18_DWR-920V RFExp r2

FCC ID: KA2WR920VA1-1

RF Exposure Info

Download: PDF
FCCID_4299975

FCC RF EXPOSURE REPORT FCC ID: KA2WR920VA1-1 Project No. : 1901H008A Equipment : CPE Model Name : DWR-920V Series Model : N/A Applicant : D-Link Corporation Address : No.289, Xinhu 3rd Rd., Neihu District, Taipei 11494, Taiwan According: : FCC Guidelines for Human Exposure IEEE C95.1 & FCC Part 2.1091 BTL INC. No. 29, Jintang Road, Tangzhen Industry Park, Pudong New Area, Shanghai 201210,China TEL: +86-021-61765666 Report No.: BTL-FCCP-5-1901H008A Page 1 of 7 Report Version: R01

. GENERAL SUMMARY Equipment : CPE Brand Name : D-Link Test Model : DWR-920V Series Model : N/A Applicant : D-Link Corporation Manufacturer : D-Link Corporation Address : No.289, Xinhu 3rd Rd., Neihu District, Taipei 11494, Taiwan Date of Test : Mar. 19, 2019~Apr. 18, 2019 Test Sample : Engineering Sample No.: B190301797 Standards : FCC Title 47 Part 2.1091, OET Bulletin 65 Supplement C The above equipment has been tested and found compliance with the requirement of the relative standards by BTL Inc. The test data, data evaluation, and equipment configuration contained in our test report (Ref No. BTL-FCCP-5-1901H008A) were obtained utilizing the test procedures, test instruments, test sites that has been accredited by the Authority of A2LA according to the ISO/IEC 17025 quality assessment standard and technical standard(s). Report No.: BTL-FCCP-5-1901H008A Page 2 of 7 Report Version: R01

3ULL . MPE CALCULATION METHOD Calculation Method of RF Safety Distance: 6 . 16_HBP in 4n‘ where: S = power density P = power input to the antenna G = power gain of the antenna in the direction of interest relative to an isotropic radiator R = distance to the center of radiation of the antenna Table for Filed Antenna: For 2.4GHz Ant. Brand P/N Antenna Type Connector Gain(dBi) 1 N/A N/A PCB N/A 1 2 N/A N/A PCB N/A 1 Note: This EUT supports MIMO 2X2, any transmit signals are correlated with each other. Then, Directional gain =10log[(10°2%%10©>"%+...10°~>%2/N]dBi. So, (1) For Non Beamforming function, Directional gain=10log[(10°4""+10}4%%"/21dBi =4.01. The output power limit is 30—4.01+6=31.99, the power density limit is 17—4.01+6=18.99. (2) For Beamforming function, Beamforming Gain: 2dBi. So, Directional gain=1+2=3dBi. Then, the output power limit is 30—3+6=33, the power density limit is 17—3+6=20. The worst case for 1TX/2TX as follow: Operating Mode TX Mode 1TX 21X 802.11b V (ANT 2) — 802.11g V (ANT 2) — 802.11n(20 MHz) — V (ANT 1+ANT 2) 802.11n(40 MHz) — V (ANT 1+ANT 2) For LTE Band 2 Ant. Brand P/N Antenna Type Connector Gain(dBi) 1 N/A N/A External N/A 4.1. For LTE Band 5 Ant. Brand P/N Antenna Type Connector Gain(dBi) 1 N/A N/A External N/A —0.83 For LTE Band 4 Ant. Brand P/N Antenna Type Connector Gain(dBi) 1 N/A N/A External N/A 2.73 Report No.: BTL—FCCP—5—1901H008A Page 3 of 7 Report Version: RO1

For LTE Band 12 Ant. Brand P/N Antenna Type Connector Gain(dBi) 1 N/A N/A External N/A -0.81 For LTE Band 41 Ant. Brand P/N Antenna Type Connector Gain(dBi) 1 N/A N/A PCB N/A -4 For LTE Band 66 Ant. Brand P/N Antenna Type Connector Gain(dBi) 1 N/A N/A External N/A 2.45 For WCDMA Band II Ant. Brand P/N Antenna Type Connector Gain(dBi) 1 N/A N/A PCB N/A -4 For WCDMA Band V Ant. Brand P/N Antenna Type Connector Gain(dBi) 1 N/A N/A PCB N/A -4 Report No.: BTL-FCCP-5-1901H008A Page 4 of 7 Report Version: R01

. TEST RESULTS For 2.4GHz Non-Beamforming Directional Directional Power Limit of Power Max Output Max Output Test gain gain Density (S) Density (S) Power (dBm) Power (mW) Result (dBi) (numeric) (mW/cm2) (mW/cm2) 4.01 2.5177 23.45 221.3095 0.11090 1 Complies For 2.4GHz with Beamforming Directional Directional Power Limit of Power Max Output Max Output Test gain gain Density (S) Density (S) Power (dBm) Power (mW) Result (dBi) (numeric) (mW/cm2) (mW/cm2) 3.00 1.9953 22.65 184.0772 0.07311 1 Complies For LTE Band 2 Limit of Power Max EIRP Max EIRP Power Density (S) Density (S) Test Result (dBm) (mW) (mW/cm2) (mW/cm2) 26.64 461.3176 0.09182 1 Complies For LTE Band 4 Limit of Power Max EIRP Max EIRP Power Density (S) Density (S) Test Result (dBm) (mW) (mW/cm2) (mW/cm2) 25.42 348.3373 0.06933 1 Complies For LTE Band 66 Limit of Power Max EIRP Max EIRP Power Density (S) Density (S) Test Result (dBm) (mW) (mW/cm2) (mW/cm2) 25.61 363.9150 0.07244 1 Complies For LTE Band 41 Limit of Power Max EIRP Max EIRP Power Density (S) Density (S) Test Result (dBm) (mW) (mW/cm2) (mW/cm2) 18.87 77.0903 0.01534 1 Complies Report No.: BTL-FCCP-5-1901H008A Page 5 of 7 Report Version: R01

For LTE Band 5 ERP=EIRP-2.15 Limit of Power Max EIRP Max EIRP Power Density (S) Density (S) Test Result (dBm) (mW) (mW/cm2) (mW/cm2) 19.82 95.9401 0.01910 1 Complies For LTE Band 12 ERP=EIRP-2.15 Limit of Power Max EIRP Max EIRP Power Density (S) Density (S) Test Result (dBm) (mW) (mW/cm2) (mW/cm2) 21.87 153.8155 0.03062 1 Complies For WCDMA Band II ERP=EIRP-2.15 Limit of Power Max EIRP Max EIRP Power Density (S) Density (S) Test Result (dBm) (mW) (mW/cm2) (mW/cm2) 20.25 105.9254 0.13241 1 Complies For WCDMA Band V ERP=EIRP-2.15 Limit of Power Max EIRP Max EIRP Power Density (S) Density (S) Test Result (dBm) (mW) (mW/cm2) (mW/cm2) 18.71 74.302 0.09288 1 Complies Report No.: BTL-FCCP-5-1901H008A Page 6 of 7 Report Version: R01

For the max simultaneous transmission MPE: Power Density Power Density Power Density Limit of (S) (mW/cm2) (S) (mW/cm2) (S) (mW/cm2) Power Total Test Result Density (S) 2.4G WCDMA LTE (mW/cm ) 2 0.11090 0.13241 0.24331 1 Complies 0.11090 0.09182 0.20272 1 Complies Note: the calculated distance is 20 cm. End of Test Report Report No.: BTL-FCCP-5-1901H008A Page 7 of 7 Report Version: R01


Document Created: 2019-05-31 09:52:16
Document Modified: 2019-05-31 09:52:16
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC