USERS MANUAL

FCC ID: KA2WM157B1

Users Manual

Download: PDF
FCCID_1883339

HSPA+ USB Adapter DWM‐157 User Manual

Index HSPA+ USB Adapter Introduction .................................. 2 Internet service .............................................................. 5 SMS service .................................................................... 6 Contacts ....................................................................... 10 Voice Call...................................................................... 13 USSD............................................................................. 14 Settings ........................................................................ 15 FAQs ............................................................................. 19

HSPA+ USB ADAPTER INTRODUCTI ON 1. To launch the Network Connect, double‐click the shortcut icon on the desktop. It should be noted that:  If the PIN code enabled, enter the correct one, then click OK. The (U)SIM will be locked after three retries of incorrect PIN code inputting;  Enter the correct PUK to retrieve the default PIN code. After ten retries of incorrect PUK code inputting, please contact with your service provider;  With the wrong PIN and PUK, all the network services are unavailable. 2. Main interface introduction : Connection : Access to the Text Message : Access to the Phonebook interface ：Access to Voice call interface

: Access to USSD : Access to check usage statistics : Set parameters options : Help (User Manual) 3. Status information Status Description New message New message(s) arrived. Message full Indicates the (U)SIM’s storage of SMS No device Indicates that system cannot find the device. Initializing Indicates that the device is in the process Searching The device is searching for the network. No service No suitable network.

No (U)SIM card (U)SIM card not inserted or the device Invalid (U)SIM card The (U)SIM is out of service. Network signal Indicate the signal strength of Network type GSM/GPRS, UMTS. Data service EDGE available, HSPA 4. LED Indicator description State of LED indicator Description RED Solid On No SIM card/ Error Green Solid On Register to network (not connect) Green blinking Connected to network *Green blinking: Flash once every 0.5 seconds)

IN TERN ET SERVICE 1. Connecting with the default connection profile  Click to set up the connection; 2. Statistics information The following window will be displayed at lower right corner of main interface when connecting to the internet. 3. Disconnect from the internet Click to disconnect the internet connection.

SMS SERVICE Click to enter SMS (Short Message Service) service interface. 1. Creating and sending a message. Click :  Input the recipient number by one of the following options:  Enter the number directly;  Click Send to, choose the recipient number from the phonebook and add to the sending list , then click OK.  Enter the message content;  Click Send or Save to Draft. The message will be saved in the Draft when failed to send. Note:  You can group send a message at most 100 recipients;  Each number should be separated by “,”;

 The message cannot expand 2,048 characters at most. 2. Inbox  The following prompt box will be displayed when received a new message;  Reply : Access the edit interface, write the content, click Send or Save to Draft;  Forward : Forward the selected message;  Delete : Delete the selected message. Note:  The new message will be saved in PC when Connect running only, else in (U)SIM instead.  You can use “Shift” or “Ctrl” to selected several messages; 3. Outbox The message in the Outbox can be deleted or forwarded.

4. Draft  The MSG sent unsuccessfully will be saved in the Draft .  Click the selected message;  Confirm the recipient and the content, and click Send or Save to Draft. 5. Recycle All deleted information will be saved in the Recycle. 6. The selected SMS can be operated as follows:  Save number: To save the sender’s information to the (U)SIM card or PC.  Delete text message: To delete the selected message.  Move to: To move the selected message to Outbox or Draft.  Copy to: To copy the selected message to Outbox or Draft.

 SMS Export  Right‐click the selected the message;  Click SMS Export ;  Specify the path and the file name, and click Save. Note: The exported message will be saved as a *.csv file.

CON TA CTS Click to enter Contacts interface. 1. New  Click ;  Enter the Name and Mobile, and save it in the (U)SIM card or PC. 2. Searching a contact  Click ;  Enter the key characters of you want to find in the ;  The result will be displayed in turn. 3. Viewing a contact  Click Local or (U)SIM to display the contacts interface accordingly;  Select a contact, then you can operate as follows:

 Edit : Modify the selected contact;  Delete : Delete the selected contact;  Send SMS : Send a message to the selected contact;  Copy to: Copy the contact between (U)SIM card and PC. Note: The deleted contact information cannot be retrieved. 4. Import  Right‐click the mouse;  Click Contacts Import;  Select the *.vcf or *.csv file and click Open;  The import file will be saved in the current interface. 5. Export  Right‐click the selected contact;  Click Contacts Export;  You can saved the contact file as *.csv file or *.vcf file;

 Confirm the name and the path the file saved, then click Save.

VOICE CALL Click to enter voice call interface. 1. Dial operation Enter voice call interface, you can enter the call number by dial number pad, then click to dial. When connected, you can click volume button to adjust the volume; when you click , you can hang up the current call. 2. Incoming call operation The following prompt box will be displayed when incoming call. Click “Answer” button to answer the call; Click “Hangup” button to reject the call

USSD Click to enter USSD interface. You can add, edit, delete, and send USSD operation. The result of sending will display on the edit box.

SETTIN GS Click to list the functions. 1. PIN Management  Enable PIN  Click Enable PIN;  Enter the correct PIN code and click OK. Note: The PIN code should be a numeric string of 4‐8 digits.  Disable PIN  Click Disable PIN;  Enter the correct PIN code and click OK.  Modify PIN  Click Modify PIN;  Enter the old PIN code and new PIN code, confirm the new PIN code and click OK.

2. Options (also can use )  General You may choose the alert tone when connected/disconnected to the internet.  Text Message Setting  You may active the message alert tone, and also can set up your favorite tone via selecting a *.wav file in the PC.  The number showed in the SMS center is read from the (U)SIM card automatically; modification is not recommended; Note: SMS would not work with the wrong SMSC. Contact with the service provider to get the correct SMSC. You may select the period in the drop‐box, it specifies the validity which the message would save in the network; Note: The validity setting of SMS should be supported by the network.  Network  Network Type

 You can choose Auto or Only UMTS/HSPA or Only GPRS/EDGE. The device will register network according to the selected mode.  The default mode is Auto.  Registration Mode  Auto search and register is set as default value;  Select Manual search and register before dialing, available networks will be listed when finished;  Select an available network and click Register, and then the device will try to register.  Statistics  You can get the statistics of daily/weekly/monthly/yearly report on downloading/uploading/connection time  Diagnostic  Language Selection  You can choose the different language UI

3. Contacts Import For more details, refer to Internet Contacts‐4. 4. Contacts Export For more details, refer to Internet Contacts‐5. 5. SMS Export For more details, refer to Internet Text Message‐5. 6. Help &About  Help: To open the User Manual  About: To get the Connection Manager information. 7. Show Menu Bar You can display/not display the Menu Bar

FAQS 1. Q: What shall I do if I cannot connect to the internet? A: Checking Setting and check the Profile is correct to match the (U)SIM card operator. If not, can manual to enter the APN information to connect to the internet. 2. Q: Why can’t I receive the message? A: Please confirm whether the (U)SIM’s SMS memory is full or not. 3. Q: Why the software doesn’t run automatically when the device is plugged in? A: Click My computer‐>data card disk‐>StartModem.exe. Or run the Connection Manager from Start of the OS if D‐Link Connection Manager was installed.

CE WARN IN G: Users have to use the connection to USB interfaces with USB 2.0 version or higher. Please make sure the temperature for device will not be higher than 45 ˚C The device is tested for typical body worn operation. The minimum distance between the user and/or any bystander and the radiating structure of the transmitter is 1.0cm. Declaration of Conformity We, D‐Link Corporation, Address: No.289, Sinhu 3rd rd., Neihu District, Taipei City 114, Taiwan Declare under our own responsibility that the product: Model: DWM‐157 Intended use: HSPA+ USB Adapter

Complies with the essential requirements of Article 3 of the R&TTE 1999/5/EC Directive, if used for its intended use and that the following standards have been applied: 1. Health (Article 3.1(a) of the R&TTE Directive)  EN 62311: 2008/ EN 62209‐2:2010 2. Safety (Article 3.1(a) of the R&TTE Directive) Applied Standard(s):  EN 60950‐1:2006+A11:2009+A1:2010+A12:2011 3. Electromagnetic compatibility (Article 3.1 (b) of the R&TTE Directive) Applied Standard(s):  EN 301 489‐1 V1.9.2/‐7 V1.3.1/‐24 V1.5.1 4. Radio frequency spectrum usage (Article 3.2 of the R&TTE Directive) Applied Standard(s):  EN 301 511 V9.0.2  EN 301 908‐1 V5.2.1/ ‐2 V5.2.1 All the reports of the applied standards have the Positive Opinion of Notified Body: PHONEIX TESTLAB, Königswinkel 10 D‐32825 Blomberg, Germany

FCC WA RN IN G: FCC Regulations: This device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiated radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: ‐Reorient or relocate the receiving antenna. ‐Increase the separation between the equipment and receiver. ‐Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

‐Consult the dealer or an experienced radio/TV technician for help. Changes or modifications not expressly approved by the party responsible for compliance could void the user‘s authority to operate the equipment. The antenna(s) used for this transmitter must not be co‐located or operating in conjunction with any other antenna or transmitter.

4RF EXPOSURE INFORMATION (SAR) This device meets the government’s requirements for exposure to radio waves. This device is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government. The exposure standard for wireless device employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6W/kg. *Tests for SAR are conducted using standard operating positions accepted by the FCC with the device transmitting at its highest certified power level in all tested frequency bands. Although the SAR is determined at the highest certified power level, the actual SAR level of the device while operating can be well below the maximum value. This is because the device is designed to operate at multiple power levels so as to use only the poser required to reach the network. In general, the closer you are to a wireless base station antenna, the lower the power output. SAR compliance has been established in the host product(s) (laptop computers), tested at 5mm separation distance and tested

with USB slot configurations including Horizontal‐UP, Horizontal‐Down, Vertical‐Front, Vertical‐Back. This device can be used in host product(s) with substantially similar physical dimensions, construction, and electrical and RF characteristics. The highest SAR value, tested per FCC RF exposure guidelines for USB dongle, as described in this user guide, is 0.71 W/kg. The FCC has granted an Equipment Authorization for this device with all reported SAR levels evaluated as in compliance with the FCC RF exposure guidelines. SAR information on this device is on file with the FCC and can be found under the Display Grant section of www.fcc.gov/oet/ea/fccid after searching on FCC ID: KA2WM157B1 .


Document Created: 2013-01-07 16:49:17
Document Modified: 2013-01-07 16:49:17
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC