MPE

FCC ID: KA2WL3230APA1

RF Exposure Info

Download: PDF
FCCID_754182

Report No.: FR6N2704 Appendix C. Maximum Permissible Exposure FCC ID: KA2WL3230APA1 Page No. : 1 of 3

Report No.: FR6N2704 1. Maximum Permissible Exposure 1.1. Applicable Standard Systems operating under the provisions of this section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy levels in excess limit for maximum permissible exposure. In accordance with 47 CFR FCC Part 2 Subpart J, section 2.1091 this device has been defined as a mobile device whereby a distance of 0.2 m normally can be maintained between the user and the device. (A) Limits for Occupational / Controlled Exposure Averaging Time Frequency Range Electric Field Magnetic Field Power Density (S) |E|²,|H|² or S (MHz) Strength (E) (V/m) Strength (H) (A/m) (mW/ cm²) (minutes) 0.3-3.0 614 1.63 (100)* 6 3.0-30 1842 / f 4.89 / f (900 / f)* 6 30-300 61.4 0.163 1.0 6 300-1500 F/300 6 1500-100,000 5 6 (B) Limits for General Population / Uncontrolled Exposure Averaging Time Frequency Range Electric Field Magnetic Field Power Density (S) |E|²,|H|² or S (MHz) Strength (E) (V/m) Strength (H) (A/m) (mW/ cm²) (minutes) 0.3-1.34 614 1.63 (100)* 30 1.34-30 824/f 2.19/f (180/f)* 30 30-300 27.5 0.073 0.2 30 300-1500 F/1500 30 1500-100,000 1.0 30 Note: f = frequency in MHz ; *Plane-wave equivalent power density 1.2. MPE Calculation Method E (V/m) ＝ 30 × P × G Power Density: Pd (W/m²) ＝ E2 d 377 E ＝ Electric field (V/m) P ＝ Peak RF output power (W) G ＝ EUT Antenna numeric gain (numeric) d ＝ Separation distance between radiator and human body (m) The formula can be changed to Pd ＝ 30 × P × G 377 × d 2 From the peak EUT RF output power, the minimum mobile separation distance, d=0.2m, as well as the gain of the used antenna, the RF power density can be obtained. FCC ID: KA2WL3230APA1 Page No. : 2 of 3

Report No.: FR6N2704 1.3. Calculated Result and Limit Antenna Type : Printed Max Conducted Power for IEEE 802.11b/g : 20.95dBm Peak Output Power Density Limit of Power Antenna Gain Antenna Gain Peak Output Power (S) Density (S) Test Result (dBi) (numeric) Power ( mW ) (dBm) (mW/cm²) (mW/cm²) 1.05 1.2735 20.9500 124.4515 0.031546 1 Complies Antenna Type : Dipole Max Conducted Power for IEEE 802.11b/g : 20.95dBm Peak Output Power Density Limit of Power Antenna Gain Antenna Gain Peak Output Power (S) Density (S) Test Result (dBi) (numeric) Power ( mW ) (dBm) (mW/cm²) (mW/cm²) 2.1 1.6218 20.9500 124.4515 0.040174 1 Complies FCC ID: KA2WL3230APA1 Page No. : 3 of 3


Document Created: 2007-01-24 18:11:03
Document Modified: 2007-01-24 18:11:03
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC