SAR Report part 3

FCC ID: KBCIX-4965AGN

RF Exposure Info

Download: PDF
FCCID_931524

Date(s) of Evaluation Test Report Serial No. Test Report Revision No. November 02, 06, 2007 102407KBC-T866-S15WB Rev. 1.0 (Initial Release) Test Report Issue Date Description of Test(s) RF Exposure Category March 20, 2008 Specific Absorption Rate General Population Certificate No. 2470.01 APPENDIX G - PROBE CALIBRATION Company: General Dynamics Itronix Corporation FCC ID: KBCIX-4965AGN IC: 1943A-4965AGN Model(s): IX350 DUT Type: Tablet PC with 802.11a/b/g/n WLAN & Co-located Bluetooth 2008 Celltech Labs Inc. This document is not to be reproduced in whole or in part without the prior written permission of Celltech Labs Inc. Page 71 of 72

Calibration Laboratory of vipir u7a & Schweizerischer Kalibrierdienst Schmid & Partner Service suisse d‘étaionnage Engineering AG Servizio svizzero di taratura Zeughausstrasse 43, 8004 Zurich, Switzerland Za ""lrl,.lu\“\ Swiss Calibration Service Accredited by the Swiss Federal Office of Metrology and Accreditation Accreditation No.: SCS 108 The Swiss Accreditation Service is one of the signatories to the EA Multilateral Agreement for the recognition of calibration certificates Client Object Calibration procedure(s) Calibration date: Condition of the calibrated item This calibration certificate documents the traceability to national standards, which realize the physical units of measurements (S1). The measurements and the uncertainties with confidence probability are given on the following pages and are part of the certificate. All calibrations have been conducted in the closed laboratory facility: environment temperature (22 + 3)°C and humidity < 70%. Calibration Equipment used (M&TE critical for calibration) Primary Standards 1D # Cal Date (Calibrated by, Certificate No.) Scheduled Calibration Power meter E4419B GB41293874 5—Apr—06 (METAS, No. 251—00557) Apr—07 Power sensor E4412A MY41495277 5—Apr—06 (METAS, No. 251—00557) Apr—07 Power sensor E4412A MY41498087 5—Apr—06 (METAS, No. 251—00557) Apr—07 Reference 3 dB Attenuator SN: S5054 (3c) 10—Aug—06 (METAS, No. 217—00592) Aug—07 Reference 20 dB Attenuator SN: $5086 (20b) 4—Apr—06 (METAS, No. 251—00558) Apr—07 Reference 30 dB Attenuator SN: $5129 (30b) 10—Aug—06 (METAS, No. 217—00593) Aug—07 Reference Probe ES3DV2 SN: 3013 4—Jan—07 (SPEAG, No. ES3—3013_Jan07) Jan—08 DAE4 SN: 654 21—Jun—06 (SPEAG, No. DAE4—654_JunO6) Jun—07 Secondary Standards ID # Check Date (in house) Scheduled Check RF generator HP 8648C US3642U01700 4—Aug—99 (SPEAG, in house check Nov—05) In house check: Nov—07 Network Analyzer HP 8753E US37390585 18—Oct—01 (SPEAG, in house check Oct—06) In house check: Oct—07 Name Signature Calibrated by: Approved by: :NielsKuster Issued: January 24, 2007 This calibration certificate shall not be reproduced except in full without written approval of the laboratory. Certificate No: EX3—3600_JanO7 Page 1 of 9

Calibration Laboratory of aNll/ Schwelizerischer Kalibrierdienst Schmid & Partner Service suisse d‘étalonnage Engineering AG y Servizio svizzero di taratura Iuf Ty" N\ x Zeughausstrasse 43, 8004 Zurich, Switzerland + 8 Swiss Calibration Service l,'llulu\\‘\\ Accredited by the Swiss Federal Office of Metrology and Accreditation Accreditation No.: SCS 108 The Swiss Accreditation Service is one of the signatories to the EA Multilateral Agreement for the recognition of calibration certificates Glossary: TSL tissue simulating liquid NORMx,.y,z sensitivity in free space ConF sensitivity in TSL / NORMx,y,z DCP diode compression point Polarization 4 o rotation around probe axis Polarization 8 8 rotation around an axis that is in the plane normal to probe axis (at measurement center), i.e., 8 = 0 is normal to probe axis Calibration is Performed According to the Following Standards: a) IEEE Std 1528—2003, "IEEE Recommended Practice for Determining the Peak Spatial— Averaged Specific Absorption Rate (SAR) in the Human Head from Wireless Communications Devices: Measurement Techniques", December 2003 b) CENELEC EN 50361, "Basic standard for the measurement of Specific Absorption Rate related to human exposure to electromagnetic fields from mobile phones (300 MHz — 3 GHz), July 2001 Methods Applied and Interpretation of Parameters: NORMx,y,z: Assessed for E—field polarization 8 = 0 (f < 900 MHz in TEM—cell; f > 1800 MHz: R22 waveguide). NORMx,y,z are only intermediate values, i.e., the uncertainties of NORMx,y,z does not effect the E*—field uncertainty inside TSL (see below ConvF). NORM(P)x,y,z = NORMx,y,z * frequency_response (see Frequency Response Chart). This linearization is implemented in DASY4 software versions later than 4.2. The uncertainty of the frequency response is included in the stated uncertainty of ConvF. DCPx,y,z: DCP are numerical linearization parameters assessed based on the data of power sweep (no uncertainty required). DCP does not depend on frequency nor media. ConvF and Boundary Effect Parameters: Assessed in flat phantom using E—field (or Temperature Transfer Standard for f < 800 MHz) and inside waveguide using analytical field distributions based on power measurements for f > 800 MHz. The same setups are used for assessment of the parameters applied for boundary compensation (alpha, depth) of which typical uncertainty values are given. These parameters are used in DASY4 software to improve probe accuracy close to the boundary. The sensitivity in TSL corresponds to NORMx,y,z * ConvF whereby the uncertainty corresponds to that given for ConvF. A frequency dependent ConvF is used in DASY version 4.4 and higher which allows extending the validity from + 50 MHz to + 100 MHz. Spherical isotropy (3D deviation from isotropy): in a field of low gradients realized using a flat phantom exposed by a patch antenna. Sensor Offset: The sensor offset corresponds to the offset of virtual measurement center from the probe tip (on probe axis). No tolerance required. Certificate No: EX3—3600_JanO7 Page 2 of 9

EX3DV4 SN:3600 January 24, 2007 Probe EX3DV4 SN:3600 Manufactured: January 10, 2007 Calibrated: January 24, 2007 Calibrated for DASY Systems (Note: non—compatible with DASY2 system!) Certificate No: EX3—3600_JanO7 Page 3 of 9

EX3DV4 SN:3600 January 24, 2007 DASY — Parameters of Probe: EX3DV4 SN:3600 Sensitivity in Free SpaceA Diode Compression® NormX 0.460 £10.1% uV/(V/im) DCP X 90 mV NormYy 0.470 £101% uV/(V/im) DCP Y 88 mV NormZ 0.380 £10.1% uV/(V/im) DCP Z 89 mV Sensitivity in Tissue Simulating Liquid (Conversion Factors) Please see Page 8. Boundary Effect TSL 1810 MHz Typical SAR gradient: 10 % per mm Sensor Center to Phantom Surface Distance 2.0 mm 3.0 mm SARpe [%)] Without Correction Algorithm 4.5 3.5 SARp, [%] With Correction Algorithm 0.2 0.4 TSL 5800 MHz Typical SAR gradient: 30 % per mm Sensor Center to Phantom Surface Distance . 2.0 mm 3.0 mm SARp, [%] Without Correction Algorithm 3.5 2.0 SARpe [%] With Correction Algorithm 0.1 0.3 Sensor Offset Probe Tip to Sensor Center 1.0 mm The reported uncertainty of measurement is stated as the standard uncertainty of measurement muiltiplied by the coverage factor k=2, which for a normal distribution corresponds to a coverage probability of approximately 95%. * The uncertainties of NormX,Y,Z do not affect the E*—field uncertainty inside TSL (see Page 8). Numerical linearization parameter: uncertainty not required. Certificate No: EX3—3600_JanO7 Page 4 of 9

EX3DV4 SN:3600 January 24, 2007 Frequency Response of E—Field (TEM—Cell:ifi110 EXX, Waveguide: R22) 1.5 1.4 1.3 Frequency response (normalized) _2 N _2 s 1.0 0.9 0.8 o N 0.6 0.5 0 500 1000 1500 2000 2500 3000 f [MHz] | —@—TEM —@— R22 J Uncertainty of Frequency Response of E—field: £ 6.3% (k=2) Certificate No: EX3—3600_JanO7? Page 5 of 9

EX3DV4 SN:3600 January 24, 2007 Receiving Pattern (¢), 9 = 0° f= 600 MHz, TEM ifi110EXX | —@— 100 MHz Error [dB] ——600 MHz | —@— 1800 MHz | —a&— 2500 MHz | Uncertainty of Axial Isotropy Assessment: £ 0.5% (k=2) Certificate No: EX3—3600_JanO7 Page 6 of 9

EX3DV4 SN:3600 January 24, 2007 Dynamic Range f(SARpeaq) (Waveguide R22, f = 1800 MHz) 1.E+7 1.E+6 1.E+5 Input Signal [pV] 1.E+4 1.E+3 1.E+2 1.E+1 1.E+0 0.0001 0.001 0.01 0.1 1 10 100 SAR [mW/icm*] —@— not compensated —@— compensated Error [dB] J bst o 6 7* & t 0.001 0.01 0.1 1 10 100 SAR [mW/cm‘*] Uncertainty of Linearity Assessment: £ 0.6% (k=2) Certificate No: EX3—3600_JanO7 Page 7 of 9

EX3DV4 SN:3600 January 24, 2007 Conversion Factor Assessment f= 1810 MHz, WGLS R22 (head) f= 5800 MHz, WGLS R58 (head) ‘ 30 —i— — es 4 800 n EL feieieaiges _ ‘ 700 | | | 600 | SAR[mW/cm‘*] / W SAR[mW/cm*] / W | 500 | 400 | | 300 | | 200 | | | 100 | ‘ 0 0 10 20 30 | y ns c z[mm] ‘ oooz , | ‘ —@— Analytical —0—Measurements | @— Analytical 0— Measurements | f [MHz] Validity [MHz]® TSL Permittivity Conductivity Alpha Depth ConvF Uncertainty 1810 £50/£100 Head 40.0£5% 1.40%5% 0.20 1.01 7.02 £11.0% (k=2) 1950 £50/£100 Head 40.0£5% 1.40+5% 0.26 1.05 6.59 £11.0% (k=2) 2450 £50/£100 Head 39.2£5% 1.80£5% 0.44 1.00 6.37 £11.8% (k=2) 5800 £50/+ 100 Head 35.3 15% 5.27 + 5% 0.37 1.65 4.34 £13.1% (k=2) 1810 £50/£100 Body 53.315% 1.52+5% 0.24 1.06 6.85 £11.0% (k=2) 1950 £50/£100 Body 53.315% 1.52+5% 0.16 1.35 6.54 £11.0% (k=2) 2450 £50/£100 Body 52.715% 1.95+5% 0.42 1.00 6.31 £11.8% (k=2) 5200 £50/£100 Body 49.0£5% 5.30 £5% 0.35 1.70 4.10 £13.1% (k=2) 5500 £50/+100 Body 48.6£5% 5.65 £5% 0.32 1.70 3.95 £13.1% (k=2) 5800 £50/+100 Body 48.2+5% 6.00 £5% 0.33 1.70 4.14 £13.1% (k=2) © The validity of £ 100 MHz only applies for DASY v4.4 and higher (see Page 2). The uncertainty is the RSS of the ConvF uncertainty at calibration frequency and the uncertainty for the indicated frequency band. Certificate No: EX3—3600_Jan07 Page 8 of 9

EX3DV4 SN:3600 January 24, 2007 Deviation from Isotropy in HSL Error (¢, 9), f = 900 MHz Error [dB] Ca _ _ |i€—1.00——0.80 ©—0.80——0.60 ©—0.60——0.40 ©—0.40——0.20 ©—0.20—0.00 |©0.00—0.20 ©0.20—0.40 ©0.40—0.60 ©0.60—0.80 IO.80-1.00} Uncertainty of Spherical Isotropy Assessment: £ 2.6% (k=2) Certificate No: EX3—3600_JanO7 Page 9 of 9


Document Created: 2008-03-20 16:19:16
Document Modified: 2008-03-20 16:19:16
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC