Test Report for DFS

FCC ID: KBCIX-4965AGN

Test Report

Download: PDF
FCCID_795462

FCC CFR47 PART 15 SUBPART E DFS TEST REPORT FOR 802.11 A/B/G/N MINI-PCI EXPRESS NETWORK ADAPTER MODEL NUMBER: 4965AGN FCC ID: PD94965AGN REPORT NUMBER: 06U10551-1 ISSUE DATE: OCTOBER 17, 2006 Prepared for INTEL 2111 N. E. 25TH AVE HILLSBORO, OR 97124 Prepared by COMPLIANCE CERTIFICATION SERVICES 561F MONTEREY ROAD MORGAN HILL, CA 95037, USA TEL: (408) 463-0885 FAX: (408) 463-0888

REPORT NO: 06U10551-1 DATE: OCTOBER 17, 2006 EUT: 802.11 a/b/g/n Mini-PCI Express Network Adapter FCC ID: PD94965AGN Revision History Issue Rev. Date Revisions Revised By -- 10/17/06 Initial Issue AI Page 2 of 25 COMPLIANCE CERTIFICATION SERVICES DOCUMENT NO: CCSUP4031A 561F MONTEREY ROAD, MORGAN HILL, CA 95037 USA TEL: (408) 463-0885 FAX: (408) 463-0888 This report shall not be reproduced except in full, without the written approval of CCS.

REPORT NO: 06U10551-1 DATE: OCTOBER 17, 2006 EUT: 802.11 a/b/g/n Mini-PCI Express Network Adapter FCC ID: PD94965AGN TABLE OF CONTENTS 1. ATTESTATION OF TEST RESULTS............................................................................................. 4 2. TEST METHODOLOGY .................................................................................................................. 5 3. FACILITIES AND ACCREDITATION .......................................................................................... 5 4. CALIBRATION AND UNCERTAINTY.......................................................................................... 5 4.1. MEASURING INSTRUMENT CALIBRATION ............................................................................. 5 5. EQUIPMENT UNDER TEST............................................................................................................ 6 5.1. DESCRIPTION OF EUT .............................................................................................................. 6 5.2. SOFTWARE AND FIRMWARE .................................................................................................... 6 6. TEST AND MEASUREMENT EQUIPMENT ................................................................................ 7 7. LIMITS AND RESULTS ................................................................................................................... 8 7.1. DYNAMIC FREQUENCY SELECTION ....................................................................................... 8 7.1.1. LIMITS ................................................................................................................................. 8 7.1.2. DESCRIPTION OF EUT.................................................................................................... 11 7.1.3. TEST AND MEASUREMENT SYSTEM ......................................................................... 12 7.1.4. SETUP OF EUT AND SUPPORT EQUIPMENT ............................................................. 16 7.1.5. PLOTS OF NOISE, RADAR WAVEFORMS, AND WLAN SIGNALS.......................... 18 7.1.6. TEST CHANNEL AND METHOD ................................................................................... 21 7.1.7. CHANNEL MOVE TIME AND CHANNEL CLOSING TRANSMISSION TIME......... 21 8. SETUP PHOTOS .............................................................................................................................. 24 Page 3 of 25 COMPLIANCE CERTIFICATION SERVICES DOCUMENT NO: CCSUP4031A 561F MONTEREY ROAD, MORGAN HILL, CA 95037 USA TEL: (408) 463-0885 FAX: (408) 463-0888 This report shall not be reproduced except in full, without the written approval of CCS.

REPORT NO: 06U10551-1 DATE: OCTOBER 17, 2006 EUT: 802.11 a/b/g/n Mini-PCI Express Network Adapter FCC ID: PD94965AGN 1. ATTESTATION OF TEST RESULTS COMPANY NAME: Intel 2111 N. E. 25th Ave Hillsboro, OR 97124 EUT DESCRIPTION: 802.11 a/b/g/n Mini-PCI Express Network Adapter MODEL TESTED: 4965agn SERIAL NUMBER: KDR200060806D-2-R4 DATE TESTED: October 16, 2006 APPLICABLE STANDARDS STANDARD TEST RESULTS FCC PART 15 SUBPART E NO NON-COMPLIANCE NOTED Compliance Certification Services, Inc. tested the above equipment in accordance with the requirements set forth in the above standards. The test results show that the equipment tested is capable of demonstrating compliance with the requirements as documented in this report. Note: The results documented in this report apply only to the tested sample, under the conditions and modes of operation as described herein. This document may not be altered or revised in any way unless done so by Compliance Certification Services and all revisions are duly noted in the revisions section. Any alteration of this document not carried out by Compliance Certification Services will constitute fraud and shall nullify the document. No part of this report may be used to claim product certification, approval, or endorsement by NVLAP, NIST, or any government agency. Approved & Released For CCS By: Tested By: ALVIN ILARINA WILLIAM ZHUANG ENGINEERING MANAGER EMC ENGINEER COMPLIANCE CERTIFICATION SERVICES COMPLIANCE CERTIFICATION SERVICES Page 4 of 25 COMPLIANCE CERTIFICATION SERVICES DOCUMENT NO: CCSUP4031A 561F MONTEREY ROAD, MORGAN HILL, CA 95037 USA TEL: (408) 463-0885 FAX: (408) 463-0888 This report shall not be reproduced except in full, without the written approval of CCS.

REPORT NO: 06U10551-1 DATE: OCTOBER 17, 2006 EUT: 802.11 a/b/g/n Mini-PCI Express Network Adapter FCC ID: PD94965AGN 2. TEST METHODOLOGY The tests documented in this report were performed in accordance with ANSI C63.4-2003, FCC CFR 47 Part 2, FCC CFR 47 Part 15 and FCC 06-96 APPENDIX “COMPLIANCE MEASUREMENT PROCEDURES FOR UNLICENSED-NATIONAL INFORMATION INFRASTRUCTURE DEVCIES OPERATING IN THE 5250-5350 MHz AND 5470-5725 MHz BANDS INCORPORATING DYNAMIC FREQUENCY SELECTION”. 3. FACILITIES AND ACCREDITATION The test sites and measurement facilities used to collect data are located at 561F Monterey Road, Morgan Hill, California, USA. The sites are constructed in conformance with the requirements of ANSI C63.4, ANSI C63.7 and CISPR Publication 22. All receiving equipment conforms to CISPR Publication 16-1, “Radio Interference Measuring Apparatus and Measurement Methods.” CCS is accredited by NVLAP, Laboratory Code 200065-0. The full scope of accreditation can be viewed at http://www.ccsemc.com. 4. CALIBRATION AND UNCERTAINTY 4.1. MEASURING INSTRUMENT CALIBRATION The measuring equipment utilized to perform the tests documented in this report has been calibrated in accordance with the manufacturer's recommendations, and is traceable to recognized national standards. Page 5 of 25 COMPLIANCE CERTIFICATION SERVICES DOCUMENT NO: CCSUP4031A 561F MONTEREY ROAD, MORGAN HILL, CA 95037 USA TEL: (408) 463-0885 FAX: (408) 463-0888 This report shall not be reproduced except in full, without the written approval of CCS.

REPORT NO: 06U10551-1 DATE: OCTOBER 17, 2006 EUT: 802.11 a/b/g/n Mini-PCI Express Network Adapter FCC ID: PD94965AGN 5. EQUIPMENT UNDER TEST 5.1. DESCRIPTION OF EUT The 4965agn is an 802.11 a/b/g/n Mini-PCI Express Network Adapter 5.2. SOFTWARE AND FIRMWARE The EUT driver software installed in the host support equipment during testing was 11.0.1.40. The software version of the Access Point was 12.3.8JEA. Page 6 of 25 COMPLIANCE CERTIFICATION SERVICES DOCUMENT NO: CCSUP4031A 561F MONTEREY ROAD, MORGAN HILL, CA 95037 USA TEL: (408) 463-0885 FAX: (408) 463-0888 This report shall not be reproduced except in full, without the written approval of CCS.

REPORT NO: 06U10551-1 DATE: OCTOBER 17, 2006 EUT: 802.11 a/b/g/n Mini-PCI Express Network Adapter FCC ID: PD94965AGN 6. TEST AND MEASUREMENT EQUIPMENT The following test and measurement equipment was utilized for the tests documented in this report: TEST EQUIPMENT LIST Description Manufacturer Model Serial Number Cal Due Spectrum Analyzer 3 Hz ~ 44 G Agilent / HP E4446A US42070220 12/19/2006 Vector Signal Generator 250kHz-20GHz Agilent / HP E8267C US43320336 11/2/2007 Page 7 of 25 COMPLIANCE CERTIFICATION SERVICES DOCUMENT NO: CCSUP4031A 561F MONTEREY ROAD, MORGAN HILL, CA 95037 USA TEL: (408) 463-0885 FAX: (408) 463-0888 This report shall not be reproduced except in full, without the written approval of CCS.

REPORT NO: 06U10551-1 DATE: OCTOBER 17, 2006 EUT: 802.11 a/b/g/n Mini-PCI Express Network Adapter FCC ID: PD94965AGN 7. LIMITS AND RESULTS 7.1. DYNAMIC FREQUENCY SELECTION 7.1.1. LIMITS §15.407 (h) and FCC 06-96 APPENDIX “COMPLIANCE MEASUREMENT PROCEDURES FOR UNLICENSED-NATIONAL INFORMATION INFRASTRUCTURE DEVCIES OPERATING IN THE 5250-5350 MHz AND 5470-5725 MHz BANDS INCORPORATING DYNAMIC FREQUENCY SELECTION”. Table 1: Applicability of DFS requirements prior to use of a channel Requirement Operational Mode Client Client (without Master (with radar radar detection) detection) Non-Occupancy Period Not Yes Yes required DFS Detection Threshold Yes Not Yes required Channel Availability Check Time Yes Not Not required required Uniform Spreading Yes Not Not required required Table 2: Applicability of DFS requirements during normal operation Requirement Operational Mode Master Client Client (without DFS) (with DFS) DFS Detection Threshold Yes Not required Yes Channel Closing Transmission Time Yes Yes Yes Channel Move Time Yes Yes Yes Page 8 of 25 COMPLIANCE CERTIFICATION SERVICES DOCUMENT NO: CCSUP4031A 561F MONTEREY ROAD, MORGAN HILL, CA 95037 USA TEL: (408) 463-0885 FAX: (408) 463-0888 This report shall not be reproduced except in full, without the written approval of CCS.

REPORT NO: 06U10551-1 DATE: OCTOBER 17, 2006 EUT: 802.11 a/b/g/n Mini-PCI Express Network Adapter FCC ID: PD94965AGN Table 3: Interference Threshold values, Master or Client incorporating In-Service Monitoring Maximum Transmit Power Value (see note) ≥ 200 milliwatt -64 dBm < 200 milliwatt -62 dBm Note 1: This is the level at the input of the receiver assuming a 0 dBi receive antenna Note 2: Throughout these test procedures an additional 1 dB has been added to the amplitude of the test transmission waveforms to account for variations in measurement equipment. This will ensure that the test signal is at or above the detection threshold level to trigger a DFS response. Table 4: DFS Response requirement values Parameter Value Non-occupancy period 30 minutes Channel Availability Check Time 60 seconds Channel Move Time 10 seconds Channel Closing Transmission Time 200 milliseconds + approx. 60 milliseconds over remaining 10 second period The instant that the Channel Move Time and the Channel Closing Transmission Time begins is as follows: • For the Short pulse radar Test Signals this instant is the end of the Burst. • For the Frequency Hopping radar Test Signal, this instant is the end of the last radar burst generated. • For the Long Pulse radar Test Signal this instant is the end of the 12 second period defining the radar transmission. The Channel Closing Transmission Time is comprised of 200 milliseconds starting at the beginning of the Channel Move Time plus any additional intermittent control signals required to facilitate channel changes (an aggregate of approximately 60 milliseconds) during the remainder of the 10 second period. The aggregate duration of control signals will not count quiet periods in between transmissions. Page 9 of 25 COMPLIANCE CERTIFICATION SERVICES DOCUMENT NO: CCSUP4031A 561F MONTEREY ROAD, MORGAN HILL, CA 95037 USA TEL: (408) 463-0885 FAX: (408) 463-0888 This report shall not be reproduced except in full, without the written approval of CCS.

REPORT NO: 06U10551-1 DATE: OCTOBER 17, 2006 EUT: 802.11 a/b/g/n Mini-PCI Express Network Adapter FCC ID: PD94965AGN Table 5 – Short Pulse Radar Test Waveforms Radar Type Pulse Width PRI Pulses Minimum Minimum (Microseconds) (Microseconds) Percentage of Trials Successful Detection 1 1 1428 18 60% 30 2 1-5 150-230 23-29 60% 30 3 6-10 200-500 16-18 60% 30 4 11-20 200-500 12-16 60% 30 Aggregate (Radar Types 1-4) 80% 120 Table 6 – Long Pulse Radar Test Signal Radar Bursts Pulses Pulse Chirp PRI Minimum Minimum Waveform per Width Width (µsec) Percentage of Trials Burst (µsec) (MHz) Successful Detection 5 8-20 1-3 50-100 5-20 1000- 80% 30 2000 Table 7 – Frequency Hopping Radar Test Signal Radar Pulse PRI Burst Pulses Hopping Minimum Minimum Waveform Width (µsec) Length per Rate Percentage of Trials (µsec) (ms) Hop (kHz) Successful Detection 6 1 333 300 9 .333 70% 30 Page 10 of 25 COMPLIANCE CERTIFICATION SERVICES DOCUMENT NO: CCSUP4031A 561F MONTEREY ROAD, MORGAN HILL, CA 95037 USA TEL: (408) 463-0885 FAX: (408) 463-0888 This report shall not be reproduced except in full, without the written approval of CCS.

REPORT NO: 06U10551-1 DATE: OCTOBER 17, 2006 EUT: 802.11 a/b/g/n Mini-PCI Express Network Adapter FCC ID: PD94965AGN 7.1.2. DESCRIPTION OF EUT OVERVIEW OF EUT WITH RESPECT TO §15.407 (h) REQUIREMENTS The EUT operates over the 5250-5350 MHz band. The EUT is a Client Device that does not have radar detection capability. The FCC identifier for the Master Device used with it for DFS testing is LDK102056. The 4965AGN includes 2 transmitter and 3 receiver chains, to allow 2x3 MIMO. The maximum antenna gain of the antenna assembly is –0.67 in the 5250-5350 MHz band. The highest power level is 15.8 dBm EIRP. TPC is not required since the maximum EIRP is less than 500 mW (27 dBm). Both of the 50-ohm Tx/Rx antenna ports are connected to the test system via a power combiner/divider to perform conducted tests. WLAN traffic is generated by streaming the video file TestFile.mp2 “6 ½ Magic Hours” from the Master to the Slave in full motion video mode using the media player with the V2.61 Codec package. The EUT utilizes an 802.11a / 802.11 Draft n IP based architecture. Two nominal channel bandwidths, 20 MHz and 40 MHz, are implemented. OVERVIEW OF MASTER DEVICE WITH RESPECT TO §15.407 (h) REQUIREMENTS The Master Device is a Cisco Aironet 1200 AG Series Access Point, FCC ID: LDK102056. The rated output power of the Master unit is > 23dBm (EIRP). Therefore the required interference threshold level is –64 dBm. The calibrated conducted DFS Detection Threshold level is set to –64 dBm. Page 11 of 25 COMPLIANCE CERTIFICATION SERVICES DOCUMENT NO: CCSUP4031A 561F MONTEREY ROAD, MORGAN HILL, CA 95037 USA TEL: (408) 463-0885 FAX: (408) 463-0888 This report shall not be reproduced except in full, without the written approval of CCS.

REPORT NO: 06U10551-1 DATE: OCTOBER 17, 2006 EUT: 802.11 a/b/g/n Mini-PCI Express Network Adapter FCC ID: PD94965AGN 7.1.3. TEST AND MEASUREMENT SYSTEM SYSTEM OVERVIEW The measurement system is based on a conducted test method. The short pulse and long pulse signal generating system utilizes the NTIA software and the same manufacturer / model Vector Signal Generator as the NTIA. The hopping signal generating system utilizes the simulated hopping method. The software selects waveform parameters from within the bounds of the signal type on a random basis using uniform distribution. The short pulse types 2, 3 and 4, and the long pulse type 5 parameters are randomized at run-time. The hopping type 6 pulse parameters are fixed while the hopping sequence is based on the August 2005 NTIA Hopping Frequency List, with the initial starting point randomized at run-time. The signal monitoring equipment consists of a spectrum analyzer with the capacity to display 8192 bins on the horizontal axis. A time-domain resolution of 2 msec / bin is achievable with a 16 second sweep time, meeting the 10 second short pulse reporting criteria. The aggregate ON time is calculated by multiplying the number of bins above a threshold during a particular observation period by the dwell time per bin, with the analyzer set to peak detection and max hold. A time-domain resolution of 3 msec / bin is achievable with a 24 second sweep time, meeting the 22 second long pulse reporting criteria and allowing a minimum of 10 seconds after the end of the long pulse waveform. FREQUENCY HOPPING SIGNAL GENERATION The hopping burst generator is a High Speed Digital I/O card plugged into the control computer. This card utilizes an independent hardware clock reference therefore the output pulse timing is unaffected by host computer operating system latency times. The software selects the hopping sequence as a 100-length segment of the August 2005 NTIA hopping frequency list. This list contains 274 unique pseudorandom sequences. Each such sequence contains 475 frequencies ordered on a random without replacement basis. Each successive trial uses a contiguous 100- length segment from within each successive 475-length sequence in the list. The initial starting point within the list is randomized at run-time such that the first 100-length segment is entirely contained within the first 475-length sequence. The starting point of each successive trial is incremented by 475. Each frequency in the 100-length segment is compared to the boundaries of the EUT Detection Bandwidth and the software creates a hopping burst pattern in accordance with Section 7.4.1.3 Method #2 Simulated Freqeuncy Hopping Radar Waveform Generating Subsystem of FCC 06-96 APPENDIX. The frequency of the signal generator is incremented in 1 MHz steps from FL to FH for each successive trial. This incremental sequence is repeated as required to generate a minimum of 30 total trials and to maintain a uniform frequency distribution over the entire Detection Bandwidth. Page 12 of 25 COMPLIANCE CERTIFICATION SERVICES DOCUMENT NO: CCSUP4031A 561F MONTEREY ROAD, MORGAN HILL, CA 95037 USA TEL: (408) 463-0885 FAX: (408) 463-0888 This report shall not be reproduced except in full, without the written approval of CCS.

REPORT NO: 06U10551-1 DATE: OCTOBER 17, 2006 EUT: 802.11 a/b/g/n Mini-PCI Express Network Adapter FCC ID: PD94965AGN CONDUCTED METHOD SYSTEM BLOCK DIAGRAM 10 MHz Frequency Reference Vector Spectrum Analyzer Signal Generator RF OUT RF IN Common Spectrum Analyzer 10 dB Pad Combiner/Divider Port 1 Port 2 10 dB Pad Port 1 Port 2 Signal Generator Combiner/Divider Common Slave Step Attenuator Master Step Attenuator Link Step Attenuator Port 1 Port 2 Port 1 Port 2 Master Slave Combiner/Divider Combiner/Divider Common Common 10 dB Pad 10 dB Pad Common Common Master Diversity Slave Diversity Combiner/Divider Combiner/Divider Port 1 Port 2 Port 1 Port 2 Master Device Slave Device Page 13 of 25 COMPLIANCE CERTIFICATION SERVICES DOCUMENT NO: CCSUP4031A 561F MONTEREY ROAD, MORGAN HILL, CA 95037 USA TEL: (408) 463-0885 FAX: (408) 463-0888 This report shall not be reproduced except in full, without the written approval of CCS.

REPORT NO: 06U10551-1 DATE: OCTOBER 17, 2006 EUT: 802.11 a/b/g/n Mini-PCI Express Network Adapter FCC ID: PD94965AGN MEASUREMENT SYSTEM FREQUENCY REFERENCE Lock the signal generator and the spectrum analyer to the same reference source as follows: Connect the 10 MHz OUT (SWITCHED) on the spectrum analyer to the 10 MHz IN on the signal generator and set the spectrum analyzer 10 MHz Out to On. SYSTEM CALIBRATION Adjust the Master Step Attenuator to 30 dB, the Link Step Attenuator to 70 dB, and the Slave Step Attenuator to 70 dB. If required, disconnect the spectrum analyzer, Master Device, and Slave Device from the test system. Terminate the Common port of the Spectrum Analyzer Combiner/Divider, Port 2 of the Master Diversity Combiner/Divider, and Ports 1 and 2 of the Slave Diversity Combiner/Divider. Leave, or connect, the appropriate cable to Port 1 of the Master Diversity Combiner/Divider and connect the free end (Master Device end) of this cable to the spectrum analyzer. Adjust the signal generator and spectrum analyzer to the center frequency of the channel to be measured. Set the signal generator to CW mode. Set the RBW of the spectrum analyzer to 10 kHz and the span to 100 kHz. Adjust the amplitude of the signal generator to yield a measured level of –64 dBm on the spectrum analyzer. Without changing any of the instrument settings, reconnect the spectrum analyer to the Common port of the Spectrum Analyzer Combiner/Divider, then remove the cable from Port 1 of the Master Diversity Combiner/Divider and replace this cable with a termination. Measure the amplitude and calculate the difference from –64 dBm. Adjust the Reference Level Offset of the spectrum analyzer to this difference. Confirm that the signal is displayed at –64 dBm. Readjust the RBW and VBW to 3 MHz, set the span to 10 MHz, and confirm that the signal is still displayed at –64 dBm. This Reference Level Offset setting is used for all tests for which the Master Step Attenuator is set to 30 dB. The spectrum analyzer displays the level of the signal generator as received at the antenna ports of the Master Device. The interference detection threshold may be varied from the calibrated value of –64 dBm and the spectrum analyzer will still indicate the level as received by the Master Device. The Link Step Attenuator and Slave Step Attenuator settings may be changed without affecting the System Calibration. The System Calibration process must be repeated for different settings of the Master Step Attenuator to determine the Reference Level Offset associated with each Master Step Attenuator setting. Page 14 of 25 COMPLIANCE CERTIFICATION SERVICES DOCUMENT NO: CCSUP4031A 561F MONTEREY ROAD, MORGAN HILL, CA 95037 USA TEL: (408) 463-0885 FAX: (408) 463-0888 This report shall not be reproduced except in full, without the written approval of CCS.

REPORT NO: 06U10551-1 DATE: OCTOBER 17, 2006 EUT: 802.11 a/b/g/n Mini-PCI Express Network Adapter FCC ID: PD94965AGN INTERFERENCE DETECTION THRESHOLD ADJUSTMENT Set the signal generator to produce the specified radar waveform, trigger a burst manually and measure the amplitude on the spectrum analyzer. Readjust the amplitude of the signal generator as required so that the peak level of the waveform is at a displayed level equal to the required or desired interference detection threshold. ADJUSTMENT OF DISPLAYED TRAFFIC LEVEL Establish a link between the Master and Slave, adjusting the Link Step Attenuator as needed to provide an adequate RSS level at the Master and Slave devices. Stream the video test file to generate WLAN traffic. Adjust the Slave Step Attenuator so that the WLAN traffic level from the Slave, as displayed on the spectrum analyzer, is at lower amplitude than the radar detection threshold. Confirm that the displayed traffic is from the Slave Device by changing the setting of the Slave Step Attenuator and verifying that the displayed traffic level changes accordingly. Confirm that the displayed traffic does not include Master Device traffic by changing the setting of the Master Step Attenuator and the Link Step Attenuator and verifying that the displayed traffic level does not change. Reset all Step Attenuators to their previous settings. If the above conditions cannot be met, use a different setting of the Master Step Attenuator, performing a new System Calibration and Interference Detection Threshold Adjustment as required for the new Master Step Attenuator setting. Page 15 of 25 COMPLIANCE CERTIFICATION SERVICES DOCUMENT NO: CCSUP4031A 561F MONTEREY ROAD, MORGAN HILL, CA 95037 USA TEL: (408) 463-0885 FAX: (408) 463-0888 This report shall not be reproduced except in full, without the written approval of CCS.

REPORT NO: 06U10551-1 DATE: OCTOBER 17, 2006 EUT: 802.11 a/b/g/n Mini-PCI Express Network Adapter FCC ID: PD94965AGN 7.1.4. SETUP OF EUT AND SUPPORT EQUIPMENT SUPPORT EQUIPMENT PERIPHERAL SUPPORT EQUIPMENT LIST Description Manufacturer Model Serial Number FCC ID AC Adapter Delta 34-1977-03 PZT0628359656 DoC Access Point Cisco Aironet 1200 AG FTX1035B0EB LDK102056 Laptop Lenovo HDL20010004 2039982400024 DoC AC Adapter IBM 92P1154 9IW0529000190 DoC Laptop Dell Latitude D610 433598 DoC AC Adapter Dell PA-1900-02D CN-09T215-48010-38P-1AC8 DoC I/O CABLES I/O CABLE LIST Cable Port # of Connector Cable Cable No. Identical Type Type Length Ports 1 AC 1 US 115V Direct Plug 0m 2 DC 1 DC Un-shielded 2m 3 AC 1 US 115V Un-shielded 1m 4 DC 1 DC Un-shielded 2m 5 Ethernet 1 RJ45 Un-shielded 2m 6 Serial 1 USB to DIN Shielded 2.5m 7 AC 1 US 115V Un-shielded 2m 8 DC 1 DC Un-shielded 2m TEST SETUP The EUT is installed in a host laptop computer and a network connection is made with the Cisco access point. Page 16 of 25 COMPLIANCE CERTIFICATION SERVICES DOCUMENT NO: CCSUP4031A 561F MONTEREY ROAD, MORGAN HILL, CA 95037 USA TEL: (408) 463-0885 FAX: (408) 463-0888 This report shall not be reproduced except in full, without the written approval of CCS.

REPORT NO: 06U10551-1 DATE: OCTOBER 17, 2006 EUT: 802.11 a/b/g/n Mini-PCI Express Network Adapter FCC ID: PD94965AGN TEST SETUP Antenna Port RF Connections to Test Instrument Setup Master Device (Ancillary Support) Slave Device 5 (EUT) 6 PC Controller and Server Host Computer 4 8 2 AC Adapter AC Adapter 3 7 AC Adapter 1 115VAC / 60Hz Page 17 of 25 COMPLIANCE CERTIFICATION SERVICES DOCUMENT NO: CCSUP4031A 561F MONTEREY ROAD, MORGAN HILL, CA 95037 USA TEL: (408) 463-0885 FAX: (408) 463-0888 This report shall not be reproduced except in full, without the written approval of CCS.

REPORT NO: 06U10551-1 DATE: OCTOBER 17, 2006 EUT: 802.11 a/b/g/n Mini-PCI Express Network Adapter FCC ID: PD94965AGN 7.1.5. PLOTS OF NOISE, RADAR WAVEFORMS, AND WLAN SIGNALS PLOT OF SYSTEM NOISE FLOOR NOISE FLOOR Page 18 of 25 COMPLIANCE CERTIFICATION SERVICES DOCUMENT NO: CCSUP4031A 561F MONTEREY ROAD, MORGAN HILL, CA 95037 USA TEL: (408) 463-0885 FAX: (408) 463-0888 This report shall not be reproduced except in full, without the written approval of CCS.

REPORT NO: 06U10551-1 DATE: OCTOBER 17, 2006 EUT: 802.11 a/b/g/n Mini-PCI Express Network Adapter FCC ID: PD94965AGN PLOTS OF RADAR WAVEFORM SHORT PULSE RADAR TYPE 1 Page 19 of 25 COMPLIANCE CERTIFICATION SERVICES DOCUMENT NO: CCSUP4031A 561F MONTEREY ROAD, MORGAN HILL, CA 95037 USA TEL: (408) 463-0885 FAX: (408) 463-0888 This report shall not be reproduced except in full, without the written approval of CCS.

REPORT NO: 06U10551-1 DATE: OCTOBER 17, 2006 EUT: 802.11 a/b/g/n Mini-PCI Express Network Adapter FCC ID: PD94965AGN PLOT OF WLAN TRAFFIC FROM SLAVE WLAN TRAFIC Page 20 of 25 COMPLIANCE CERTIFICATION SERVICES DOCUMENT NO: CCSUP4031A 561F MONTEREY ROAD, MORGAN HILL, CA 95037 USA TEL: (408) 463-0885 FAX: (408) 463-0888 This report shall not be reproduced except in full, without the written approval of CCS.

REPORT NO: 06U10551-1 DATE: OCTOBER 17, 2006 EUT: 802.11 a/b/g/n Mini-PCI Express Network Adapter FCC ID: PD94965AGN 7.1.6. TEST CHANNEL AND METHOD All tests were performed at a channel center frequency of 5300 MHz utilizing a conducted test method. 7.1.7. CHANNEL MOVE TIME AND CHANNEL CLOSING TRANSMISSION TIME GENERAL REPORTING NOTES The reference marker is set at the end of last radar pulse. The delta marker is set at the end of the last WLAN transmission following the radar pulse. This delta is the channel move time. The aggregate channel closing transmission time is calculated as follows: Aggregate Transmission Time = (Number of analyzer bins showing transmission) * (dwell time per bin) The observation period over which the aggregate time is calculated Begins at (Reference Marker + 200 msec) and Ends no earlier than (Reference Marker + 10 sec). Page 21 of 25 COMPLIANCE CERTIFICATION SERVICES DOCUMENT NO: CCSUP4031A 561F MONTEREY ROAD, MORGAN HILL, CA 95037 USA TEL: (408) 463-0885 FAX: (408) 463-0888 This report shall not be reproduced except in full, without the written approval of CCS.

REPORT NO: 06U10551-1 DATE: OCTOBER 17, 2006 EUT: 802.11 a/b/g/n Mini-PCI Express Network Adapter FCC ID: PD94965AGN TYPE 1 CHANNEL MOVE TIME RESULTS No non-compliance noted: Channel Move Time Limit (s) (s) 0.000 10 MOVE TIME PLOT FOR SHORT PULSE TYPE 1 RADAR Page 22 of 25 COMPLIANCE CERTIFICATION SERVICES DOCUMENT NO: CCSUP4031A 561F MONTEREY ROAD, MORGAN HILL, CA 95037 USA TEL: (408) 463-0885 FAX: (408) 463-0888 This report shall not be reproduced except in full, without the written approval of CCS.

REPORT NO: 06U10551-1 DATE: OCTOBER 17, 2006 EUT: 802.11 a/b/g/n Mini-PCI Express Network Adapter FCC ID: PD94965AGN TYPE 1 CHANNEL CLOSING TRANSMISSION TIME RESULTS No non-compliance noted: Aggregate Transmission Time Limit Margin (ms) (ms) (ms) 0.00 60 60.00 Only intermittent transmissions are observed during the aggregate monitoring period. AGGREGATE CLOSING TIME PLOT Page 23 of 25 COMPLIANCE CERTIFICATION SERVICES DOCUMENT NO: CCSUP4031A 561F MONTEREY ROAD, MORGAN HILL, CA 95037 USA TEL: (408) 463-0885 FAX: (408) 463-0888 This report shall not be reproduced except in full, without the written approval of CCS.

REPORT NO: 06U10551-1 DATE: OCTOBER 17, 2006 EUT: 802.11 a/b/g/n Mini-PCI Express Network Adapter FCC ID: PD94965AGN 8. SETUP PHOTOS DYNAMIC FREQUENCY SELECTION MEASUREMENT SETUP DFS FRONT PHOTO Page 24 of 25 COMPLIANCE CERTIFICATION SERVICES DOCUMENT NO: CCSUP4031A 561F MONTEREY ROAD, MORGAN HILL, CA 95037 USA TEL: (408) 463-0885 FAX: (408) 463-0888 This report shall not be reproduced except in full, without the written approval of CCS.

REPORT NO: 06U10551-1 DATE: OCTOBER 17, 2006 EUT: 802.11 a/b/g/n Mini-PCI Express Network Adapter FCC ID: PD94965AGN DFS BACK PHOTO END OF REPORT Page 25 of 25 COMPLIANCE CERTIFICATION SERVICES DOCUMENT NO: CCSUP4031A 561F MONTEREY ROAD, MORGAN HILL, CA 95037 USA TEL: (408) 463-0885 FAX: (408) 463-0888 This report shall not be reproduced except in full, without the written approval of CCS.


Document Created: 2006-10-19 01:13:07
Document Modified: 2006-10-19 01:13:07
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC