 4.81); Calibrated: 04.03.201 1 * Sensor—Surface: 1.4mm (Mechanical Surface Detection) e Electronics: DAE4 Sn601; Calibrated: 08.06.2011 + Phantom: Flat Phantom 5.0 (front); Type: QDOOOP50AA; Serial: 1001 «_ DASY532 52.6.2(482); SEMCAD X 14.4.5(3634) Dipole Calibration for Head Tissue/Pin=100mW, dist=10mm, £=5200 MHz/Zoom Scan, dist=1.4mm (8x8x7)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=1.4mm Reference Value = 65.544 V/m; Power Drift = 0.07 dB Peak SAR (extrapolated) = 30.178 W/kg SAR(1 g) = 8.13 mW/g; SAR(10 g) = 2.32 mW/g Maximum value of SAR (measured) = 18.566 mW/g Dipole Calibration for Head Tissue/Pin=100mwW, dist=10mm, £=5500 MHz/Zoom Scan, dist=1.4mm (8x8x7)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=1.4mm Reference Value = 65.669 V/m; Power Drift = 0.04 dB Peak SAR (extrapolated) = 34.025 W/kg SAR(1 g) = 8.59 mW/g; SAR(10 g) = 2.44 mW/ig Maximum value of SAR (measured) = 20.159 mW/g Dipole Calibration for Head Tissue/Pin=100mW, dist=10mm, £=5800 MHz/Zoom Scan, dist=1.4mm (8x8x7)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=1.4mm Reference Value = 61.830 V/m; Power Drift = 0.06 dB Peak SAR (extrapolated) = 32.874 W/kg SAR(I g) = 7.93 mW/g; SAR(10 g) = 2.25 mW/g Maximum value of SAR (measured) = 18.884 mW/g Certificate No: D5GHz—1040_Jun11 Page 8 of 13

~18.00 —27.00 ~36.00 ~45.00 0 dB = 18.880mW/g Certificate No: D5GHz—1040_Jun11 Page 9 of 13

Impedance Measurement Plot for Head TSL 20 Jun 2011 @9:11:58 CBI s11 1 U FS 1: 49.848 a —6.8945 8 4.4398 pF 5 200.000 800 MHz # CH1 Mark ers Del 2s 51.904 a ~4.2578 a Cor 5.590000 GHz 9: 54.6%5 9 ~1.9986 a 5.90000 8Hz fAvg 16 H1d CH2 CH2 Markers 21~26.793 dB Cor 5.50000 GHz 2:—26.641 dB 5.90000 GHz fv 169 H1d START 5 008.000 000 MHz STOP 6 000.000 000 MHz Certificate No: DSGHz—1040_Jun11 Page 10 of 13

DASY5 Validation Report for Body TSL Date: 21.06.2011 Test Laboratory: SPEAG, Zurich, Switzerland DUT: Dipole 5GHz; Type: D5SGHz; Serial: DSGHzV2 — SN: 1040 Communication System: CW; Frequency: 5200 MHz, Frequency: 5500 MHz, Frequency: 5800 MHz Medium: MSL 501 Medium parameters used: f = 5200 MHz; 0 = 5.41 mho/m; &, = 49; p = 1000 kg/m3 , Medium parameters used: f = 5500 MHz; o = 5.86 mho/m; &, = 48.3; p = 1000 kg/m3 , Medium parameters used: f = 5800 MHz; 0 = 6.21 mho/m; £, = 47.8; p = 1000 kg/m3 Phantom section: Flat Section Measurement Standard: DASY5 (IEEE/IEC/ANSI €63.19—2007) DASY52 Configuration: « Probe: EX3DV4 — SN3503; ConvF(4.91, 4.91, 4.91), ConvF(4.43, 4.43, 4.43), ConvF(4.38, 4.38, 4.38); Calibrated: 04.03.201 1 « Sensor—Surface: 1.4mm (Mechanical Surface Detection) *« Electronics: DAE4 Sn601; Calibrated: 08.06.2011 & Phantom: Flat Phantom 5.0 (back); Type: QDOOOPS5OAA; Serial: 1002 «_ DASY532 52.6.2(482); SEMCAD X 14.4.5(3634) Dipole Calibration for Body Tissue/Pin=100mW, dist=10mm, £=5200 MHz/Zoom Scan, dist=1.4mm (8x8x7)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=1.4mm Reference Value = 58.999 V/m; Power Drift = —0.04 dB Peak SAR (extrapolated) = 29.005 W/kg SAR(1 g) = 7.6 mW/g; SAR(10 g) = 2.13 mW/g Maximum value of SAR (measured) = 17.369 mW/g Dipole Calibration for Body Tissue/Pin=100mW, dist=10mm, £=5500 MHz/Zoom Scan, dist=1.4mm (8x8x7)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=1.4mm Reference Value = 59.120 V/m; Power Drift = —0.04 dB Peak SAR (extrapolated) = 33.982 W/kg SAR(I g) = 8.18 mW/g; SAR(10 g) = 2.27 mW/ig Maximum value of SAR (measured) = 19.380 mW/g Dipole Calibration for Body Tissue/Pin=100mW, dist=10mm, £=5800 MHz/Zoom Scan, dist=1.4mm (8x8x7)/Cube 0; Measurement grid: dx=4mm, dy=4mm, dz=1.4mm Reference Value = 55.208 V/m; Power Drift = —0.05 dB Peak SAR (extrapolated) = 33.965 W/kg SAR(I g) = 7.55 mW/g; SAR(10 g) = 2.1 mW/g Maximum value of SAR (measured) = 18.403 mW/g Certificate No: D5GHz—1040_Jun11 Page 11 of 13

—20.00 —30.00 —40.00 —50.00 0 dB = 18.400mW/g Certificate No: D5GHz—1040_Jun11 Page 12 of 13

Impedance Measurement Plot for Body TSL 21 Jun 2011 ©8:57:17 si1 i uo rs {149.951 6| —5.6484 4 5.4186 pF 5 200.000 ona mHz / ~_ x toT > m L2 CH1 Markers Be 1 m 52.052 a ~2,4570 a Cor 5.50000 oz a ax848 :£ 5.90000 GHz Av 16° wia cH2 CH2 Markers :—30.056 dB Cor $.50000 SHz 3:—24.988 dB 5.800000 GHz Ay 16° H1d START 5 600.000 gon MHz STOP 6 6ag.000 000 MHz Certificate No: D5GHAz—1040_Jun11 Page 18 of 18


Document Created: 2019-11-12 12:47:20
Document Modified: 2019-11-12 12:47:20
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC