Modular Approval Request

FCC ID: KA2VAG3810BNA1

Cover Letter(s)

Download: PDF

FCCID_851098

FCC ID: KA2VAG3810BNA1

Modular Approval Request Letter

Advance Data Technology
Oct. 02, 2007

Dear Application Examiner,

D-Link Corporation., It’s Broadcom 11g mini PCI, FCC ID: KA2VAG3810BNA1 would
like to have your authorization as a modular approval specific to the mobile device
such as AP, PC or devices which the antenna can keep 20cm from the user…etc.

The requirements of Public Notice DA00-1407 have been met and shown on the
following statements.

1. “The modular transmitter must have its own RF shielding.” The radio portion of
this module has been shielded, please see exhibition External Photo.

2. “The modular transmitter must have buffered modulation/data inputs.” The EUT
has buffered data inputs, it is integrated in chip BCM4318.

3. “The modular transmitter must have its own power supply regulation.” The part
number of this regulator is AME8805.

4. “The modular transmitter must comply with the antenna requirements of section
15.203 and 15.204(C).” The EUT meets the FCC antenna requirements. The
spurious emission, unique antenna connector and photo of antennas are shown
in the test report.

5. “The modular transmitter must be tested in a stand-alone configuration” The EUT
was tested in a stand-alone configuration via a PCMCIA to mini-PCI extender.
Please see section Photographs of Test Configuration in the test report, the EUT
was plugged in this extender.

6. “The modular transmitter must be labeled with its own FCC ID number.” Please
see exhibition Label Sample for the FCC ID of this module. And also in the
exhibition Users Manual, there are instructions give to the OEM on how to label

Report No.: RF960904L04A

Document Created: 2007-10-03 16:11:10
Document Modified: 2007-10-03 16:11:10

© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC