Modular Request

FCC ID: KA2T1130

Cover Letter(s)

Download: PDF
FCCID_349864

FCC ID: KA2T1130



         Modular Approval Request Letter

Advance Data Technology
July 25, 2003



Dear Application Examiner,


D-Link Corporation, Inc.’s 2.4GHz/54Mbps Wireless MINI PCI Card, FCC ID:
KA2T1130, would like to have your authorization as a modular approval specific to
the mobile device such as access point and router. The requirements of Public Notice
DA00-1407 have been met and shown on the following statements.

1. “The modular transmitter must have its own RF shielding.”: The radio portion of
   this module has been shielded, please see exhibition External Photo.

2. “The modular transmitter must have buffered modulation/data inputs.” The EUT
   has buffered data inputs, it is integrated in chip IPN2120a.

3. “The modular transmitter must have its own power supply regulation.” The chips
   IF converter and RF/IF converter which will influence the frequency radiation,
   have to be 2.5V DC powered. The mini-pci interface provides 3.3VDC, so there
   are regulators in front of these chips, the part number of this regulator is
   AME8801.

4. “The modular transmitter must comply with the antenna requirements of section
   15.203 and 15.204(C).” The EUT meets the FCC antenna requirements. The
   spurious emission, unique antenna connector and photo of antennas are shown in
   the test report.

5. “The modular transmitter must be tested in a stand-alone configuration” The EUT
   was tested in a stand-alone configuration via a PCMCIA to mini-PCI extender.
   Please see section Photographs of Test Configuration in the test report, the EUT
   was plugged in this extender.

6. “The modular transmitter must be labeled with its own FCC ID number.” Please
   see exhibition Label Sample for the FCC ID of this module. And also in the
   exhibition Users Manual, there are instructions give to the OEM on how to label
   the end product.




ADT No.920617R08


FCC ID: KA2T1130



7. “The modular transmitter must comply with any specific rule or operating
   requirements applicable to the transmitter and the manufacturer must provide
   adequate instructions along with the module to explain any such requirements.”
   The EUT is compliant with all applicable FCC rules. Detail instructions for
   maintaining compliance are given in the Users Manual.

8. “The modular transmitter must comply with any applicable RF exposure
   requirements.” The EUT is compliant with all applicable RF exposure
   requirements. RF Exposure is addressed in the RF exposure exhibition.



Please contact me if you have any further questions. Thanks for your attention.




Best Regards,

Dr. Alan Lane
J. VP
Advance Data Technology




ADT No.920617R08



Document Created: 2003-08-17 16:11:30
Document Modified: 2003-08-17 16:11:30

© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC