MPE Report

FCC ID: KA2WL7620APA1

RF Exposure Info

Download: PDF
FCCID_4002455

RF Exposure Report Report No.: SA170801C10B FCC ID: KA2WL7620APA1 Model: DWL-7620AP Received Date: Aug. 01, 2017 Test Date: Aug. 07 ~ Aug. 30, 2017 Issued Date: Aug. 10, 2018 Applicant: D-Link Corporation Address: 17595 Mt. Herrmann, Fountain Valley, California, United States, 92708 Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Lab Address: No. 47-2, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan, R.O.C. Test Location: No. 19, Hwa Ya 2nd Rd., Wen Hwa Vil., Kwei Shan Dist., Taoyuan City 33383, TAIWAN (R.O.C.) This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. The report must not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. Report No.: SA170801C10B Page No. 1 / 6 Report Format Version: 6.1.1 Reference No.: 180808C21

Table of Contents Release Control Record .................................................................................................................................. 3 1 Certificate of Conformity...................................................................................................................... 4 2 RF Exposure .......................................................................................................................................... 5 2.1 Limits for Maximum Permissible Exposure (MPE) .............................................................................. 5 2.2 MPE Calculation Formula ................................................................................................................... 5 2.3 Classification ....................................................................................................................................... 5 3 Calculation Result of Maximum Conducted Power........................................................................... 6 Report No.: SA170801C10B Page No. 2 / 6 Report Format Version: 6.1.1 Reference No.: 180808C21

Release Control Record Issue No. Description Date Issued SA170801C10B Original release Aug. 10, 2018 Report No.: SA170801C10B Page No. 3 / 6 Report Format Version: 6.1.1 Reference No.: 180808C21

1 Certificate of Conformity Product: Unified AC Tri-band PoE Access Point Brand: D-Link Corporation Model: DWL-7620AP Sample Status: Identical Prototype Applicant: D-Link Corporation Test Date: Aug. 07 ~ Aug. 30, 2017 Standards: FCC Part 2 (Section 2.1091) KDB 447498 D03 (January 17, 2014) IEEE C95.1 The above equipment has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s RF characteristics under the conditions specified in this report. Prepared by : , Date: Aug. 10, 2018 Pettie Chen / Senior Specialist Approved by : , Date: Aug. 10, 2018 Bruce Chen / Project Engineer Report No.: SA170801C10B Page No. 4 / 6 Report Format Version: 6.1.1 Reference No.: 180808C21

2 RF Exposure 2.1 Limits for Maximum Permissible Exposure (MPE) Frequency Range Electric Field Magnetic Field Power Density Average Time (MHz) Strength (V/m) Strength (A/m) (mW/cm2) (minutes) Limits For General Population / Uncontrolled Exposure 0.3-1.34 614 1.63 (100)* 30 2 1.34-30 824/f 2.19/f (180/f )* 30 30-300 27.5 0.073 0.2 30 300-1500 … … f/1500 30 1500-100,000 … … 1.0 30 f = Frequency in MHz; *Plane-wave equivalent power density 2.2 MPE Calculation Formula Pd = (Pout*G) / (4*pi*r2) where Pd = power density in mW/cm2 Pout = output power to antenna in mW G = gain of antenna in linear scale Pi = 3.1416 R = distance between observation point and center of the radiator in cm 2.3 Classification The antenna of this product, under normal use condition, is at least 25cm away from the body of the user. So, this device is classified as Mobile Device. Report No.: SA170801C10B Page No. 5 / 6 Report Format Version: 6.1.1 Reference No.: 180808C21

3 Calculation Result of Maximum Conducted Power Frequency Band Max Power Antenna Gain Distance Power Density Limit (MHz) (dBm) (dBi) (cm) (mW/cm2) (mW/cm2) CDD Mode 2412-2462 27.20 6.26 25 0.282 1 5180-5240 28.86 7.31 25 0.527 1 5260-5320 23.99 7.31 25 0.172 1 5500-5720 23.89 7.31 25 0.168 1 5745-5825 29.81 7.31 25 0.656 1 Beamforming Mode 2412-2462 23.88 6.26 25 0.131 1 5180-5240 24.58 7.31 25 0.197 1 5260-5320 20.98 7.31 25 0.086 1 5500-5720 20.88 7.31 25 0.084 1 5745-5825 26.35 7.31 25 0.296 1 Note: 2.4GHz Band: Directional gain = 3.25dBi + 10log(2) = 6.26dBi 5GHz Band: Directional gain = 4.3dBi +10log (2) = 7.31dBi Conclusion: 2.4GHz & 5GHz Band 1, 2 or 2.4GHz & 5GHz Band 3 or 2.4GHz & 5GHz Band 4 can transmit at same time. The formula of calculated the MPE is: CPD1 / LPD1 + CPD2 / LPD2 + ……etc. < 1 CPD = Calculation power density LPD = Limit of power density 1. WLAN 2.4GHz + WLAN 5GHz Band 1 = 0.282 + 0.527 = 0.809 2. WLAN 2.4GHz + WLAN 5GHz Band 3 = 0.282 + 0.168 = 0.450 3. WLAN 2.4GHz + WLAN 5GHz Band 4 = 0.282 + 0.656 = 0.938 Therefore the maximum calculations of above situations are less than the “1” limit. ---END--- Report No.: SA170801C10B Page No. 6 / 6 Report Format Version: 6.1.1 Reference No.: 180808C21


Document Created: 2019-05-05 19:05:11
Document Modified: 2019-05-05 19:05:11
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC